FCRG3052BWA Frigidaire Range - Overview
Sections of the FCRG3052BWA
[Viewing 5 of 5]
Keep searches simple, eg. "belt" or "pump".
Leveling Leg
PartSelect #: PS977569
Manufacturer #: 316272900
This part is sold individually. The leveling leg is black in color and measures approximately 2 inches in length. It is made of plastic. The leveling leg is found underneath your range and may crack o...
$21.95
In Stock
Lp Conversion Kit
PartSelect #: PS17220893
Manufacturer #: GRLP5
This LP Conversion kit, complete with instructions, allows you to convert your natural gas range to use liquid propane. Easy to install, it ensures optimal performance of your appliance
$41.95
In Stock
Range Control Knob (White)
PartSelect #: PS12114548
Manufacturer #: 5304507387
This is a replacement burner knob for your range. It is made of plastic. The knob allows you to turn on and adjust the heat level of the range. If the knob is stripped so badly that the shaft will not...
$28.95
In Stock
SPARK MODULE
PartSelect #: PS11770793
Manufacturer #: 808608804
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
$66.59
In Stock
REGULATOR
PartSelect #: PS8760219
Manufacturer #: 316091711
This is a genuine use wci regulator, which works with ranges.
$75.41
In Stock
Range Valve
PartSelect #: PS11770502
Manufacturer #: 5304506548
Presenting the Surface Burner Valve from Frigidaire, an essential component for your range. This genuine OEM part, recognized by its distinct green color on the flat side of its stem, ensures the seam...
$60.34
In Stock
Screw - 10-16 x .486
PartSelect #: PS438422
Manufacturer #: 316089500
This screw is for the drawer handle on a range or oven.
$21.95
In Stock
Rack
PartSelect #: PS16731592
Manufacturer #: 5304531722
Measurements: approximately 22 7/8" x 16 1/4"
$53.30
In Stock
Questions And Answers for FCRG3052BWA
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the FCRG3052BWA
[Viewing 5 of 5]Gas igniter glows, but will not light
Fixed by
these parts
these parts
Show All
Little to no heat when baking
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Element will not heat
Fixed by
these parts
these parts
Show All
Gas smell
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oven wouldn't heat - broiler and burners worked fine-Bake Burner Igniter didn't work
It was the week before Thanksgiving and we didn't know what to do without an oven. I did some research on Google and of all the websites out there, I found a decent price here at Parts Select and ordered it on Friday. I was shocked when FEDEX pulled up to the door on Saturday afternoon. I went online to youtube and found a step by step
... Read more
video specifically for this part. It's posted by the Repair Clinic. http://www.youtube.com/watch?v=cLxKoF16gac. I was able to fix the part and probably saved at least $150.00 for a service call and repair time. The part cost about $90 and I was done in less than 15 minutes. We just got this stove about 2 years ago and I'm thinking maybe we could have saved my old stove since it had the same problem. Great job Parts Select - I got just what I needed and saved a ton of money in the process. Thanks also for their great informative video online. We had a great Thanksgiving and were very thankful for all our hot food fresh from the oven.
Read less
Parts Used:
-
Debbie from Rockford, MI
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
190 of 229 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The oven would not ignite on bake setting
After reading a lot of reviews online, I came to the conclusion it was the bake igniter. The "glow rod" would glow but would not ignite the oven. The broiler would ignite and the top burners would work. I removed the racks, took a screwdriver and removed the 2 screws in the back corners. I then slid the bottom shield towards the back then
... Read more
lifted up and the shield came off and exposed the flame shield. I removed the screws the hold that in place on the front of the oven with my 6 way screwdriver. I used the nutdriver part. Lifted that off which exposed the the actual flame tube and bake igniter. There were two screws, used the nutrdiver on the 6 way screwdriver, holding the bake igniter on. The screws are on the side of it. Removed those and the igniter came free. I pulled out the warming drawer and followed the wire from the igniter to a wiring harness. Pulled that apart and pulled the whole thing out through the oven. Got the new part, reversed order of removal. Fired right up. Pretty pricey part. But, saved 500+ dollars for a new range. Actual removal and install of new part, maybe 20 minutes if that. Super easy.
Read less
Parts Used:
-
Michael from NOBLESVILLE, IN
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
16 of 17 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven would not ignite, gas smell, igniter glows
Disconnected power, I removed the igniter from oven. Measured the resistance (275 ohms) and then the current draw. DO NOT ATTEMPT THIS UNLESS YOU ARE ABLE TO ACCOMPLISH THIS SAFELY. I made a harness and connected the old igniter to 110 V ac, Current draw thru the meter settled at 2.7 Amps. Too weak to fully open gas valve. Valve require
... Read more
s 3.2 - 3.6 amps to fully operate properly. New igniter measured 300 ohms and current draw was 3.4 amps. Installed new part and everything works fine. Correct part and good service from this site
Read less
Parts Used:
-
John from PORT JEFF STA, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers, Socket set
10 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!