ERDE48LP Dacor Range - Overview
Sections of the ERDE48LP
[Viewing 12 of 12]Keep searches simple, eg. "belt" or "pump".

Service O-Ring Burner
PartSelect #: PS16631811
Manufacturer #: DE81-08744A
This is a burner head O-ring and is used in conjunction with your range cooktop. The purpose of the O-ring is to sit between the range cooktop and the burner head assembly. This part will create a sea...
$48.95
In Stock

SVC-FILTER CONVECTION OVEN;82891,DO130
PartSelect #: PS16629177
Manufacturer #: DE81-04961A
No Longer Available

SVC-THERMAL SW HI TEMP CUTOU;82987,DR30D
PartSelect #: PS16628411
Manufacturer #: DE81-03938A
$35.95
In Stock

Halogen Light Service Transformer
PartSelect #: PS16628283
Manufacturer #: DE81-03753A
$169.87
In Stock

SVC-MICRO SWITCH SET ESG366;86576,ERSD48
PartSelect #: PS16628911
Manufacturer #: DE81-04591A
$17.95
In Stock
Manuals & Care Guides for ERDE48LP
Click to downloadQuestions And Answers for ERDE48LP
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
F2 Alarm and oven beeping
-
David from CAMILLUS, NY
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced bottom relay control panel
First disconnected power to the oven at circuit breaker box. Then, Removed top front control panel, held by four screws exposed when top oven door is opened. Was able to move control up and out of the way without disconnecting. The relay control panel is visible on the right. I was able to reach all connectors with needle nose plie
... Read more
rs and then remove the panel with needle nose to release clips and use screw driver to gentle pry up. Installed new unit by attaching back connectors and then setting panel down onto clips. Finished with attaching front connectors. Reattach front control panel.
Read less
Parts Used:
-
David from BUENA VISTA, CO
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Flame was not even all around.
Cleaned the brass ring and replaced the cap.
New brass rings may be an improvement too.
New brass rings may be an improvement too.
Parts Used:
-
Keith from MIAMI, FL
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!