EB480 Shindaiwa Leaf Blower / Vacuum - Overview
Sections of the EB480
[Viewing 14 of 14]
Keep searches simple, eg. "belt" or "pump".
Trimmer Purge Bulb
PartSelect #: PS8858167
Manufacturer #: 12318140630
The Primer Pump, aka the Pump Bulb, is a clear, individually sold, plastic part, sourced from the original equipment manufacturer. It has an Outer Diameter of 0.616 Inches, 15.66mm and is 0.558 Inches...
$5.95
In Stock
Chainsaw Fuel Filter
PartSelect #: PS11826309
Manufacturer #: A369000460
The Fuel Filter is a white and silver, individually sold, steel part. It reuires pliers to install and its installation is rated as Easy.
The part attaches inside of the fuel tank and is used to cle...
$8.60
Special Order
Trimmer Nut
PartSelect #: PS8969875
Manufacturer #: 43302206460
This OEM Nut is a silver, metal, individually sold part. It can be installed using a wrench or socket by torquing to the manufacturer specifications.
This part may become damaged over time due to fa...
$5.95
In Stock
Trimmer Nut
PartSelect #: PS9148697
Manufacturer #: 90050000005
This OEM nut is a 5mm, gold, metal nut, which is sold individually. It can be installed with a Wrench or Socket and Torque Wrench by torquing to the manufacturer specifications. This nut is used to se...
$5.95
In Stock
Trimmer Breather Assembly
PartSelect #: PS9314032
Manufacturer #: A356000040
This breather, also known as a fuel tank vent, is a genuine OEM replacement part used in trimmers and edgers. It is responsible for managing the pressure and air flow inside the fuel system, by acting...
$6.39
In Stock
Trimmer Gasket
PartSelect #: PS9237390
Manufacturer #: V107000010
This individually sold fuel gasket is designed for use with handheld lawn and garden equipment and is the seal for the gas cap. This gasket is a genuine OEM part made of a composite material and will ...
$5.19
In Stock
Trimmer Fuel Cap Assembly
PartSelect #: PS9180313
Manufacturer #: A033000070
This fuel cap assembly is a genuine OEM part and is designed for use with outdoor handheld power equipment. Replacing your fuel cap is as simple as removing the old one and screwing the new cap on. Th...
$5.19
In Stock
Trimmer Clip
PartSelect #: PS9238696
Manufacturer #: V490000500
This OEM Clip is a silver, steel part, which is sold individually. The part secures the fuel line to the fuel filter and is rated as Easy to install.
You will know you need a new one if there is a l...
$5.95
In Stock
Trimmer Fuel Line Grommet W/Vent Tube
PartSelect #: PS9238663
Manufacturer #: V470000890
$5.69
In Stock
Trimmer Primer Pump Cover
PartSelect #: PS8857330
Manufacturer #: 12314205560
This genuine Primer Cover, or Primer Pump Cover, is a silver, individually sold, steel part with dimensions of around 1x1 inch.
This part is installed using a screwdriver, and is rated as Easy to ins...
$5.95
In Stock
Questions And Answers for EB480
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Replace clogged fuel filter.
Thru fuel cap, insert copper wire with hook formed on end. Fish around until you grab the fuel line. Pull the fuel line and filter thru the fuel fill neck.
Pull off old filter and replace with new. Push back into fuel tank & be done.
Pull off old filter and replace with new. Push back into fuel tank & be done.
Parts Used:
-
Keith from NORWOOD, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
24 of 42 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!