Back
Back
Keep typing for more specific results...

C2001-WK (Type 0) Porter Cable Compressor - Overview

Sections of the C2001-WK

[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
Cylinder Kit – Part Number: N036517
Cylinder Kit
PartSelect #: PS10116517
Manufacturer #: N036517
$45.20
  Special Order
Manifold – Part Number: A16181
Manifold
PartSelect #: PS10115324
Manufacturer #: A16181
$87.82
  Special Order
Brush Motor 3HP UMC – Part Number: Z-A02125
Brush Motor 3HP UMC
PartSelect #: PS10116663
Manufacturer #: Z-A02125
  No Longer Available
Gauge 1.5 300PSI 1/8 – Part Number: GA-373
Gauge 1.5 300PSI 1/8
PartSelect #: PS10116089
Manufacturer #: GA-373
  No Longer Available
Air Compressor Drain Valve – Part Number: N286039
Air Compressor Drain Valve
PartSelect #: PS10049094
Manufacturer #: N286039
$6.55
  Special Order
Wire Jumper 18 Ga Ye – Part Number: A04772
Wire Jumper 18 Ga Ye
PartSelect #: PS10115117
Manufacturer #: A04772
$8.20
  Special Order
Wire Jumper 18 Ga – Part Number: A04771
Wire Jumper 18 Ga
PartSelect #: PS10115116
Manufacturer #: A04771
$6.32
  Special Order
Tube Outlet 5/16 OD – Part Number: A02124
Tube Outlet 5/16 OD
PartSelect #: PS10115048
Manufacturer #: A02124
  No Longer Available
Tube Isolator – Part Number: N136310
Tube Isolator
PartSelect #: PS10116580
Manufacturer #: N136310
  No Longer Available
Valve Check 1/2NPT X – Part Number: A19713
Valve Check 1/2NPT X
PartSelect #: PS10115359
Manufacturer #: A19713
  No Longer Available
Air Compressor Hose Clamp – Part Number: CAC-1206-1
Air Compressor Hose Clamp
PartSelect #: PS10043561
Manufacturer #: CAC-1206-1
$5.95
  Special Order
Shroud Right – Part Number: 1000002761
Shroud Right
PartSelect #: PS10105864
Manufacturer #: 1000002761
$13.77
  Special Order

Questions And Answers for C2001-WK

Be the first to ask our experts a question about this model!

Common Symptoms of the C2001-WK

[Viewing 1 of 1]
Air leak
Fixed by
these parts
Fixing Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Worn piston rod and sleeve
Disassemble plastic housing around compressor unit using appropriate tools. Remove the four bolts from the compressor head using a 5/16 nut driver. Carefully remove head assembly including airline. Remove bolt through rod bearing with Allen wrench.

Reassemble with new rod and piston assembly. Best to use blue locktite on bolt through rod bearing when reassembling. Make sure to torque all bolts to specs listed.
Parts Used:
Air Compressor Connecting Rod Assembly
  • Donald from BRYAN, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!