All Installation Instructions for Amana Range AGG222VDW6

over-all different problems with esate.

Very easy to replace.

Parts Used:

Dryer Door Handle (White)

steve from carol stream, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

15 of 37 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Two of four gas surface burners would not ignite.

Replace two igniters that were not working. Did not fix the problem. Swapped wire positions from Spark Module and noted that the problem followed the igniter positions. Replaced Spark Module. Problem solved. Procedure required disconnecting a/c power, removing four screws, removing igniter wires from old module and reconnecting them to new module. Reinstalled new Spark Module in range. Reconnected a/c power. Test successful. Total time: 20 minutes.

Parts Used:

Range Surface Igniter

Gervice from BROUSSARD, LA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broken door pull

Removed the door replaced the pull. Very easy repair

Parts Used:

Dryer Door Handle (White)

Paul from RICHLAND, NJ
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

gasket ripped in half

installed new gasket

Parts Used:

SEAL, BROILER DOOR

Marion E. from Warminster, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

I had a broken door handle on my stove, and a missing burner cap.

We just put the new burner cap on the stove, and my husband just slipped the new handle on the stove.

Parts Used:

Range Burner Cap (Black)

Dryer Door Handle (White)

Jennifer from Victorville, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins

Was this instruction helpful to you?

Thank you for voting!

Pilot tubing developed leak at clamp location

I disconnected gas line and removed screws holding the 4 pilot assembles, lifted the top of stove and removed and replaced the tubing. Pretty straight forward installation..

Parts Used: