Parts That Fix Amana Dishwasher ADB1300AFW1 Not cleaning dishes properly

This manufacturer-certified heating element is used to create heat during the dry cycle and increase water temperature during portions of the wash cycle when certain options are selected. If your dishes are not drying or the water in the dishwasher is not getting hot you may need to replace the element. This kit includes the heater, two heater fasteners, and is a genuine OEM part. Please remember to disconnect the power before starting the repair. Use a multi-meter to test your heating element for continuity to determine whether this is the part that is causing your symptom. This part does not include any washers. To make your repair, disconnect the wires from the bottom of the element in the back, remove the plastic nuts holding it in place, remove the element, and repeat these steps in reverse order to install your new part. This is an easy repair that requires only a screwdriver, wrench set, and should take less than 30 minutes.

This circulation pump is a genuine OEM replacement part designed for use in dishwashers. It is responsible for circulating water throughout the dishwasher during the wash and rinse cycles. The circulation pump draws water from the dishwasher tub, pressurizes it, and then distributes it to the spray arms, which spray the water onto the dishes to remove food particles and debris. The circulation pump may fail due to several reasons such as an electrical fault, a blockage in the pump impeller, motor failure, or physical damage. A faulty pump will result in water leakages, unusually loud noises during use, reduced water circulation, and poor cleaning performance.

This filter works with the water pump in your dishwasher. It prevents debris from entering the pump and causing damage. As a result, the filter can occasionally become clogged or damaged, and will need to be replaced. A good indication of a damaged filter is if your dishwasher is not draining or cleaning the dishes properly. This filter has a gray plastic top and bottom that are approximately 5 inches in diameter. This is a genuine OEM part that comes directly from the manufacturer. To replace the filter, simply turn it counterclockwise to unlock, and then screw in the new filter

This lower spray arm is a key component in your dishwasher’s cleaning system, rotating during the wash cycle to evenly distribute water across dishes for thorough cleaning. Made from durable materials for long-lasting performance, it helps improve overall efficiency and can resolve issues such as poor cleaning results. Compatible with a range of dishwasher models, this part is a direct replacement for the original and installs easily to restore optimal function.

Introducing the Whirlpool Upper Spray Arm, a genuine OEM part designed specifically for use in Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef dishwasher models. This upper spray arm serves an essential function, rotating and spraying water to clean the dishes inside your dishwasher tub. The upper spray arm assembly ensures maximum efficiency and cleanliness with each wash cycle. Despite appearances, parts may vary in size and shape, so please ensure this part matches your model precisely before ordering. Wearing work gloves is recommended to protect your hands during the repair process. Choose Whirlpool for reliable, high-quality dishwasher repairs.

This is a screen filter, designed to keep food particles, gunk, and debris from entering the pump of your dishwasher. If this filter is missing, damaged, or simply unusable, it will need to be replaced so you can effectively clean your dishes. Replacing this filter is simple, as you only need to twist and remove the lower filter, before you can carefully lift this filter out. This filter is an OEM part and is sold individually.