954569790 Husqvarna Lawn Mower - Overview
Models starting with 954569790
Click on the best match to narrow your results.
- 954569790 (2003-02) Husqvarna Lawn Mower (Husqvarna Lawn Mower Model 954569790/2003-02 (954569790/200302, 954569790/2003 02) Parts)
- 954569790 (2002-12) Husqvarna Lawn Mower (Husqvarna Lawn Mower Model 954569790/2002-12 (954569790/200212, 954569790/2002 12) Parts)
- 954569790 (2003-01) Husqvarna Lawn Mower (Husqvarna Lawn Mower Model 954569790/2003-01 (954569790/200301, 954569790/2003 01) Parts)
Keep searches simple, eg. "belt" or "pump".
Lawn Mower Flange Wheel Bearing
PartSelect #: PS9006914
Manufacturer #: 532009040
The OEM bearing, also known as the flange bearing, is silver, made of metal, and sold individually. It is used on riding mowers to secure the wheel in place and allow it to rotate freely on the shaft....
$9.18
In Stock
Lawn Mower Ring Clip
PartSelect #: PS9143890
Manufacturer #: 812000029
The Ring Klip Number T5304-75, also known simply as a ring clip, is an OEM part designed to secure your mower wheel to its axle.
This part is black, made of metal, and around an inch in length. It i...
$5.95
In Stock
Lawn Mower Hex Head Bolt
PartSelect #: PS9982804
Manufacturer #: 584953901
This part is the replacement washer head screw for your lawn tractor. It is black in color and is approximately an inch and a half in length. This self-threading screw is most commonly used for securi...
$3.99
In Stock
Lawn Mower Washer
PartSelect #: PS9008998
Manufacturer #: 532121749
This OEM washer, also known as a flat washer, has dimensions of 25/32 x 1-1/4. Silver in color and metal, the washer is sold individually. Although this part can have a range of applications depending...
$3.99
On Order
Lawn Mower Axle Hub Cap
PartSelect #: PS9007667
Manufacturer #: 532104757
This genuine black cap axle, also sometimes known as the dust cap, is around 2 inches in diamater and sold individually. Comprised of plastic, it is designed to keep debris out of the hub and axle of ...
$5.95
In Stock
Lawn Mower High Lift Blade
PartSelect #: PS9286056
Manufacturer #: 532138971
This replacement blade is supplied directly from the original equipment manufacturer for use with Craftsman riding lawn mowers and garden tractors. It is secured under the deck to cut the grass, over ...
$19.09
In Stock
Lawn Mower Hairpin Clip
PartSelect #: PS9007536
Manufacturer #: 532003146
This hairpin clip, also known as a cotter pin, is a genuine OEM sourced part used to secure rotating components together in various outdoor power equipment. It is made of steel and is approximately 1....
$3.99
In Stock
Bolt Shoulder (5/16-18)
PartSelect #: PS9012889
Manufacturer #: 532170165
This metal shoulder bolt, which is also called a shoulder screw or a stripper bolt, is a fastener that has a shoulder between the threaded and unthreaded sections of the bolt. This shoulder is a smoot...
$4.99
On Order
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Wheel bushings were bad
Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat
... Read more
other side.
Read less
Parts Used:
-
Anthony from OLIVEHILL, TN
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
22 of 36 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed to replace the bent blades on my riding mower.
- Made the mower safe to work on the blades (remove spark plug wires, etc.)
- Raised the mower to get access to the blades, wedged a wood block against the blade.
- Used impact driver with socket to remove bolt holding blade.
- Removed blade, replaced with new, replaced bolt and tightened with impact drive ... Read more r, ..... and you know the rest.
- Raised the mower to get access to the blades, wedged a wood block against the blade.
- Used impact driver with socket to remove bolt holding blade.
- Removed blade, replaced with new, replaced bolt and tightened with impact drive ... Read more r, ..... and you know the rest.
Read less
Parts Used:
-
Trace from LISLE, IL
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
16 of 21 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Take the wheel off. Place the key in the slot. Put the wheel back on.
-
Gary from PILESGROVE, NJ
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
5 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!