8261 - Overview
Models starting with 8261
Click on the best match to narrow your results.
- 8261 Snapper Snow Blower (26" 8 Hp Two Stage Large Frame Snow Thrower Series 1)
- 8261 (86559) Snapper Snow Blower (26 Inch Snow Thrower, 8hp)
- 826124 (Quik Reel) Graco Sprayer (Ultimate Max II Electric 695 Airless Sprayer)
- 826124 (Hi-Boy) Graco Sprayer (Ultimate Max II Electric 695 Airless Sprayer)
- 826128 (Hi-Boy) Graco Sprayer (Ultimate Max II Electric 795 Airless Sprayer)
- 826128 (Quik Reel) Graco Sprayer (Ultimate Max II Electric 795 Airless Sprayer)
- 826130 (Hi-Boy) Graco Sprayer (Ultimate Max II Electric 1095 Airless Sprayer)
- 826130 (Quik Reel) Graco Sprayer (Ultimate Max II Electric 1095 Airless Sprayer)
- 826131 (1095) Graco Sprayer (Ultimate Max Electric Hi-Boy Airless Sprayer)
- 826132 (Hi-Boy) Graco Sprayer (Ultimate Max Electric 1595 Airless Sprayer)
- 826132 (Quik Reel) Graco Sprayer (Ultimate Max II Electric 1595 Airless Sprayer)
- 826133 (1595) Graco Sprayer (Ultimate Max Electric Hi-Boy Airless Sprayer)
- 826134 (Quik Reel) Graco Sprayer (Ultimate Max II Electric 1595 Airless Sprayer)
- 826134 (Hi-Boy) Graco Sprayer (Ultimate Max Electric 1595 Airless Sprayer)
- 826135 (1595) Graco Sprayer (Ultimate Max Electric Hi-Boy Airless Sprayer)
- 8261A Eureka Canister Vacuum (Eureka Vacuum Cleaner Model 8261A Parts)
- 8261RB Magic Chef Cooktop (Gas)
- 8261RV Magic Chef Cooktop (Gas)
- 8261RW Magic Chef Cooktop (Gas)
Keep searches simple, eg. "belt" or "pump".
Top Burner Igniter
PartSelect #: PS2082000
Manufacturer #: 74004053
This is a surface burner igniter, also known as a top burner ignitor and stove top spark electrode. It is used to generate the spark that lights the surface burner. If your stove will not start, eleme...
$27.95
In Stock
Burner Head Cap with Spark Electrode
PartSelect #: PS11741732
Manufacturer #: WP3412D024-09
The burner head cap with spark electrode directs the gas to the front and back burner heads and will equally distribute the gas across cooking areas. This part can help the following symptoms: if your...
$63.65
In Stock
Refrigerator Screw
PartSelect #: PS12349731
Manufacturer #: W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
$20.95
In Stock
Range Spark Ignition Module Kit
PartSelect #: PS2003170
Manufacturer #: 12001596
This part may differ in appearance, but functions same as original part. : This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
$69.21
In Stock
Range Top Burner Knob (Black)
PartSelect #: PS11743973
Manufacturer #: WP74001253
This top burner knob is just over two inches in diameter. It is black in color and is made of plastic. This knob has white lettering denoting the off, low, light, and high positions. It also has a red...
$24.95
In Stock
Range Frame Screw
PartSelect #: PS11743908
Manufacturer #: WP7101P126-60
Sold Individually.
$7.95
In Stock
Range Screw
PartSelect #: PS11742292
Manufacturer #: WP4159193
This screw is sold individually.
$9.00
In Stock
Lawn Mower Wing Knob
PartSelect #: PS9999469
Manufacturer #: 703065
This 5/16-18 wing knob is sold individually. It is a plastic part, black in color, that works on a variety of equipment. Its general function is to allow you to quickly loosen, remove, or fold down th...
$7.62
In Stock
Igniter Wire
PartSelect #: PS11742785
Manufacturer #: WP5111A360-60
This igniter wire is twenty-eight inches long.
No Longer Available
Seal Tape
PartSelect #: PS1573896
Manufacturer #: 12400041
This piece of adhesive seal tape is eighty-nine inches long. It is made of black rubber and has a white backing that peels off easily. This seal tape is designed to fit around the drip pans of your appliance.
No Longer Available
Burner Knob
PartSelect #: PS11744697
Manufacturer #: WP7733P045-60
Sold Individually. This knob accepts a D-shaped shaft.
$15.95
In Stock
Common Symptoms of models starting with 8261
[Viewing 5 of 5]Will Not Start
Fixed by
these parts
these parts
Show All
Gas igniter glows, but will not light
Fixed by
these parts
these parts
Show All
Element will not heat
Fixed by
these parts
these parts
Show All
Little to no heat when baking
Fixed by
these parts
these parts
Show All
Gas smell
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
gas burner ignitor failure
Lift out sealed burner assembly rear of stove first while careully sliding to rear to disengage ignitor probes.Remove philips head screws from bottom sheet metal housing to expose bottom of burners Remove gas tube assembly screws and move tube away carefully.Unplug wires from ignitor.Remove screws for ignitor .Remove ignitor, I noticed t
... Read more
hat rust and dirt had built up around burner to pan connection.I used my oil filter wrench to turn slightly the burner to remove it from the pan to clean.Reassembled in reverse order.
Read less
Parts Used:
-
roy from East Providence, RI
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
142 of 162 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No spark at top burners, first one then eventually all 4.
Most of the repair time was spent researching the problem online, locating the spark module inside the range, and selecting the part online. Installation was easy. Key troubleshooting info for me was, if there is no clicking, the spark unit is probably worn-out. I traced the ignition wires from the burners down to the spark module, locate
... Read more
d inside a 2x3" metal housing next to the bottom drawer. I removed 2 screws and out it came. The replacement unit pictured on the PartSelect site was not identical to the original but had the same number of contacts. I ordered the part and it arrived a few days later. The old connectors slipped easily onto the new pins, and I screwed the new unit into the range using the new metal housing. All 4 burners now spark up quickly, and we saved at least $100 on a service call. It was well worth the time and effort -- thanks!
Read less
Parts Used:
-
jonathan from Bryson City, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
33 of 39 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner wouldn't start
Make a quarter turn counterclockwise, disengage a burner head, disconnect 2 wires, connect to a new head, install turn clockwise.
That's it!
That's it!
Parts Used:
-
Yury from Brooklyn, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
35 of 48 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!