Parts That Fix Maytag Washer 7MMVWC565FW1 Shaking and Moving

This genuine OEM suspension rod kit is designed to support the inner tub of your washing machine and minimize vibrations during wash and spin cycles. If your washer has started making loud banging or knocking noises, it could be a sign that the suspension rods are worn or damaged. Replacing them helps prevent the drum from hitting the cabinet and extends the life of your appliance. Each kit includes four suspension rods, springs, and suspension ball cups. It’s recommended to replace all four at once, as they generally wear out at the same rate. This kit fits various washing machine models and offers a reliable fix for noise and stability issues.

This drive hub kit (part number W10528947VP) is for washers. Drive hub kit W10528947VP connects the spin basket to the spin shaft that spins the basket. The kit may include multiple parts; refer to your parts diagram for a complete list of parts included. Unplug the washer before installing this part. Wear work gloves to protect your hands.

This is an impact absorber, also known as a sound dampening pad, for washing machines. This sound dampening pad attaches to the top of your washing machine drum to reduce the severity and harshness of vibrations and movement during the washing and spinning cycle, to produce a quieter laundry experience. If your washer is shaking excessively during operation, this pad may be worn out or simply missing, and in need of replacement. To replace this pad, you will need a screwdriver or wrench to access the inner portion of your washing machine and remove the old one and install the new one. This OEM pad measures 5-inches by 3-inches and is sold individually.

This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the splines on the clutch assembly are stripped and the washer is making noise, or if you are having problems with the wash and spin cycles. You will need to access the bottom of the washer for this repair. It is easiest to if you disconnect your washer from both the water and power source, and lay it on its back. The clutch assembly contains 6 parts, and all are included with the kit. It is also important to change out the entire assembly, rather than individual pieces.