66513932K014 Kenmore Dishwasher - Overview
Sections of the 66513932K014
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Dishwasher Rack Stop Clip
PartSelect #: PS11750071
Manufacturer #: WPW10195622
This manufacturer-approved Rack Stop Clip is a gray plastic part which can be installed with a screwdriver. Measuring slightly over an inch in length, it prevents the rack from sliding too far and fal...
$11.95
In Stock
Dishwasher Tine Pivot
PartSelect #: PS11748190
Manufacturer #: WPW10082853
The tine pivot clip, also known as the tine row pivot, is used in dishwashers and is located in the upper dishrack. At around 3 inches in length, the clip is used to keep the tine row in place in the ...
$9.95
In Stock
Dishwasher Drawer Track
PartSelect #: PS11750072
Manufacturer #: WPW10195623
This drawer track or rack slider bar is for use in your dishwasher. It connects to the upper dish rack, and allows the rack top slide in and out. You may need to replace this part if your old rack wil...
$52.47
In Stock
Dishwasher Spinner Kit
PartSelect #: PS972316
Manufacturer #: 8193983
This is also called the 3rd-level spinner. This part works like a little spray arm at the top of your dishwasher.
$27.23
In Stock
Dishwasher Upper Rack Roller
PartSelect #: PS11753471
Manufacturer #: WPW10350401
This assembly is the wheel and the mount for your upper dishrack. Sold individually. This is an authentic OEM part for use with Whirlpool, KitchenAid, Kenmore and Jenn-Air Dishwashers. The dishrack wh...
$44.95
In Stock
Dishwasher Tine Row Kit Of 2
PartSelect #: PS10057154
Manufacturer #: W10727426
This tine row is for the top rack of your dishwasher, and prevents cups, dishes, and other items from moving around during the cycle. If your current row is missing one or more tines, or the tines hav...
$51.41
In Stock
Dishwasher Door Latch (Black)
PartSelect #: PS8770043
Manufacturer #: W10619006
NOTE: This part has been redesigned, it may appear different but will still function the same as the original.
$33.95
In Stock
Dishwasher Screw
PartSelect #: PS11753384
Manufacturer #: WPW10348409
Sold individually.
$7.95
In Stock
Dishwasher Thermal Fuse
PartSelect #: PS4704481
Manufacturer #: W10402110
This is a replacement thermal fuse for your dishwasher. The thermal fuse is sometimes known as the thermal cutoff. The thermal fuse shuts off the dishwasher if the dishwasher shorts out or overheats. ...
$32.95
In Stock
Dishwasher Upper Dishrack
PartSelect #: PS10057153
Manufacturer #: W10727422
Rack only.
$185.19
In Stock
Dishwasher Clip
PartSelect #: PS11751424
Manufacturer #: WPW10267076
This OEM dishrack guard clip fits on the front of the upper dishrack and acts as a bumper between the rack and inner door panel. This guard clip is approximately 3 inches long and made of plastic. To ...
$23.95
In Stock
Questions And Answers for 66513932K014
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the 66513932K014
[Viewing 5 of 5]Not cleaning dishes properly
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Door latch failure
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
spinner kept falling off
i removed the top screw for the water input to the spinner, which gave me enough room to replace the worn nipple pin that the spinner snaps on to. then snapped the new spinner in place. and then screwed everything back into place.
Parts Used:
-
paul from erie, CO
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
95 of 111 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Borke the spinner off with dishes that were too tall. (Oops!)
1. Put a towel over the bottom of the machine. (In case you drop the screw... duh!)
2. Remove the top screw.
3. Replace the snap pin (pointy end DOWN.)
4. Snap the spinner in place.
5. Replace the screw. (Or go to the hardware store to replace the screw you dropped into the bottom of the ... Read more dishwasher. Dashitall!)
2. Remove the top screw.
3. Replace the snap pin (pointy end DOWN.)
4. Snap the spinner in place.
5. Replace the screw. (Or go to the hardware store to replace the screw you dropped into the bottom of the ... Read more dishwasher. Dashitall!)
Read less
Parts Used:
-
Stephen from Leavenworth, KS
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
47 of 48 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Inoperative door latch replaced by a redesigned latch
1. Disconnect power at the breaker, 2. remove two wood screws fastening the dishwasher to the cabinet and slide the unit out approximately 2 inches. 3. Remove old latch strike and replace with redesigned strike. 4. Slide unit in and reattached to cabinet. 5. Remove 11 screws holding inner panel of door assembly and one screw holding
... Read more
user interface unit to door. 6. Disconnect snap cable to latch assembly and replace the latch unit. 7. Reassemble.
Read less
Parts Used:
-
Arthur from NEWNAN, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
35 of 42 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!