5KSM70SKXRER0 KitchenAid Mixer - Overview
Sections of the 5KSM70SKXRER0
[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
Mixer Bowl Arm Lift
PartSelect #: PS11746961
Manufacturer #: WP9706885
This is a replacement bowl arm lift for your stand mixer. It raises and lowers the mixing arm in the bowl. It is made of white plastic and is sold individually. This part can also be known as the bowl...
$9.45
In Stock
Food Mixer Beater
PartSelect #: PS16875729
Manufacturer #: W11646967
This Flat Beater is used as a mixing attachment for all six quart mixers and some five quart mixers. The Flat Beater is made from metal and has a burnished finish. This part attaches to the mixer on t...
$45.95
On Order
Mixer Bowl Retaining Pin
PartSelect #: PS11740496
Manufacturer #: WP240185
Used for Kitchenaid Stand Mixers.
$9.00
In Stock
Mixer Whipwire
PartSelect #: PS11756675
Manufacturer #: WPW10600940
Introduce a useful addition to your stand mixer with the Whirlpool Wire Whip. This genuine OEM part is optimized for compatibility with various Whirlpool models, ensuring seamlessly operation. This wi...
$62.66
In Stock
Mixer Stand Mixer Hub Cap
PartSelect #: PS11746904
Manufacturer #: WP9703315
Introducing the Whirlpool Stand Mixer Hub Cap, a genuine OEM part carefully designed to work with a wide range of stand mixer models. Whether your kitchen features a Whirlpool, KitchenAid, Maytag, Jen...
$24.95
In Stock
Questions And Answers for 5KSM70SKXRER0
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The mixer would not raise the bowl
I removed the motor assembly from the mixer. This left the stand assembly. The raising lift arm had to be removed by unscrewing the set screw, and then the lift arm was removed. I replaced the plastic arm bowl lift by sliding it over the lift arm, and then I had to remove the spring with a clip washer with the pliers, and replaced the spr
... Read more
ing back on to the new part. Total time about ten minutes for the actual fix, and about 45 minutes remove and reinstall the 12 screws that held the motor in place. It was well worth my efforts. The mixer arm works perfectly now.
Read less
Parts Used:
-
Stephen from Charlotte, NC
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers
11 of 17 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
all four feet on mixer damaged
I first ahd to remove the original feet by removing screws that held them in place. The new feet that I purchased were different then the original. They were a push in type and not held in by screws. I had to modify the base by drilling the foot holder to accept the new style feet. Once this was done, the feet were installed and looke
... Read more
d good.
Read less
Parts Used:
-
ROBERT from ENDWELL, NY
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
5 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dough mixer paddle not turning.
-
Iftikhar from PACIFICA, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
3 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!