Parts That Fix Kenmore Refrigerator 59672002015 Fridge too warm
Introducing the Whirlpool Refrigerator Evaporator Fan Motor, a crucial component for your refrigerator's efficient cooling system. This OEM-certified part is compatible with select models of Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef refrigerators. This evaporator fan motor is responsible for circulating air through the fresh food compartment to ensure optimal cooling. To prevent the deterioration of food, it is advised to unplug the refrigerator before installing this part. Please wear work gloves to protect your hands during installation. Trust in Whirlpool's Motor-Evap for a hassle-free cooling experience.
If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate the cold air into the refrigerator and freezer sections. The fan blade is white in color and made from plastic. This is a genuine OEM part. Please be sure to disconnect the power to your refrigerator before starting your repair.
This is a condenser fan motor for your refrigerator/freezer. This fan motor is most commonly used with frost-free refrigerators with a condenser coil. It controls the rotation of the condenser fan blade. When the compressor runs, so does this fan, circulating air through the refrigerator grille, cooling the compressor and condenser coils. This fan motor also helps to evaporate excess water in the drain pan. This model is all white in color, and is roughly 4 inches long, 3 inches wide, and 3.5 inches thick.
The compressor run capacitor helps keep the motor running smoothly in refrigerators. It works with various models and is a genuine replacement part. Always unplug the refrigerator before installing the capacitor, and check the part number for compatibility with your model.
This air damper control assembly is for refrigerators. The air damper control assembly controls the cold airflow from the freezer compartment into the refrigerator compartment. Unplug the refrigerator before installing this part.
The Compressor Start Relay with Overload is an essential component for refrigerators, designed to ensure your compressor starts efficiently. This genuine OEM part is compatible with various refrigerator models. The relay attaches to the compressor and helps initiate the motor, allowing the refrigerator to operate smoothly. With the built-in overload protection, it also provides a safeguard to prevent potential damage to the compressor. Installation requires safety precautions—be sure to unplug the refrigerator and store any perishable items before proceeding with the repair. Wear work gloves to protect your hands from sharp edges or electrical components during installation. It’s important to follow the manufacturer's guidelines when replacing the start relay, and to verify compatibility with your specific refrigerator model, as slight variations in size or shape may occur between different models.
The door gasket is used to make an air-tight seal for the cabinet when the door is closed.
This door gasket is for refrigerators. The door gasket is on the inner door panel and creates a seal around the door to prevent warm air from entering the refrigerator.
The p-trap drain tube kit may also be known as the duck bill, or the drain pipe, and it is compatible with your refrigerator. The function of the p-trap drain kit is to carry the water that has formed during the defrost cycle to the bottom of the refrigerator, where your drain pan is located. The tools you will need for this repair include a 1/4-inch nut driver and a small flat-blade screwdriver. To do this repair you will need to pull the refrigerator forward in order to reach the lower access panel at the back. This kit includes the tube extension piece and spacer.
Introducing the Whirlpool Defrost Heater, an original OEM component designed specifically to enhance the performance of select Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef models. The core function of this heater is to effectively melt the frost accumulating on the evaporator fins during the appliance's automatic defrost cycle. This process ensures the efficiency of your refrigerator, maintaining ideal conditions for food preservation. Keep in mind, it's advisable to unplug the refrigerator and store perishable food safely when installing this part. For your safety, wearing work gloves during installation can help protect your hands. Prior to ordering, please ensure this part number is correct for your model, as parts may seem similar but may differ in size and shape.