5227 - Overview
Models starting with 5227
Click on the best match to narrow your results.
- 5227 (LZF 966956701 -2008-04) Husqvarna Lawn Mower (Ride Mower)
- 5227-700 Coleman Cooler (40 Quart Green SteelBelted 40 with Polylite Lid)
- 52270 Dynabrade Grinder (.5 HP Offset Die Grinder)
- 52270-W0 General Electric Washer
- 52270-W1 General Electric Washer
- 52270-W2 General Electric Washer
- 52272 Dynabrade Grinder (6mm Straight Line Die Grinder)
- 52274 Dynabrade Grinder (6mm Straight Line Die Grinder)
- 52276 Dynabrade Grinder (.7 HP Straight Line Die Grinder)
- 52277 Dynabrade Grinder (.7 HP Straight Line Die Grinder)
- 52278 Dynabrade Grinder (.7 HP Straight Line Die Grinder)
- 52278B Dynabrade Die Grinder (Robotic .7hp Die Grinder-20k Rrpm)
- 52278BK Dynabrade Die Grinder (Robotic .7hp Die Grinder-20k Rrpm)
- 52279 Dynabrade Grinder (.7 HP Offset Die Grinder)
- 5227A705 Coleman Cooler (40 Quart Burgandy SteelBelted 40 with Polylite Lid)
- 5227B700 Coleman Cooler (40 Quart Green SteelBelted 40 with Polylite Lid)
Keep searches simple, eg. "belt" or "pump".
Drive Belt
PartSelect #: PS16542496
Manufacturer #: WE03X29897
This Drive Belt is 89.5" long and comes in black, featuring four ribs on the inside for a better grip. This is a long belt that wraps all the way around the dryer drum, around a tension pulley, and th...
$49.95
In Stock
Control Knob
PartSelect #: PS418888
Manufacturer #: 131858004
Sold individually. This white knob accepts a D-shaped shaft.
$53.30
In Stock
Screwin Plastic Leveling Leg
PartSelect #: PS1152204
Manufacturer #: 134548800
This is a screw in leveling leg for your washing machine. It supports the appliance by screwing in place to create a stable and flat surface. Take note that you are able to adjust the height of your a...
$22.95
In Stock
Door Strike
PartSelect #: PS455020
Manufacturer #: 5303207102
The door strike is attached to the door of your dryer and holds the door closed. If your dryer door is not closing, this might be due to the door strike needing to be replaced. This is a simple repair...
$28.95
In Stock
DRYER LINT FILTER
PartSelect #: PS12741280
Manufacturer #: WE16X29397
This is the replacement lint filter for your dryer. The lint filter traps unwanted lint and debris so your dryer can effectively dry your clothes.
No Longer Available
Timer Knob - Dryer
PartSelect #: PS755794
Manufacturer #: WE01X10160
Used with washer/dryer combo machines. This knob takes a D-shaped shaft.
$66.59
In Stock
Tension Idler Pulley
PartSelect #: PS418897
Manufacturer #: 131862900
The idler pulley on your washing machine allows the drive belt to operate smoothly. If your washer is not spinning or agitating, makes too much noise, or you notice a burning smell when it is operatin...
No Longer Available
Screw
PartSelect #: PS417463
Manufacturer #: 131302800
This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. T...
$21.95
In Stock
Exact Part matches for your search term
[Viewing 3 of 3]
Screw
This part number matches the current model number 5227
PartSelect #: PS12279072
Manufacturer #: 5227
No Longer Available
Drain valve
This part number matches the current model number 5227
PartSelect #: PS16572375
Manufacturer #: 5227
No Longer Available
CONTROL PANEL
This part number matches the current model number 5227
PartSelect #: PS17995473
Manufacturer #: 5227
No Longer Available
Common Symptoms of models starting with 5227
[Viewing 12 of 12]Noisy
Fixed by
these parts
these parts
Show All
Drum Not Spinning
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Will not drain
Fixed by
these parts
these parts
Show All
Won’t Start
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Will not agitate
Fixed by
these parts
these parts
Show All
Burning smell
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Spins slowly
Fixed by
these parts
these parts
Show All
Touchpad does not respond
Fixed by
these parts
these parts
Show All
Heat stays on after drum has stopped
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Drum belt broke
Removed the front Dryer panel. Left drum in place and lifted it up slightly to get access to motor drive. Slipped belt in place and put panel back on.
This was a first attempt ever at fixing an appliance and it was no big deal.
This was a first attempt ever at fixing an appliance and it was no big deal.
Parts Used:
-
Adrian from Middletown, MD
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
199 of 291 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lid Lock Assembly broke
The Lid Lock Assembly came super fast! The install would have been flawless, but the "pre-drilled" holes on the new Lid Lock Assembly were way to small. We found that out after we had reconnected the wires and gotten it into place. Aside from that small set back, the install went great! This repair is definitey not one that you would
... Read more
need to pay a repair person to do!
Read less
Parts Used:
-
Jenessa from Tacoma, WA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
75 of 94 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Dryer Belt
I had to take most of the dryer apart because there is no rear access to the motor. It turned out to be easy to dissasembel the dryer. The only problem that I had was that I could not figure out how to route the belt around the motor and the idol pullies. I could not find anywhere that gave instructions on how to properly tension the belt
... Read more
. I finally figured out that the idoler pulley needs to be locked in place on the right side of the engie mount. Then the belt needs to be routed over idoler pulley and under the motor pulley. Finally release the idoler pully from the locked postion to put tension on the belt. It really turned out to be pretty easy.
Read less
Parts Used:
-
Richard from Ashton, MD
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Screw drivers
70 of 107 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!