51930 - Overview
Models starting with 51930
Click on the best match to narrow your results.
- 51930 (2003) Toro Trimmer (17" Gas Trimmer)
- 51930 (230000001 - 999999999) Toro Trimmer (String Trimmer)
- 5193004 Frigidaire Air Conditioner (AIR CONDITIONER)
- 5193004A Frigidaire Air Conditioner (AIR CONDITIONER)
- 5193004B Frigidaire Air Conditioner (AIR CONDITIONER)
- 51930A Toro Trimmer (Curved-Shaft Trimmer)
- 51930A (230000001 - 999999999) Toro Trimmer (String Trimmer)
- 51930B Toro Trimmer (Curved Shaft String Trimmer)
Keep searches simple, eg. "belt" or "pump".
Spool Retainer - Black
PartSelect #: PS9937839
Manufacturer #: 308042002
This spool retainer is sourced from the equipment manufacturer for use in trimmers. It is a plastic knob, measuring 2 inches in diameter, with a threaded metal bolt in the center. The retainer has a r...
No Longer Available
Trimmer Grass Deflector Assembly
PartSelect #: PS10051753
Manufacturer #: T308744001
This grass deflector acts like a shield so that grass clippings are directed away from you and the surrounding areas while you are operating your trimmer. It is often located near the bottom of your t...
No Longer Available
Air Filter
PartSelect #: PS9980509
Manufacturer #: 5687301
The OEM Air Filter is used to stop debris and particles from entering the carburetor and engine, which could cause damage. It is attached in the air filter housing. It comes in black, and is contructe...
No Longer Available
Trimmer Spark Plug
PartSelect #: PS10018287
Manufacturer #: 870174001
This spark plug is a genuine OEM part that is used on gas-powered lawn and garden equipment. It is a small cylindrical device in the engine cylinder head that creates the spark that ignites the fuel a...
$5.89
Special Order
Trimmer Fuel Tank Assembly
PartSelect #: PS12145040
Manufacturer #: 308675063
The manufacturer-certified Fuel Tank Assembly is part of a kit including the fuel lines, fuel cap, and fuel filter. It will require a screw driver, and socket set, and is rated as "Easy" to install (T...
No Longer Available
Spring
PartSelect #: PS9869937
Manufacturer #: 06713
Springs are used within outdoor power equipment to provide tension and shock absorption, depending on their application and use. This spring is designed for use within trimmers/brush cutters and is ma...
No Longer Available
Blower Wheel
PartSelect #: PS470787
Manufacturer #: 5304404774
If your air conditioner is making an unusual noise, the problem could be with the blower wheel, or its fans. The motorized fan in an air conditioner pulls air through the filter and over the cold evap...
$121.47
In Stock
Exact Part matches for your search term
[Viewing 1 of 1]
Governor Assembly
This part number matches the current model number 51930
PartSelect #: PS10338144
Manufacturer #: 51930
$170.28
In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
My A/C unit quit working on the hottest day of the year! I had this A/C unit for 13 years and I just knew I'd never find a fan blade for the same make and model, so I tried to go purchase a new one but couldn't find one big enough since it was so late in the season.
After receiving the fan blade, I popped off the old one and put on the new one! The A/C unit worked like new once again!! It even blew colder air than before! The hardest part about the entire process was getting the13 year old fan blade off! I'd recommend your website to anyone looking for a part!
Thank you for all your help!!
Thank you for all your help!!
Parts Used:
-
Tracy from Morgantown, WV
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
15 of 20 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fan blade broke - it wouldn't cool
2001 Window AC/Heat Unit.
I ran across your web site and ordered the fan $70.00, telling myself that if we could fix it we saved $650.00. A new - window air conditioner is over $700.00 for heat and air.
Believe it or not the two of us oldies put it up on the desk on CARDBOARD so we wouldn't scratch the desk (my husband wo ... Read more uldn't have thought of that - that's why God made man -a woman). I vacuumed everything I could see to clean which made it more bearable to breathe. Then we had to decide how to get the old fan off and the new one on. They don't make these things to repair. We actually took out more screws than we needed to but that's ok. There are 3 legs in there that needed to be unscrewed so we could pull out the heating coils enough to replace the fan. One of the 3 legs was difficult to maneuver because of the tight space so my husband and his brawn decided to cut a hole in the medal on the right side. He did it a little unconventionally but it still solved the problem of the 3rd screw without affecting anything else. We both had to pull on the heating coil to slip it up out of the bottom pan without breaking anything else but we managed. We got the old fan blade off and the new one on. Two heads are always better than one. We did it and it works with a savings of $650.00.
Your website saved us a heap of money. We have already started telling others about it.
I ran across your web site and ordered the fan $70.00, telling myself that if we could fix it we saved $650.00. A new - window air conditioner is over $700.00 for heat and air.
Believe it or not the two of us oldies put it up on the desk on CARDBOARD so we wouldn't scratch the desk (my husband wo ... Read more uldn't have thought of that - that's why God made man -a woman). I vacuumed everything I could see to clean which made it more bearable to breathe. Then we had to decide how to get the old fan off and the new one on. They don't make these things to repair. We actually took out more screws than we needed to but that's ok. There are 3 legs in there that needed to be unscrewed so we could pull out the heating coils enough to replace the fan. One of the 3 legs was difficult to maneuver because of the tight space so my husband and his brawn decided to cut a hole in the medal on the right side. He did it a little unconventionally but it still solved the problem of the 3rd screw without affecting anything else. We both had to pull on the heating coil to slip it up out of the bottom pan without breaking anything else but we managed. We got the old fan blade off and the new one on. Two heads are always better than one. We did it and it works with a savings of $650.00.
Your website saved us a heap of money. We have already started telling others about it.
Read less
Parts Used:
-
Bobalee from Loganville, GA
-
Difficulty Level:Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Pliers, Screw drivers, Socket set, Wrench set
5 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fan blades were Broken and making loud noise
Pulled airconditioner out of Housing. Removed screws holding plastic cover in place. Loosened lock ring. Removed old fan blades and replaced with new fan blades. Reassembled plastic cover and returned air conditioner to housing. The unit is now quieter than before!
Parts Used:
-
Eric Peterson from Blakeslee, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
4 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!