4GWTW4740YQ1 Whirlpool Washer - Overview
Sections of the 4GWTW4740YQ1
[Viewing 5 of 5]
Keep searches simple, eg. "belt" or "pump".
Washer Drive Pulley
PartSelect #: PS10057144
Manufacturer #: W10721967
This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
$37.76
In Stock
Washing Machine Suspension Rod Kit
PartSelect #: PS11703290
Manufacturer #: W10780048
This suspension rod kit is a genuine OEM kit specially designed for washing machines. Each kit includes a set of 4 rods, 4 suspension balls and 4 bushings. The suspension rods are responsible for supp...
$60.25
In Stock
Washer Drive Belt
PartSelect #: PS11747978
Manufacturer #: WPW10006384
The main drive belt is designed to ride on the pulley until the basket gets up to speed.
$28.33
In Stock
Dryer Screw
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$7.95
In Stock
Washer Hose Clamp
PartSelect #: PS11743008
Manufacturer #: WP596669
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This ...
$7.95
In Stock
Washer Suspension Rod Support
PartSelect #: PS3502189
Manufacturer #: W10440729
These parts are the replacement suspension rod supports for your washer. They are made of plastic and are approximately 1 ½ inches in diameter. This package will come with an 8-piece set of suspension...
$9.43
In Stock
Washer Washer
PartSelect #: PS11742027
Manufacturer #: WP3949550
This part goes on the agitator retaining bolt.
$12.58
In Stock
Refrigerator Touchup Paint (White)
PartSelect #: PS385132
Manufacturer #: 72017
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
$12.58
In Stock
Washer D-Shaped Knob Insert
PartSelect #: PS11746209
Manufacturer #: WP8536939
This insert is sold individually. Knob not included. Knob is sold separately.
$10.45
In Stock
Lid Latch Strike
PartSelect #: PS11750882
Manufacturer #: WPW10240513
This part is the replacement lid latch or latch assembly for your top-load washer. The lid latch holds your washer door closed, and allows the washer to run its cycle. If the lid latch is damaged, you...
$30.95
In Stock
Washer Hose Clamp
PartSelect #: PS11740613
Manufacturer #: WP285655
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
$9.95
In Stock
Washer Lid Hinge Mounting Screw
PartSelect #: PS11748588
Manufacturer #: WPW10119828
Sold individually. NOTE: The color on the screw may not be the same as the image, but will still function the same.
$8.37
In Stock
Manuals & Care Guides for 4GWTW4740YQ1
Click to downloadInstall
Installation Instructions
(11.5MB)
Install
Installation Instructions
(7.23MB)
Install
Installation Instructions
(5.51MB)
Install
Installation Instructions
(0.81MB)
Manual
Owner's Manuals
(8.5MB)
Questions And Answers for 4GWTW4740YQ1
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jorge
November 28, 2022
Lava ,enjuaga , centrífuga y al final
No descarga toda el agua
For model number 4GWTW4740YQ1
Hola Jorge, gracias por tu consulta. Hemos investigado el número de modelo que ha proporcionado y le recomendamos que compruebe las siguientes piezas para solucionar el problema: la bomba de drenaje, la manguera de la bañera a la bomba y la manguera de drenaje. También recomendamos revisar el filtro de pelusa debajo de la tina para ver si hay obstrucciones o daños visibles. Buena suerte con su reparación y si necesita ayuda para realizar un pedido, no dude en llamar a nuestro servicio de atención al cliente, abierto los 7 días de la semana para ayudarlo. Esperamos con interés escuchar de usted.
Hello Jorge, Thank you for your inquiry. We have researched the model number you have provided and we would recommend checking the following parts to fix your issue: the drain pump, the tub to pump hose, and the drain hose. We would also recommend checking the lint filter underneath the tub for any clogs or visible damage. Good luck with your repair and if you need assistance with placing an order, please do not hesitate to call our customer service, open 7 days a week to help you. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
Related Parts:
Lint Filter
$56.56
In Stock
PUMP-WATER
$73.46
Special Order
Washer Tub to pump Hose Assembly
$25.95
In Stock
Drain Hose
$25.15
In Stock
- < Prev
- 1
- Next >
Common Symptoms of the 4GWTW4740YQ1
[Viewing 12 of 12]Leaking
Fixed by
these parts
these parts
Show All
Will not agitate
Fixed by
these parts
these parts
Show All
Shaking and Moving
Fixed by
these parts
these parts
Show All
Spinning Issues
Fixed by
these parts
these parts
Show All
Spins slowly
Fixed by
these parts
these parts
Show All
Burning smell
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Noisy and Marks Left on Clothes
Fixed by
these parts
these parts
Show All
Lid or door won’t close
Fixed by
these parts
these parts
Show All
Will not drain
Fixed by
these parts
these parts
Show All
Cycle Not Advancing
Fixed by
these parts
these parts
Show All
Locking Issues
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Violent shacking in spin mode.
-
Terry from Homosassa, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Wrench (Adjustable)
185 of 224 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noise on bottom of Washer louder as time went on. 1 1/2 years
Well, first investigated and found loose nut on drive clutch. First take off the two screws with nut drive then cover off using a screwdriver blade to snap off the cover. Then socket ratchet to take off the nut on drive clutch. take off belt by slowly rotating the drive gear. two screws that hold the electronics to the upper drive clutch
... Read more
and put aside, so you can snap off the cover for drive clutch on upper part with screwdriver and off the parts come and install whole unit back as took it apart. Line up the new upper clutch so that is position as was before. (Using parts diagram helps a lot as www. partsselect.com has for you or Maytag.com.) Then put the electronic part board back on and the gear and nut. Make sure it is tight by several attempts to make sure it's snugged up good and then slowly roll belt back on the pulley and motor drive. Put your cover guard back on with two screws and done.
Read less
Parts Used:
-
Jerry from WALLA WALLA, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers, Socket set
91 of 122 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer was off balance during spin cycle. The suspension piece broken.
-
Joseph from PERKINS, GA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
66 of 91 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!