417-270 Powermate Compressor - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
hubcap fell off my coleman air compressor
repair didn't happen the part was the wrong size so i wasted $20 and my time because the part was on back order (which the website did not show) Will never use you service again, complete waste of time and money
Parts Used:
-
Richard from AUBURN, WA
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Air leak at pressure switch diaphram
Kobalt 15g compressor.
* unscrew 6 T-20 to remove compressor housing cover.
* disconnect 2x black wire and 2x wire, and 2x green.
* use hand torch (or lighter) to soften tubing.
034-0174 is a discontinued pressure swirch. Purchased 034-0192 which fit perfectly. Only difference between 0174 and 0192 is the unloader valve. Which I did not need as its my unit is piped separately.
* unscrew 6 T-20 to remove compressor housing cover.
* disconnect 2x black wire and 2x wire, and 2x green.
* use hand torch (or lighter) to soften tubing.
034-0174 is a discontinued pressure swirch. Purchased 034-0192 which fit perfectly. Only difference between 0174 and 0192 is the unloader valve. Which I did not need as its my unit is piped separately.
Parts Used:
-
James from ANAHEIM, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!