4135 - Overview
Models starting with 4135
Click on the best match to narrow your results.
- 4135-0 Oster Blender (2 Speed Professional Blender)
- 41350119 General Electric Dishwasher
- 41353 Craftsman Chainsaw (Socket Rack)
- 41354 Craftsman Chainsaw (Socket Rack)
- 41355 Toro Chainsaw (Enclosed Boom Multi-Pro 1100)
- 41356 Toro Cultivator (Mount For Enclosed Boom Multi-Pro 1100)
- 41357 Toro Chainsaw (Enclosed Boom Multi-Pro 5500 And Workman)
- 41358 Toro Chainsaw (Enclosed Walking Boom)
- 41359 Toro Chainsaw (Enclosed Walking Boom Trailer)
Keep searches simple, eg. "belt" or "pump".
Dishwasher Silverware Basket
PartSelect #: PS261346
Manufacturer #: WD28X265
The silverware basket, used for dishwashers, is in the bottom of the dishrack. The basket is used to hold eating utensils such as spoons, forks, and knives. If the basket is worn out or broken, you sh...
$76.39
In Stock
Dishwasher Rinse Aid Fill Cap
PartSelect #: PS2351824
Manufacturer #: WD12X10284
This part helps keep the rinse aid the dispenser until its needed.
$32.95
In Stock
Dishwasher Water Inlet Valve
PartSelect #: PS259411
Manufacturer #: WD15X93
This water inlet valve is specially designed for those dishwashers that fit under the counter from 1974 To Present. The valve should be located behind the lower kickplate panel in either the right or ...
$46.95
In Stock
Third Level Spray Arm
PartSelect #: PS755622
Manufacturer #: WD28X10103
Water is forced through this spray arm by the unit's pump and motor assembly. The force of the water propels the spray arms, spraying water and detergent onto the dishes on the dishrack. This spray ar...
$52.42
Special Order
Dishwasher Hose Clamp Kit
PartSelect #: PS270806
Manufacturer #: WH1X2036
This is a water hose clamp kit for a variety of appliances including dishwashers and washers. This is a genuine replacement part. The kit includes two hose clamps. The smaller of the two is 1 inch in ...
$22.95
In Stock
Dishwasher Door Latch Knob
PartSelect #: PS264113
Manufacturer #: WD9X351
This knob is attached to the dishwasher door latch mechanism.
$19.95
In Stock
Snow Blower Lock Nut
PartSelect #: PS8953555
Manufacturer #: 3296-42
This Ni Nut-Lock, or Nylock Nut, is a Silver 1/4 x 20 metal nut. Sold individually, it can be adjusted using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secu...
$5.95
In Stock
Lawn Mower Lock Nut
PartSelect #: PS9276456
Manufacturer #: 3296-6
The Lock Nut is used to secure and lock parts in place. This is a gold, metal, individually sold part which can be installed with a wrench set, and socket set, and attaches onto various locations on a...
$3.99
In Stock
Exact Part matches for your search term
[Viewing 4 of 4]
Catcher Lid
This part number matches the current model number 4135
PartSelect #: PS11956943
Manufacturer #: 4135
No Longer Available
Air Filter
This part number matches the current model number 4135
PartSelect #: PS12630432
Manufacturer #: 4135
4 pack of Air Filter 394018S
$68.23
Special Order
Washer
This part number matches the current model number 4135
PartSelect #: PS16987576
Manufacturer #: 4135
No Longer Available
GLASS DOOR
This part number matches the current model number 4135
PartSelect #: PS17993560
Manufacturer #: 4135
No Longer Available
Common Symptoms of models starting with 4135
[Viewing 7 of 7]Will not fill with water
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Not cleaning dishes properly
Fixed by
these parts
these parts
Show All
Will not dispense detergent
Fixed by
these parts
these parts
Show All
Not drying dishes properly
Fixed by
these parts
these parts
Show All
Not draining
Fixed by
these parts
these parts
Show All
Door latch failure
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Insufficient fill water, dishes not getting clean (valve diaphram had ruptured)
1. Remove lower cover skirt.
2. Shut of water at undersink valve.
3. Unplug power cord or turn off circuit breaker.
4. Disconnect water supply line from fill valve.
5. Unplug the electrical connector from the valve.
6. Remove the 2 valve mounting bracket screws.
7. With loose valve in hand, rotate to g ... Read more ain access to allow release of outlet hose clamp for hose removal.
8. Remove brass fitting from old valve and install on new valve. Use teflon tape on the pipe threads only.
Install new valve by reversing the procedure.
2. Shut of water at undersink valve.
3. Unplug power cord or turn off circuit breaker.
4. Disconnect water supply line from fill valve.
5. Unplug the electrical connector from the valve.
6. Remove the 2 valve mounting bracket screws.
7. With loose valve in hand, rotate to g ... Read more ain access to allow release of outlet hose clamp for hose removal.
8. Remove brass fitting from old valve and install on new valve. Use teflon tape on the pipe threads only.
Install new valve by reversing the procedure.
Read less
Parts Used:
-
Don from Mount Vernon, IL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers, Wrench set
71 of 77 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Basket was lost
Opened package from Parts Select.
Removed Silverware basket from package.
Opened Dishwasher.
Inserted Silverware Basket in rack.
Closed Dishwasher.
Discarded shipping package.
Told wife I fixed Dishwasher.
Sat down & had a beer.
Removed Silverware basket from package.
Opened Dishwasher.
Inserted Silverware Basket in rack.
Closed Dishwasher.
Discarded shipping package.
Told wife I fixed Dishwasher.
Sat down & had a beer.
Parts Used:
-
Joseph from Elmendorf, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
49 of 52 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lost Despenser Lid, Droped It And Havent Seen It Since.
Ordered the part, by using the diagram on the ge website identified the part and ordered it right them and when it came (delivered really fast) took it out of the bag and screwed it in the jet dry despenser and is working great.
Parts Used:
-
ANNE from SWANNANOA, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
26 of 31 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!