Back
Back
Keep typing for more specific results...

3709 - Overview

Models starting with 3709

Keep searches simple, eg. "belt" or "pump".
Carbon Brush Set – Part Number: CB408
Carbon Brush Set
PartSelect #: PS10156657
Manufacturer #: CB408
$10.85
  In Stock
Countersunk Screw M4X10 – Part Number: 912112-6
Countersunk Screw M4X10
PartSelect #: PS10155623
Manufacturer #: 912112-6
$4.99
  In Stock
Brush Cap – Part Number: 643550-8
Brush Cap
PartSelect #: PS10153341
Manufacturer #: 643550-8
$5.95
  In Stock
Base – Part Number: 419138-4
Base
PartSelect #: PS10150801
Manufacturer #: 419138-4
$9.98
  In Stock
Base Protector – Part Number: 410585-2
Base Protector
PartSelect #: PS10149645
Manufacturer #: 410585-2
$6.05
  In Stock
Base – Part Number: 411113-6A
Base
PartSelect #: PS10149692
Manufacturer #: 411113-6A
$27.14
  In Stock
Countersunk Head Screw M4X14 – Part Number: 251295-0
Countersunk Head Screw M4X14
PartSelect #: PS10144030
Manufacturer #: 251295-0
$3.99
  In Stock
Spur Gear – Part Number: 226217-9
Spur Gear
PartSelect #: PS10142563
Manufacturer #: 226217-9
$5.95
  In Stock
Thumb Nut – Part Number: 252652-5
Thumb Nut
PartSelect #: PS10144244
Manufacturer #: 252652-5
$5.95
  In Stock
Wrench 10 – Part Number: 781036-5
Wrench 10
PartSelect #: PS10154190
Manufacturer #: 781036-5
$6.44
  In Stock
Thumb Screw M5X33 – Part Number: 265771-8
Thumb Screw M5X33
PartSelect #: PS10145256
Manufacturer #: 265771-8
$3.99
  In Stock
Screw M6X25 – Part Number: 265763-7
Screw M6X25
PartSelect #: PS10145254
Manufacturer #: 265763-7
$3.99
  In Stock

Exact Part matches for your search term

[Viewing 3 of 3]
SUB 6859-6 – Part Number: 3709
SUB 6859-6
This part number matches the current model number 3709
PartSelect #: PS1369257
Manufacturer #: 3709
  No Longer Available
Gear, Spur, 14T – Part Number: 3709
Gear, Spur, 14T
This part number matches the current model number 3709
PartSelect #: PS8956566
Manufacturer #: 3709
  No Longer Available
BURNER 50 MM – Part Number: 3709
BURNER 50 MM
This part number matches the current model number 3709
PartSelect #: PS17992370
Manufacturer #: 3709
  No Longer Available
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Old power cord frayed at the grommet entering the drill casing
Did not do repair as replacement part did not match description on partselect website. The grommet is not part of the replacement that was sent. Order #22962198
Email sent (11/16/2023) to partselect.com has gone unanswered
Thanks?
Parts Used:
Drill Power Cord (8-Foot)
  • Bruce from HILLSBORO, OR
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    30 - 60 mins
3 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rear flap had deteriorated.
Grip each retaining clip next to the housing with large pliers. Squeeze clip completely and pull straight out. Important: Do not attempt to bend clip up or down as clip may bend and become very difficult to remove. When old flap is removed, mower edge can be cleaned and painted to avoid rust. Install new flap in same direction front/rear as removed flap. Reinstall clips in same direction as they were, as up and down sides are not the same.
Parts Used:
Rear Flap (22&#34)
  • David from PITTSBURGH, PA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!