36314152000 Kenmore Dishwasher - Overview
Sections of the 36314152000
[Viewing 3 of 3]Keep searches simple, eg. "belt" or "pump".

Dishwasher Door Gasket (White)
PartSelect #: PS958908
Manufacturer #: WD08X10057
This one piece dishwasher door gasket provides a water tight seal to keep water from leaking out of your dishwasher.
$75.41
In Stock

Dishwasher Water Inlet Valve
PartSelect #: PS259368
Manufacturer #: WD15X10003
This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of wat...
$47.95
In Stock

Dishwasher Rinse Aid Fill Cap
PartSelect #: PS2351824
Manufacturer #: WD12X10284
This part helps keep the rinse aid the dispenser until its needed.
$32.95
In Stock

Dishwasher Hinge Arm Link
PartSelect #: PS259336
Manufacturer #: WD14X10009
The hinge link on your dishwasher connects the spring to the dishwasher door hinge. If the hinge link becomes cracked or damaged, you may not be able to shut or lock your dishwasher door properly. In ...
$13.95
In Stock

Dishwasher Drain Solenoid Kit
PartSelect #: PS260117
Manufacturer #: WD21X10060
This kit includes the armature and linkage assembly.
$59.12
In Stock

Drain Solenoid and Bracket Assembly
PartSelect #: PS1481923
Manufacturer #: WD21X10268
This valve opens in order for the water to drain out of the dishwasher.
$45.95
In Stock

Dishwasher Motor And Pump Kit
PartSelect #: PS260801
Manufacturer #: WD26X10013
This is a pump and motor kit for your dishwasher. This assembly replaces many old-style pump and motor kits that were manufactured since 1970. The instructions are included with this kit in to assist ...
$183.95
In Stock

Impeller and Seal Kit
PartSelect #: PS259598
Manufacturer #: WD19X10032
The impeller and seal kit is used in a dishwasher. The kit includes all the parts needed to do this repair, including the impeller, seal, blade, filter, skidder and skidder holder. If your washer is l...
No Longer Available

Dishwasher Detergent Cup Release Arm
PartSelect #: PS1765980
Manufacturer #: WD16X10011
This is the replacement detergent cup release arm for your dishwasher. It is made of black plastic and is sold individually. The detergent cup release arm is found on the inside of the dishwasher door...
$26.95
In Stock

Dishwasher Door Latch Kit
PartSelect #: PS259293
Manufacturer #: WD13X10003
This door latch kit is used for dishwashers.
$44.95
In Stock

Drain Hose
PartSelect #: PS260686
Manufacturer #: WD24X10014
This drain hose is an OEM, manufacturer-approved replacement part for your dishwasher. The drain hose filters out the wastewater from the dishwasher. If there is a hole in it, water will leak out of y...
$44.95
In Stock

Finished Access Panel
PartSelect #: PS1481947
Manufacturer #: WD27X10225
Discover the value of the GE Finished Access Panel. This essential component is specifically designed to cover and shield the wiring and components at the bottom front of your dishwasher. Crafted with...
$46.95
In Stock
Manuals & Care Guides for 36314152000
Click to downloadQuestions And Answers for 36314152000
Ask our experts a question about this model and we'll get back to you as soon as possible!
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
JENNIFER
October 7, 2022
what year is this dishwasher, please
For model number 36314152000
Hello Jennifer, thank you for your question. We would need the serial number to locate the year. A good rule of thumb is: The first number of the serial number represents the year it was manufactured. The second and third numbers represent the week the appliance was manufactured. Thank you for your great question.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Common Symptoms of the 36314152000
[Viewing 10 of 10]Leaking
Fixed by
these parts
these parts



Show All
Not draining
Fixed by
these parts
these parts



Show All
Will not fill with water
Fixed by
these parts
these parts



Show All
Door latch failure
Fixed by
these parts
these parts



Show All
Will not dispense detergent
Fixed by
these parts
these parts



Show All
Not cleaning dishes properly
Fixed by
these parts
these parts



Show All
Will Not Start
Fixed by
these parts
these parts


Show All
Door won’t close
Fixed by
these parts
these parts


Show All
Noisy
Fixed by
these parts
these parts

Show All
Not drying dishes properly
Fixed by
these parts
these parts

Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dish washer is not running through cycles
First and formost before you buy read everything in trouble shooting your dishwasher. Then you do not buy parts you do not need. First you turn off power, then water. Remove two screws, a rubber hose and a hard line by unscrewing if you are lucky some contractors might sweat this on. No biggie just two extra steps that's all. do in reve
... Read more
rse to assemble...
Read less
Parts Used:
-
mike from huntley, IL
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers, Wrench (Adjustable), Wrench set
93 of 107 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
D/W would not drain. Water standing in bottom.
It is a simple process to replace the drain solenoid on these dishwashers, having replaced several in the past few months.
After removing the front bottom panels, I removed the 2 screws holding the old solenoid, unplugged the wire harness, and then switched over the springs to the new solenoid. Assembly was installing 2 scre ... Read more ws, and plugging in the wire harness.
I work on a 260 + unit property, as well as working for a property management company who rents single family homes.
PartSelect.com is an excellent source of parts, shipping in a quick manner, allowing the repairs to be completed in a timely manner. Thank you.
After removing the front bottom panels, I removed the 2 screws holding the old solenoid, unplugged the wire harness, and then switched over the springs to the new solenoid. Assembly was installing 2 scre ... Read more ws, and plugging in the wire harness.
I work on a 260 + unit property, as well as working for a property management company who rents single family homes.
PartSelect.com is an excellent source of parts, shipping in a quick manner, allowing the repairs to be completed in a timely manner. Thank you.
Read less
Parts Used:
-
Ed from Cornelius, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
65 of 71 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Motor was getting noisier every time we used the dishwasher. We knew it was just a matter of time before it totally quit.
The most difficult part was removing the dishwasher from below the counter. Once that was complete, I simply turned the washer onto it's front surface to access the pump easier. Simply disconnected the electrical connectors, loosened the three hose clamps holding the hoses to the pump. Lastly removed a stiff arm bracket holding the pum
... Read more
p. Reversed the order to install the new one using a longer bracket provided with the new unit. Hooked up the electrical connections last and slid the washer back in place. The washer runs like new now and is not making noise. The replacement part was a perfect match.
Read less
Parts Used:
-
Glenn from Clemmons, NC
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers
48 of 53 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!