36275889890 Kenmore Range - Overview
Sections of the 36275889890
[Viewing 4 of 4]
Keep searches simple, eg. "belt" or "pump".
Light Bulb (40W)
PartSelect #: PS217532
Manufacturer #: 40A15
This 40-Watt light bulb is sold individually and is a genuine OEM replacement option for your home appliances. It is specially designed to withstand extreme temperatures, so this bulb is compatible wi...
$19.10
In Stock
Range Top Electrode Mounting Clip
PartSelect #: PS3510420
Manufacturer #: WB01K10112
This Genuine OEM GE Electrode Clip is a precision-engineered component designed for use across a wide range of gas ranges. Constructed from durable metal, the clip plays a critical role in securing th...
$16.95
In Stock
Range Burner Cap Medium
PartSelect #: PS241260
Manufacturer #: WB29K10001
This burner cap sits on top of the burner base.
$63.31
In Stock
Cooktop Mounting Screw
PartSelect #: PS221937
Manufacturer #: WB01K10008
This is a replacement cooktop mounting screw, used to secure the burner. If you are missing that screw on your range, this is the part to replace it. This screw is about a half an inch in length and i...
$13.95
In Stock
Burner Tube - Left Front
PartSelect #: PS240685
Manufacturer #: WB28K10025
Highlight the efficiency of your kitchen range with this genuine GE Burner Tube. A critical component placed on the left front, this burner tube ensures the smooth passage of gas to the surface burner...
$48.95
In Stock
Burner Tube - Right Front
PartSelect #: PS240684
Manufacturer #: WB28K10024
Presenting the right front burner tube, a vital component to keep your GE ranges functioning optimally. This authentic part ensures your surface burner gets an adequate and consistent supply of gas, c...
$48.95
In Stock
Burner Cap - Large
PartSelect #: PS241265
Manufacturer #: WB29K10006
Enhance your kitchen appliance with this Large Burner Cap, a high-quality product from GE. Expertly designed, it sits on top of the burner head, acting as a protective shield from spills while evenly ...
$97.95
In Stock
Natural Gas Orifice - Medium
PartSelect #: PS240682
Manufacturer #: WB28K10022
This orifice spud changes the burner from liquid propane (LP) to natural gas. This orifice is sold individually. Size: 1.50MM
$15.95
In Stock
Range Liquid Propane Orifice Spud
PartSelect #: PS240683
Manufacturer #: WB28K10023
This orifice spud changes the burner from natural gas to liquid propane. This orifice is sold individually. Size: .89MM
$19.95
In Stock
Orifice Spud - LP - Right Rear
PartSelect #: PS240691
Manufacturer #: WB28K10031
This orifice spud changes the burner from natural gas, to liquid propane. This orifice is sold individually. Size: .63mm
$35.95
In Stock
Switch
PartSelect #: PS1765837
Manufacturer #: WB24T10147
This light switch is controlled by opening and closing the oven door
$25.95
In Stock
Questions And Answers for 36275889890
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the 36275889890
[Viewing 5 of 5]Will Not Start
Fixed by
these parts
these parts
Show All
Gas smell
Fixed by
these parts
these parts
Show All
Element will not heat
Fixed by
these parts
these parts
Show All
Little to no heat when baking
Fixed by
these parts
these parts
Show All
Gas igniter glows, but will not light
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Convection oven fan and door light not working
The first step was to determine whether the problem was with the fan itself or the switch. I did this by opening the back cover and using a Volt meter to verify that the fan was not getting power. (I could have skipped this step.)
Next, I unplugged the range, closed up the back cover and lifted the range hood by removing two he ... Read more x head screws that are just inside and on either side of the top of the opening in the range door. Propping the hood open, I removed the connector leading to the switch, then pushed the switch out the front. Inspection showed that the switch was damaged so I closed up the range and ordered the part from Part Select. Once the part arrived, it was a 15 minute job to unplug the range, lift the top, install the new switch, and close up the unit.
Caution. On starting to install the switch, I failed to unplug the range and my finger brushed one of the hot contacts leading to the switch. Thankfully, I was not injured. Do not repeat my mistake on this issue. Unplug the range even if you're only installing this simple switch.
Next, I unplugged the range, closed up the back cover and lifted the range hood by removing two he ... Read more x head screws that are just inside and on either side of the top of the opening in the range door. Propping the hood open, I removed the connector leading to the switch, then pushed the switch out the front. Inspection showed that the switch was damaged so I closed up the range and ordered the part from Part Select. Once the part arrived, it was a 15 minute job to unplug the range, lift the top, install the new switch, and close up the unit.
Caution. On starting to install the switch, I failed to unplug the range and my finger brushed one of the hot contacts leading to the switch. Thankfully, I was not injured. Do not repeat my mistake on this issue. Unplug the range even if you're only installing this simple switch.
Read less
Parts Used:
-
Michael from Albuquerque, NM
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver
17 of 21 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Damaged both front burner tubes.
While i was inserting the new lp,gas orriface to the right rear burner tube I dropped the oriface.Without looking i popped the top of the burner unit, like most older type stoves, and thats when i ran into my problem. I realized the burner tube assemblies are attached by 3 screws to the top cover.Not attached to the cabinet as the older m
... Read more
odels, Basically cracked both front aluminum tubes trying to retrieve the dropped oriface. so i had to replace the burner tube units, which involved removing 3 screws, and loosing up and removal of the nut to the main gas tube. extremely easy repair, next time i`ll try to remember look before i leap,total time to (r+r)burner tubes about 20 minutes.Parts select pulled me out of the fire on this one, great staff and service, with quick delivery.
Read less
Parts Used:
-
william from Tampa, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Wrench set
15 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Range Top Burners would not ignite
Here's how I fixed my problem.
I took the aluminum cover, the part that sits over the jet & the igniter, which simply comes off. It's the part that the igniter discharges to. I took this cover off & using a pencil I scratched the lead of the pencil into the area
which is around the igniter. I made sure to cover the area wit ... Read more h as much lead as I could get on it. You need to make sure that you do this to all four burners. The only care you need to take, is not to block the gas jet which is in the igniter recess. It's been about 3 weeks since I added this & the burners click loudly & have lit without a problem. It appears that the aluminum may develop a coating on it of some kind which is highly resistive.
I took the aluminum cover, the part that sits over the jet & the igniter, which simply comes off. It's the part that the igniter discharges to. I took this cover off & using a pencil I scratched the lead of the pencil into the area
which is around the igniter. I made sure to cover the area wit ... Read more h as much lead as I could get on it. You need to make sure that you do this to all four burners. The only care you need to take, is not to block the gas jet which is in the igniter recess. It's been about 3 weeks since I added this & the burners click loudly & have lit without a problem. It appears that the aluminum may develop a coating on it of some kind which is highly resistive.
Read less
Parts Used:
-
Kevin from Monroe, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers
17 of 24 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!