22101 - Overview
Models starting with 22101
Click on the best match to narrow your results.
- 22101 (1988) Kenmore Range (Kenmore Range/Stove/Oven Model 22101 (1988) (22101(1988)) Parts)
- 221010X31A (2005) Briggs and Stratton Lawn Mower (221010x31a - Walk-Behind Mower (2005))
- 221010x31A Murray Lawn Mower (22" Lawn Mower)
- 221010x99A Murray Lawn Mower (22" Lawn Mower)
- 221010X99A (2004) Briggs and Stratton Lawn Mower (221010x99a - Walk-Behind Mower (2004))
- 221010X99B (2005) Briggs and Stratton Lawn Mower (221010x99b - Walk-Behind Mower (2005))
- 221010x99B Murray Lawn Mower (22" Lawn Mower)
- 2210140010M Snapper Tiller (Snapper Tiller Model 2210140010M Parts)
- 2210140025M Snapper Tiller (Snapper Tiller Model 2210140025M Parts)
Keep searches simple, eg. "belt" or "pump".
Range Trim Ring 8
PartSelect #: PS244479
Manufacturer #: WB31X5014
This 8 inch high rise burner trim ring is intended for use with detached style low rise tilt lock surface mount burners on ranges.
$15.95
In Stock
Range Surface Element 8 2350w
PartSelect #: PS243868
Manufacturer #: WB30M2
The surface element, also known as the coil surface element, transfers heat to the area on top of range. The element is 8 inches in diameter. If your surface element does not heat, over heats, or heat...
$55.39
In Stock
Range Surface Element
PartSelect #: PS243867
Manufacturer #: WB30M1
If you notice that your surface element will not heat properly, you may need to replace it. This surface element is 6 inches in diameter and 240V. It is a Y-frame surface burner element with five turn...
$48.95
In Stock
Range Infinite Heat Switch Kit
PartSelect #: PS16216966
Manufacturer #: WB21X36771
The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.
$50.44
In Stock
Range Terminal Block
PartSelect #: PS232646
Manufacturer #: WB17X5113
This kit includes one ceramic block with 6" wire leads, 2 wire nuts and 2 heat shrink with mounting bracket.
$35.95
In Stock
Range Drip Bowl 6
PartSelect #: PS244466
Manufacturer #: WB31X5010
This six inch chrome drip bowl is intended for use with looped terminal style surface mount burner element units.
$12.95
In Stock
Range Drip Bowl 8
PartSelect #: PS244470
Manufacturer #: WB31X5011
Sold individually.
$26.95
In Stock
Lawn Mower Wing Knob
PartSelect #: PS9999469
Manufacturer #: 703065
This 5/16-18 wing knob is sold individually. It is a plastic part, black in color, that works on a variety of equipment. Its general function is to allow you to quickly loosen, remove, or fold down th...
$7.62
In Stock
Lawn Mower Flange Locknut
PartSelect #: PS10000167
Manufacturer #: 703893
This centerlock nut, or lock nut, is sold individually and locks itself in place when inserted, to prevent it from backing out due to vibration. Over time, due to its strenueous job, it may become loo...
$7.22
In Stock
V-Belt
PartSelect #: PS9998825
Manufacturer #: 7014353YP
The V-belt is an essential part for driving your tiller. This is an OEM V-belt, 0.5x62 inches in dimension, and black in color. Made of rubber, the V-belt can crack, fray, and wear over time and due t...
No Longer Available
Exact Part matches for your search term
[Viewing 2 of 2]
18" Axle
This part number matches the current model number 22101
PartSelect #: PS12041965
Manufacturer #: 22101
No Longer Available
Jacket
This part number matches the current model number 22101
PartSelect #: PS12276582
Manufacturer #: 22101
No Longer Available
Common Symptoms of models starting with 22101
[Viewing 2 of 2]Element will not heat
Fixed by
these parts
these parts
Show All
Little to no heat when broiling
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Replacement of Coils
Removed by slightly wiggling out of the coupling. No tools needed, seriously, (and I'm a contractor). Basically, pull out and snap back in.
Parts Used:
-
Joseph from South Plainfield, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
35 of 42 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Heating element required continuous adjustments to work.
I removed old 8" surface element and terminal block. Some of old wiring had to be cut off because of harding/cracking of old wiring. Stove was 23 years old and this burner was the most frequently used one. I soldered the new and remaining old wires together. I used the shirnk wrap that came with the terminal block to cover the solder join
... Read more
t. I screwed the new terminal block (one screw holds it in place - used same screw from old terminal block that was removed). I finished by inserting the new surface element. Everything works fine. In the next week or two after we use it a while, I will check wiring again to make sure there are no changes. You need to be very careful as it gets very hot under the burner.
Read less
Parts Used:
-
Richard from Apex, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
29 of 32 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Large burner would operate on high setting only.
1. Removed the back panel.
2. Disconnected the wires from the old switch while connecting wires to the new switch one at a time.
3. Installed the new switch and broke off the excess metal on the post which fits into the burner knob on front of the range.
4. Replaced the burner knob and replaced the back panel.
2. Disconnected the wires from the old switch while connecting wires to the new switch one at a time.
3. Installed the new switch and broke off the excess metal on the post which fits into the burner knob on front of the range.
4. Replaced the burner knob and replaced the back panel.
Parts Used:
-
Ernest from Bellevue, NE
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Socket set
22 of 28 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!