21680 - Overview
Models starting with 21680
Click on the best match to narrow your results.
- 21680 (400000000-999999999) Toro Lawn Mower (48cm Super Recycler)
- 21680 (400000000-405099999) Toro Lawn Mower (21680, 48cm Super Recycler, (Sn 400000000-405099999))
- 21680 (405100000-999999999) Toro Lawn Mower (21680, 48cm Super Recycler, (Sn 405100000-999999999))
- 216802-0108-E1 Briggs and Stratton Engine (Engine)
- 21680B Bostitch Nailer (Industrial Fine Wire Stapler)
- 21680B-ALM Bostitch Nailer (Industrial Fine Wire Stapler)
- 21680B-LN Bostitch Nailer (Industrial Fine Wire Stapler)
Keep searches simple, eg. "belt" or "pump".
Exact Part matches for your search term
[Viewing 1 of 1]
Ball Bearing Worm
This part number matches the current model number 21680
PartSelect #: PS18275942
Manufacturer #: 21680
This is an authentic Abu Garcia replacement part sourced from the original manufacturer for use with baitcasting reels. The special ball bearing is commonly used to reduce friction between a rotating ...
No Longer Available
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Screw can out of the carburator throttle baffel and stuck in the exhaust valve
No compression. Removed the cylinder head. freed the screw, checked the valve to see if it still sealed. Turned the head over with the valves in it, install a spark plug, fill the head dome with gas and see if any leeks out over a 2 hr period. If not you are good to go. Reinstalled every thing with new gaskets and a new carburetor screw.
... Read more
Set the valves to spec. Complete the rebuild and there you have it. Rebuild the carburetor while you have it apart. This motor runs great !!!
Read less
Parts Used:
-
FRANK from EASTANOLLEE, GA
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers, Socket set, Wrench set
9 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Stopped running. Turned to be a bent intake push rod and broken rocker arm
Removed head. Replaced both rocker arms, intake pus rod, push rod guide exhaust and head gaskets. Torqued head in 3 stages to 216 in/lbs. gapped intake to .004 and exhaust to .006 at TDC
Added oil and gas. Now running great
If you need to replace push rods use steel (exhaust) they are the same length
The engine ... Read more was a Briggs & Stratton 217802 0113 E10604 (2006 year date code)
I used the following
796189 gasket
272475S gasket
697494 push rod
690822 push rod guide
691751 rocker arms
Added oil and gas. Now running great
If you need to replace push rods use steel (exhaust) they are the same length
The engine ... Read more was a Briggs & Stratton 217802 0113 E10604 (2006 year date code)
I used the following
796189 gasket
272475S gasket
697494 push rod
690822 push rod guide
691751 rocker arms
Read less
Parts Used:
-
Rene from COVINGTON, LA
-
Difficulty Level:Really Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Socket set, Wrench set
6 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gas leaking from tube breather
First I opened the top of the mower to expose the housing cover. Secondly I removed the four housing bolts to remove the housing cover from the mower. Next I removed the tube breather and installed the new tube breather and replaced the housing cover with the four bolts previously removed and closed the top of the mower. I filled the mow
... Read more
er with gas to check for leaks which weren't any leaks. I proceeded to mow the lawn with ease.
Read less
Parts Used:
-
Emanuel from FERRIDAY, LA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Socket set
7 of 22 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!