21467 Toro Lawn Mower - Overview
Models starting with 21467
Click on the best match to narrow your results.
- 21467 (400000000-407829999) Toro Lawn Mower (21467, 22in Recycler Lawn Mower, (Sn 400000000-407829999))
- 21467 (407830000-999999999) Toro Lawn Mower (21467, 22in Recycler Lawn Mower, (Sn 407830000-999999999))
- 21467 (400000000 - 999999999) Toro Lawn Mower (Flex-Force Power System 60v Max 22in Recycler Lawn Mower)
Keep searches simple, eg. "belt" or "pump".
Lawn Mower Mulching Blade (22-In)
PartSelect #: PS11804777
Manufacturer #: 131-4547-03
This is a genuine OEM replacement blade for use on Lawn Mowers. If the blade is too dull it will tear the grass instead of an even cut. A bent or damaged blade can cause serious damage or injuries. Yo...
$20.80
In Stock
Retaining Ring
PartSelect #: PS8950132
Manufacturer #: 32151-61
For all your repair needs, look no further than this Genuine Toro Ring-Retaining. Perfect for various appliance repair tasks, this Toro OEM part epitomizes robustness and durability. Crafted to the hi...
$5.95
In Stock
Snow Blower Nylon Insert Lock Nut
PartSelect #: PS9276436
Manufacturer #: 3296-29
The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is use...
$5.95
In Stock
Lawn Mower Blade Support
PartSelect #: PS9257416
Manufacturer #: 108-3766-03
The Blade Support is a 6-x-3-inch Black, metal part used to support the blade. It's rated as "Easy" to install by customers. It must be torqued to manufacturer specifications which will require a sock...
$11.52
In Stock
Exact Part matches for your search term
[Viewing 4 of 4]
STUD
This part number matches the current model number 21467
PartSelect #: PS8918101
Manufacturer #: 21467
No Longer Available
DISCONTINUED
This part number matches the current model number 21467
PartSelect #: PS9353129
Manufacturer #: 21467
No Longer Available
HANDLE
This part number matches the current model number 21467
PartSelect #: PS16564006
Manufacturer #: 21467
$22.48
Special Order
Latch spacer
This part number matches the current model number 21467
PartSelect #: PS16983115
Manufacturer #: 21467
No Longer Available
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Wheel height adjuster lever (spring steel) cracked / split in two.
Tip mower onto side, raising side to be repaired. Empty gas tank if possible or use rags to prevent gasoline drips onto clean surfaces.
Remove wheel using a 1/2" socket.
Remove wheel height assembly with 1/2" socket and open end wrench to hold nut below the deck.
Position new spring arm over the slot on wheel height ... Read more assembly plate. Check opposite side to verify correct orientation if needed.
Remove plastic cover from old lever using a small flat blade screwdriver. Slip onto new lever.
Replace wheel height assembly.
Replace wheel.
Remove wheel using a 1/2" socket.
Remove wheel height assembly with 1/2" socket and open end wrench to hold nut below the deck.
Position new spring arm over the slot on wheel height ... Read more assembly plate. Check opposite side to verify correct orientation if needed.
Remove plastic cover from old lever using a small flat blade screwdriver. Slip onto new lever.
Replace wheel height assembly.
Replace wheel.
Read less
Parts Used:
-
Ray from YARDLEY, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set, Wrench set
3 of 21 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!