20373 (315000001-315999999) Toro Lawn Mower - Overview
Sections of the 20373
[Viewing 10 of 10]-
Brake Control Assembly
-
Carburetor, Muffler, Air Cleaner and Valve Cover Assembly Engine Assembly No. 120-4412
-
Deck, Side Chute and Rear Door Assembly
-
Dipstick and Gasket Assembly Engine Assembly No. 120-4412
-
Engine and Blade Assembly
-
Front Wheel and Height-Of-Cut Assembly
-
Handle Assembly
-
Rear Bag Assembly
-
Shroud, Flywheel and Fuel Tank Assembly Engine Assembly No. 120-4412
-
Transmission and Rear Wheel Drive Assembly
Keep searches simple, eg. "belt" or "pump".
Lawn Mower Stepped Washer
PartSelect #: PS9048394
Manufacturer #: 614426
The Stepped Washer is used to secure the wheels onto the shaft of a push mower. It attaches to the wheel axle. If broken due to wear/fatigue, the wheel will come off and the part should be replaced. I...
$3.99
In Stock
Lawn Mower Shoulder Bolt
PartSelect #: PS9046634
Manufacturer #: 614650
The Shoulder Bolt is a 3/8-16 x 3-5/8 bolt, certified by the original equipment manufacturer. It is a metal bolt which is individually sold and comes in black. Installation requires a wrench or socket...
$4.99
In Stock
Snow Blower Nylon Insert Lock Nut
PartSelect #: PS9276436
Manufacturer #: 3296-29
The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is use...
$5.95
In Stock
Lawn Mower Drive Belt
PartSelect #: PS8844898
Manufacturer #: 115-4669
Wheel drive belt. Width: 3/8 inch Length: 33 1/4 inch
$15.92
$16.35
Special Order
Lawn Mower Traction Cable
PartSelect #: PS8848740
Manufacturer #: 115-8435
This authentic replacement traction cable is supplied directly from original equipment manufacturer for use on Toro lawn mowers. The traction cable engages drive wheels on the lawn mowers. It is conne...
$37.00
In Stock
Lawn Mower Washer
PartSelect #: PS8963619
Manufacturer #: 40-1940
This OEM-sourced washer in your walk-behind lawnmower provides space and protects the rear wheel from rubbing against the pivot arm assembly, ensuring smooth wheel rotation. A damaged washer may appea...
$3.99
In Stock
Lawn Mower Blade Support
PartSelect #: PS9257416
Manufacturer #: 108-3766-03
The Blade Support is a 6-x-3-inch Black, metal part used to support the blade. It's rated as "Easy" to install by customers. It must be torqued to manufacturer specifications which will require a sock...
$11.52
In Stock
Exact Part matches for your search term
[Viewing 4 of 4]
LINK-IDLER ARM LT
This part number matches the current model number 20373
PartSelect #: PS9451636
Manufacturer #: 20373
No Longer Available
Exhaust Tube
This part number matches the current model number 20373
PartSelect #: PS10094306
Manufacturer #: 20373
$80.59
Special Order
Pc Board
This part number matches the current model number 20373
PartSelect #: PS12750857
Manufacturer #: 20373
No Longer Available
Bearing
This part number matches the current model number 20373
PartSelect #: PS16982778
Manufacturer #: 20373
No Longer Available
Questions And Answers for 20373
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Wheel height adjuster lever (spring steel) cracked / split in two.
Tip mower onto side, raising side to be repaired. Empty gas tank if possible or use rags to prevent gasoline drips onto clean surfaces.
Remove wheel using a 1/2" socket.
Remove wheel height assembly with 1/2" socket and open end wrench to hold nut below the deck.
Position new spring arm over the slot on wheel height ... Read more assembly plate. Check opposite side to verify correct orientation if needed.
Remove plastic cover from old lever using a small flat blade screwdriver. Slip onto new lever.
Replace wheel height assembly.
Replace wheel.
Remove wheel using a 1/2" socket.
Remove wheel height assembly with 1/2" socket and open end wrench to hold nut below the deck.
Position new spring arm over the slot on wheel height ... Read more assembly plate. Check opposite side to verify correct orientation if needed.
Remove plastic cover from old lever using a small flat blade screwdriver. Slip onto new lever.
Replace wheel height assembly.
Replace wheel.
Read less
Parts Used:
-
Ray from YARDLEY, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set, Wrench set
3 of 21 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!