20363 Toro Lawn Mower - Overview
Models starting with 20363
Click on the best match to narrow your results.
- 20363 (400000000-405599999) Toro Lawn Mower (20363, Flex-Force Power System 60v Max 22in Recycler Lawn Mower, (Sn 400000000-405599999))
- 20363 (405600000-999999999) Toro Lawn Mower (20363, Flex-Force Power System 60v Max 22in Recycler Lawn Mower, (Sn 405600000-999999999))
- 20363 (400000000-999999999) Toro Lawn Mower (Flex-Force Power System 60v Max 22in Recycler Lawn Mower)
- 20363T (400000000-999999999) Toro Lawn Mower (Flex-Force Power System 60v Max 22in Recycler Lawn Mower)
- 20363T (400000000-405599999) Toro Lawn Mower (20363t, Flex-Force Power System 60v Max 22in Recycler Lawn Mower, (Sn 400000000-405599999))
- 20363T (405600000-999999999) Toro Lawn Mower (20363t, Flex-Force Power System 60v Max 22in Recycler Lawn Mower, (Sn 405600000-999999999))
Keep searches simple, eg. "belt" or "pump".
Lawn Mower Stepped Washer
PartSelect #: PS9048394
Manufacturer #: 614426
The Stepped Washer is used to secure the wheels onto the shaft of a push mower. It attaches to the wheel axle. If broken due to wear/fatigue, the wheel will come off and the part should be replaced. I...
$3.99
In Stock
Lawn Mower Shoulder Bolt
PartSelect #: PS9046634
Manufacturer #: 614650
The Shoulder Bolt is a 3/8-16 x 3-5/8 bolt, certified by the original equipment manufacturer. It is a metal bolt which is individually sold and comes in black. Installation requires a wrench or socket...
$4.99
In Stock
Retaining Ring
PartSelect #: PS8950132
Manufacturer #: 32151-61
For all your repair needs, look no further than this Genuine Toro Ring-Retaining. Perfect for various appliance repair tasks, this Toro OEM part epitomizes robustness and durability. Crafted to the hi...
$5.95
In Stock
Snow Blower Nylon Insert Lock Nut
PartSelect #: PS9276436
Manufacturer #: 3296-29
The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is use...
$5.95
In Stock
Exact Part matches for your search term
[Viewing 1 of 1]
Handle Grip (2)
This part number matches the current model number 20363
PartSelect #: PS10094304
Manufacturer #: 20363
$15.32
Special Order
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Wheel height adjuster lever (spring steel) cracked / split in two.
Tip mower onto side, raising side to be repaired. Empty gas tank if possible or use rags to prevent gasoline drips onto clean surfaces.
Remove wheel using a 1/2" socket.
Remove wheel height assembly with 1/2" socket and open end wrench to hold nut below the deck.
Position new spring arm over the slot on wheel height ... Read more assembly plate. Check opposite side to verify correct orientation if needed.
Remove plastic cover from old lever using a small flat blade screwdriver. Slip onto new lever.
Replace wheel height assembly.
Replace wheel.
Remove wheel using a 1/2" socket.
Remove wheel height assembly with 1/2" socket and open end wrench to hold nut below the deck.
Position new spring arm over the slot on wheel height ... Read more assembly plate. Check opposite side to verify correct orientation if needed.
Remove plastic cover from old lever using a small flat blade screwdriver. Slip onto new lever.
Replace wheel height assembly.
Replace wheel.
Read less
Parts Used:
-
Ray from YARDLEY, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set, Wrench set
4 of 22 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!