EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
Back
Back
Keep typing for more specific results...

1A - Overview

Models starting with 1A

Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Air Conditioner Cover Screw – Part Number: WP308685
Air Conditioner Cover Screw
PartSelect #: PS11740701
Manufacturer #: WP308685
Sold individually.
$7.95
  In Stock
Order now and your part arrives in 2-3 business days!
Refrigerator Screw – Part Number: WP488729
Refrigerator Screw
★★★★★
★★★★★
(1)
PartSelect #: PS11742721
Manufacturer #: WP488729
Metallic screw that is less than an inch long. Does not include the plastic washer.
$8.37
  In Stock
Order now and your part arrives in 2-3 business days!
Washer Water Inlet Hose Washer – Part Number: WP16123
Washer Water Inlet Hose Washer
★★★★★
★★★★★
(2)
PartSelect #: PS11738697
Manufacturer #: WP16123
If your clothes washer is leaking, it is likely that there could be an issue with one of the hoses. If the hoses are in working order, you should check the washers connecting the hose to your unit. Ru...
$7.95
  In Stock
Order now and your part arrives in 2-3 business days!
Range Hex Nut – Part Number: WP488130
Range Hex Nut
★★★★★
★★★★★
(2)
PartSelect #: PS11742711
Manufacturer #: WP488130
This hex nut is an authentic Whirlpool part that is sourced directly from the original equipment manufacturer, and will fit a variety of appliances including ovens, microwaves, refrigerators, air cond...
$8.95
  In Stock
Order now and your part arrives in 2-3 business days!
Refrigerator Single Hex Head Screw – Part Number: WP489069
Refrigerator Single Hex Head Screw
PartSelect #: PS11742731
Manufacturer #: WP489069
Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".
$7.95
  In Stock
Order now and your part arrives in 2-3 business days!
Refrigerator Screw – Part Number: WP489128
Refrigerator Screw
PartSelect #: PS11742733
Manufacturer #: WP489128
This screw is sold individually.
$11.95
  In Stock
Order now and your part arrives in 2-3 business days!
Dryer Motor Clip – Part Number: WPY015825
Dryer Motor Clip
★★★★★
★★★★★
(2)
PartSelect #: PS11757442
Manufacturer #: WPY015825
This motor clip is an original manufacturer replacement clip used to secure the motor in your home appliances. It holds the motor firmly to its housing to prevent shaking and potential damage while th...
$19.95
  In Stock
Order now and your part arrives in 2-3 business days!
Refrigerator Screw – Part Number: WP488234
Refrigerator Screw
PartSelect #: PS11742713
Manufacturer #: WP488234
This screw is sold individually. Size: 8-32 x 1/4 inch.
$8.95
  Special Order
Air Filter - Cut-to-Fit – Part Number: WP876775
Air Filter - Cut-to-Fit
PartSelect #: PS11746805
Manufacturer #: WP876775
This black air filter is twenty-four inches long.
  No Longer Available
Refrigerator Transformer Screw – Part Number: WP488787
Refrigerator Transformer Screw
PartSelect #: PS11742722
Manufacturer #: WP488787
This screw is sold individually. It is a genuine OEM replacement part, and it is designed for use with refrigerators. Most often it is used with the ice bucket ice deflector, retainer clip, and front ...
$11.95
  In Stock
Order now and your part arrives in 2-3 business days!
Silicone Rubber Adhesive – Part Number: WP279368
Silicone Rubber Adhesive
PartSelect #: PS11740605
Manufacturer #: WP279368
Silicone rubber adhesive is a high temperature adhesive that is used for gaskets on dryers and felt seals. It is used on many different appliances for many different application reasons. This silicone...
$54.40
  In Stock
Order now and your part arrives in 2-3 business days!
Refrigerator Screw 832 X 11/4 – Part Number: WP488163
Refrigerator Screw 832 X 11/4
PartSelect #: PS11742712
Manufacturer #: WP488163
Sold individually.
$9.95
  In Stock
Order now and your part arrives in 2-3 business days!

Common Symptoms of models starting with 1A

[Viewing 1 of 1]
Leaking
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
old fan motor made horrible screeching sound and siezed up
Removed 4 hex head screws around base of metal housing and 2 screws on bottom front holding on plastic grating and one screw holding housing to switch plate at top front. Hinged grating on back just pops off. Removed two screws holding fan motor on. Unclipped wire terminals (2). Bolted new fan in place.

One hitch was that one of the little terminal connectors that came with this fan motor was too small, so I had to buy some the right size, and strip the wire and crimp one of those on.

Also, this fan motor is two-speed, and my old dehumidifier is one-speed, so, according to the very helpful instructions, I just taped off one of the wires (not the one I would have guessed--it has you replacing the red with the black and taping off the new red one).

Then reassembled in reverse order, of course.

The only other thing is just that this stinkin' thing was so expensive, but it works fine. It's been humming away for days now, and my basement is once again in the pocket, about 50 - 55% humidity.

And it was pretty easy.
Parts Used:
DISCONTINUED
  • Dave from Roswell, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dehumidifier froze up to a solid block of ice
After completely thawing the frozen dehumidifier, I knew the chiller still worked but realized the blower fan did not spin. I ordered a replacement part from PartSelect.com. It arrived in 2 days. With unit unplugged, I removed set knob at the top of the front of the unit, removed two screws at bottom and removed the front grill face exposing the fan assembly. Next, I unplugged the two fan wires from their connections, removed 4 screws holding fan in place and removed old fan assembly. I then removed the fan blade assembly from old motor by loosing the compression screw and after a thorough cleaning of the fan blades, re-installed it on the new fan motor. The new fan assembly was re-installed with the 4 screws. The fan electrical connections were re-connected. (Note: only the Black and White wires were used as per the original assembly. The Orange wire was left unconnected but bundled with other wires and secured with a tie-wrap.) Dehumidifier was powered up and tested before front grill face was replaced. Mission Complete!
Parts Used:
DISCONTINUED
  • Robert from Ridley Park, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
5 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The humidifier would run continuously regardless of the humidity setting.
I removed the old humidistat and replaced it with the new one which was an exact fit.
Parts Used:
Humidistat Kit
  • Stephen from Richfield, NC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!