1695721 Murray Snow Blower - Overview
Models starting with 1695721
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Lawn Mower Ball Bearing
PartSelect #: PS8887153
Manufacturer #: 1705897SM
This ball bearing is sourced from the original equipment manufacturer and can be used in a variety of outdoor equipment. It has an inner diameter of 11/16 inches. The ball bearing provides support for...
$9.08
In Stock
Snow Blower Bushing
PartSelect #: PS8881538
Manufacturer #: 1667588SM
Sourced directly from the original manufacturer, this Bushing is used to reduce friction on your snowblower. It is made of durable white plastic, is not part of a kit or assembly, and is sold individu...
$6.28
In Stock
Lawn Mower Nut
PartSelect #: PS9999668
Manufacturer #: 703409
This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard siz...
$6.00
In Stock
Lawn Tractor hair Pin
PartSelect #: PS9999596
Manufacturer #: 703300
The hair pin is a silver, metal pin used to secure and lock parts in place. If broken, the part being secured will come loose and the pin should be replaced. This is an OEM part directly from the manu...
$4.99
In Stock
Snow Blower Bearing And Retainer Assembly
PartSelect #: PS9276637
Manufacturer #: 334163MA
No Longer Available
Snow Blower Self Locking Cotter Pin
PartSelect #: PS9072117
Manufacturer #: 7023590SM
$4.99
In Stock
Lawn Mower Flat Washer
PartSelect #: PS9999626
Manufacturer #: 703350
This flat washer is an OEM part that is silver in color, made of metal, and its job in your equipment is to spread load and pressure under a bolt. It can have multiple uses depending on your equipment...
$4.99
In Stock
Snow Blower Extension Self Lock Retaining Ring
PartSelect #: PS8877575
Manufacturer #: 1657528SM
$5.95
In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Refurbishing for next winter season
I replaced the auger belt and drive belt by separating the machine. The auger belt alone can be replaced by simply tilting without separating but the drive belt can not. So after separating the machine, I removed the auger belt by loosening the belt guide and removing the tensioner. I then loosened the nut that secures the drive wheel.
... Read more
This gave me enough play to remove the drive belt from the drive tensioner and then wiggle it from the drive wheel and out of the machine. Install by wiggling the belt back behind the drive wheel until you can slip it on the wheel. pull tensioner pulley out of the way to get the belt on the top pulley. Tighten the nut to secure the drive wheel. Reconnect the machine at the bottom of the auger housing and replace the auger belt, tensioner, and belt guide. Complete by replacing the upper bolts that hold the two parts together. I have not replaced the friction wheel as of yet. My process took 30 - 45 minutes for both belts.
Read less
Parts Used:
-
Kenneth from ALDAN, PA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Socket set, Wrench set
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!