1691490 Simplicity Lawn Tractor - Overview
Sections of the 1691490
[Viewing 18 of 18]-
42 48 Arbor Cover
-
42 48 Brake Group
-
42 48 Clutch Support Group
-
42 48 Height Adjusting Roller Group
-
42 48 Mower Housing Group
-
Brake Clutch Group
-
Decal Group
-
Electrical Group
-
Engine Group
-
Frame Group
-
Front Axle Group
-
Hood Grille Dash Group
-
Linkage Control Group
-
Peerless Gear Reduction Differential Model 1326
-
Seat Deck Group
-
Steering Front Wheel Group
-
Transmission
-
Transmission Rear Tire Group
Keep searches simple, eg. "belt" or "pump".
Lawn Mower Ball Bearing
PartSelect #: PS8887153
Manufacturer #: 1705897SM
This ball bearing is sourced from the original equipment manufacturer and can be used in a variety of outdoor equipment. It has an inner diameter of 11/16 inches. The ball bearing provides support for...
$9.08
In Stock
Fuel Filter
PartSelect #: PS17016257
Manufacturer #: 394358B
This Fuel Filter is a white plastic part attached within the fuel delivery system between the fuel tank and carburetor. Installation is rated as "Easy" and requires a set of pliers and a screwdriver. ...
$3.99
In Stock
Lawn Mower Cotter Pin
PartSelect #: PS9999599
Manufacturer #: 703312
This cotter pin is an OEM part that is 1.25 inches long, gold in color, and sold individually. Made of metal, it can have a range of applications on a variety of lawn and garden equipment. Generally, ...
$4.99
In Stock
Snow Blower Greased Bearing
PartSelect #: PS9270711
Manufacturer #: 2108202SM
This Ball Bearing is an individually sold, silver/black, metal part. It reduces friction in the spindle assembly between the spindle shaft and the spindle housing. If broken due to wear/fatigue, you w...
$12.95
In Stock
Lawn Mower Roller
PartSelect #: PS9900766
Manufacturer #: 1668513SM
Designed for use in Snapper and Simplicity ride-on mowers, this Roller is sourced directly from the manufacturer, is made of durable black plastic, is 4 inches long, and sold individually. The Roller ...
$11.44
Special Order
Lawn Tractor hair Pin
PartSelect #: PS9999596
Manufacturer #: 703300
The hair pin is a silver, metal pin used to secure and lock parts in place. If broken, the part being secured will come loose and the pin should be replaced. This is an OEM part directly from the manu...
$4.99
In Stock
Lawn Mower Switch & Key Assembly
PartSelect #: PS9264831
Manufacturer #: 1686734SM
Sold as a kit, including the metal body switch, a pair of keys, and the required hardware, this Ignition Switch Assembly has been sourced directly from the original manufacturer.
If you are unable t...
$43.64
Special Order
Lawn Mower Flange Locknut
PartSelect #: PS10000167
Manufacturer #: 703893
This centerlock nut, or lock nut, is sold individually and locks itself in place when inserted, to prevent it from backing out due to vibration. Over time, due to its strenueous job, it may become loo...
$7.22
In Stock
Lawn Mower Solenoid Kit
PartSelect #: PS9901149
Manufacturer #: 1686981YP
Introducing the starter solenoid from Simplicity, specially designed to ensure your lawn tractor operates smoothly and efficiently. This solenoid plays a crucial role in sending battery current to the...
$32.04
Special Order
Questions And Answers for 1691490
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Mistreated Briggs & Stratton 206 CC Engine on MTD Chipper
Removed tank and drained old gas.
Removed and disassembled carb. Needed new gaskets and seals, and had to clean corn syrup glaze (separated ethanol) from bowl and everywhere else with carb cleaner.
Throttle linkage was de-plating/rusty. Steel wool and WD40 got it moving again.
Cleaned spark plug electrode.
Reassemble ... Read more d, poured Sea Foam in the bottom of the tank and gave it a few pulls.
Let Sea Foam sit for a while, then filled the tank with Premium.
Blew white smoke for a minute then ran like new. Shredded for a while, then changed the oil.
Removed and disassembled carb. Needed new gaskets and seals, and had to clean corn syrup glaze (separated ethanol) from bowl and everywhere else with carb cleaner.
Throttle linkage was de-plating/rusty. Steel wool and WD40 got it moving again.
Cleaned spark plug electrode.
Reassemble ... Read more d, poured Sea Foam in the bottom of the tank and gave it a few pulls.
Let Sea Foam sit for a while, then filled the tank with Premium.
Blew white smoke for a minute then ran like new. Shredded for a while, then changed the oil.
Read less
Parts Used:
-
Dana from HAMMOND, IN
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set
7 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!