Back
Back
Keep typing for more specific results...

15009 - Overview

Models starting with 15009

Keep searches simple, eg. "belt" or "pump".
Lawn Mower Hex Washer Head Screw – Part Number: 710-0599
Lawn Mower Hex Washer Head Screw
PartSelect #: PS9298768
Manufacturer #: 710-0599
$4.44
  In Stock
Tiller Wheel Shaft Oil Seal – Part Number: 921-04031
Tiller Wheel Shaft Oil Seal
★★★★★
★★★★★
(1)
PartSelect #: PS10027983
Manufacturer #: 921-04031
This OEM Wheel Shaft Oil Seal is a black rubber part which attaches to the drive shaft to prevent leaks between the wheel shaft and transmission case. Installation is rated as "Medium" difficulty and ...
$12.17
  In Stock
Lawn Mower Washer – Part Number: 936-0119
Lawn Mower Washer
PartSelect #: PS9311087
Manufacturer #: 936-0119
This Washer-Lock 5/16 is a silver, metal part that is sold individually and comes direct from the manufacturer. With a 5/16 Inch Interior Diameter and 1/2 Inch Outside Diameter, it is used to prevent ...
$4.95
  On Order
Seal-Oil, Tiller Tine Shaft – Part Number: 921-04035
Seal-Oil, Tiller Tine Shaft
PartSelect #: PS9460854
Manufacturer #: 921-04035
  No Longer Available
Forward Idler Pulley – Part Number: 756-04170
Forward Idler Pulley
★★★★★
★★★★★
(1)
PartSelect #: PS9457633
Manufacturer #: 756-04170
This OEM Forward Idler Pulley attaches to the pivot bracket to allow the forward belt to idle when not in forward motion. If broken, the machine will no longer be able to propel forward, and the part ...
  No Longer Available
SPRAY PAINT, TROY-BILT RED,13 OZ. SPRYCN PWDR. – Part Number: 788-0638A
SPRAY PAINT, TROY-BILT RED,13 OZ. SPRYCN PWDR.
★★★★★
★★★★★
(1)
PartSelect #: PS9459506
Manufacturer #: 788-0638A
  No Longer Available
Keyed Washer 1.0 X 0.38 X 0.37 – Part Number: 736-04445
Keyed Washer 1.0 X 0.38 X 0.37
★★★★★
★★★★★
(1)
PartSelect #: PS9455313
Manufacturer #: 736-04445
  No Longer Available
Lawn Mower Curved Head Screw – Part Number: 710-1174
Lawn Mower Curved Head Screw
PartSelect #: PS10001859
Manufacturer #: 710-1174
$8.93
  Special Order
Knob-Depth Regulator – Part Number: GW-9119
Knob-Depth Regulator
PartSelect #: PS9463737
Manufacturer #: GW-9119
  No Longer Available
Lawn Mower Hex Screw – Part Number: 710-0514
Lawn Mower Hex Screw
PartSelect #: PS9089268
Manufacturer #: 710-0514
$4.36
  In Stock
Lawn Mower Ignition Switch: 5 Pin – Part Number: 925-0267B
Lawn Mower Ignition Switch: 5 Pin
PartSelect #: PS9310387
Manufacturer #: 925-0267B
This OEM 5 Pin ignition Switch is a silver, steel, individually sold part. It can be installed using a wrench and screwdriver, and has been rated as Easy to install. The part attaches to the dashboard...
$38.37
  In Stock
Lawn Mower Keys (Pair) – Part Number: 925-0201
Lawn Mower Keys (Pair)
PartSelect #: PS9171554
Manufacturer #: 925-0201
This pair of keys is supplied by the equipment manufacturer for use in lawn and outdoor power equipment. The key is made of metal and designed to prevent unauthorized use or accidental starting of the...
$10.03
  In Stock

Exact Part matches for your search term

[Viewing 2 of 2]
Screw-3/8x3"Hex Head Cap – Part Number: 15009
Screw-3/8x3"Hex Head Cap
This part number matches the current model number 15009
PartSelect #: PS9894185
Manufacturer #: 15009
  No Longer Available
Resistor – Part Number: 15009
Resistor
This part number matches the current model number 15009
PartSelect #: PS12185691
Manufacturer #: 15009
  No Longer Available
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Bearing seized
Pull belt cover, 2 nuts
Remove tensioner, 1 nut
Slide old tensioner off and replace
Parts Used:
Forward Idler Pulley
  • Gary from ELGIN, OK
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
1inch shaft and wheels have to be removed first.
Wheels had to be cut off of the axle in order to get to the seals. The center of wheel is 3in wide and axle isn't tappered on troy bilt pony model wheels where rusted on.
Parts Used:
Seal-Oil, Tiller Tine Shaft
  • Norman from RAINIER, WA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Socket set, Wrench set
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!