Back
Back
Keep typing for more specific results...

1342 - Overview

Models starting with 1342

Keep searches simple, eg. "belt" or "pump".
Range Burner Bowl 8 – Part Number: WB31T10015
Range Burner Bowl 8
★★★★★
★★★★★
(31)
PartSelect #: PS244399
Manufacturer #: WB31T10015
This part is located beneath the element and catches any spills.
$20.95
  In Stock
Range Burner Bowl 6 – Part Number: WB31T10014
Range Burner Bowl 6
★★★★★
★★★★★
(1)
PartSelect #: PS244398
Manufacturer #: WB31T10014
This burner bowl is also known as a burner drip bowl or burner drip pan, and is designed for use with your cooktop or range. It is black in color and is approximately 6 inches in diameter. It can be f...
$16.95
  In Stock
Dryer Screw – Part Number: WP90767
Dryer Screw
★★★★★
★★★★★
(2)
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$7.95
  In Stock
Range Door Handle End Cap – Part Number: WB7X7189
Range Door Handle End Cap
★★★★★
★★★★★
(6)
PartSelect #: PS256619
Manufacturer #: WB7X7189
This end cap can be used for either the left or right side.
$32.95
  In Stock
Filter A/C Cartridge – Part Number: 491588S
Filter A/C Cartridge
★★★★★
★★★★★
(4)
PartSelect #: PS8987387
Manufacturer #: 491588S
This is a replacement air filter/AC cartridge for your small engine. The air filter prevents dirt and debris from entering the engine. Over time, the air filter can become clogged or damaged, and this...
$7.06
  In Stock
Lawn Mower Spark Plug – Part Number: 796112S
Lawn Mower Spark Plug
★★★★★
★★★★★
(1)
PartSelect #: PS9140427
Manufacturer #: 796112S
This part is the replacement spark plug for your engine. It measures approximately 2.5 inches by 1 inch. The spark plug creates the spark that ignites fuel in your engine during the combustion process...
$4.99
  In Stock
Range Heat Resistant Adhesive – Part Number: W10841140
Range Heat Resistant Adhesive
★★★★★
★★★★★
(1)
PartSelect #: PS11728058
Manufacturer #: W10841140
This is a heat-resistant adhesive for your appliance. The heat resistance allows you to stick parts such as grate feet, gaskets, and felt seals in hot areas, such as a cooktop, without compromising th...
$17.95
  In Stock
Lawn Mower Flange Wheel Bearing – Part Number: 532009040
Lawn Mower Flange Wheel Bearing
★★★★★
★★★★★
(3)
PartSelect #: PS9006914
Manufacturer #: 532009040
The OEM bearing, also known as the flange bearing, is silver, made of metal, and sold individually. It is used on riding mowers to secure the wheel in place and allow it to rotate freely on the shaft....
$9.18
  In Stock
Terminal Block Kit – Part Number: WB17T10011
Terminal Block Kit
★★★★★
★★★★★
(13)
PartSelect #: PS953027
Manufacturer #: WB17T10011
This part provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).
$56.38
  In Stock
Lawn Mower Ring Clip – Part Number: 812000029
Lawn Mower Ring Clip
★★★★★
★★★★★
(1)
PartSelect #: PS9143890
Manufacturer #: 812000029
The Ring Klip Number T5304-75, also known simply as a ring clip, is an OEM part designed to secure your mower wheel to its axle. This part is black, made of metal, and around an inch in length. It i...
$5.95
  In Stock
Lawn Mower Hex Head Bolt – Part Number: 584953901
Lawn Mower Hex Head Bolt
PartSelect #: PS9982804
Manufacturer #: 584953901
This part is the replacement washer head screw for your lawn tractor. It is black in color and is approximately an inch and a half in length. This self-threading screw is most commonly used for securi...
$3.99
  In Stock
Engine Breather Tube Grommet – Part Number: 692189
Engine Breather Tube Grommet
★★★★★
★★★★★
(1)
PartSelect #: PS9294797
Manufacturer #: 692189
This OEM grommet, also called a 90-degree breather tube, is sold individually. Black in color and made of rubber, this is a 90-degree elbow for the crankcase breather tube of your mower engine. If you...
$5.34
  Special Order

Common Symptoms of models starting with 1342

[Viewing 4 of 4]
Leaking
Fixed by
these parts
Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Element will not heat
Fixed by
these parts
Fixing
Show All
Cannot pull starter cord out or engine will not turn over
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
terminal block melted
The existing terminal block on my Ge oven/Range had melted due to a loose wire causing sparking and starting the plastic casing of the terminal block on fire and melting it, Part select made the part easy to find and had it at my house in 2 days. All I had to do was remove six screws to take the back sheet metal cover off of the oven. Unscrew the terminal connections remove two mounting screws that held the terminal on to the oven body. This was a little trickier than it should have been because the melted plastic had reformed making it very hard to access the mounting screws. i then mounted the new piece and plugged the oven in, it took 15 minutes and was very easy. definitely saved me at-least a $100 for the service call i would have made if finding the part wasn't so convenient
Parts Used:
Terminal Block Kit
  • jonathan from willow springs, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
54 of 73 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The gasket needed to be replaced in top oven, it was brittle and broken.
We took out the philips screws on the right and left side of inside of the oven and two hex head screws on the clip on the top of the oven in the front. Then using a slot screw driver pryed the oven liner out enough to remove old gasket and replace the new gasket. We did see in some online directions that we were suppose to remove entire oven from cabinet and loosen bolts in the back. But, we were able to get enough space to get the old gasket out and new one installed. We did use a 1/4" thick piece of wood on face of oven to prevent any denting of oven when prying out the liner of the oven.
Parts Used:
Door Gasket
  • JoAnn from Auburn, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
19 of 27 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wheel bushings were bad
Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat other side.
Parts Used:
Lawn Mower Ring Clip Lawn Mower Axle Hub Cap
  • Anthony from OLIVEHILL, TN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
22 of 36 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!