Back
Back
Keep typing for more specific results...

128432-0116-E1 Briggs and Stratton Engine - Overview

Sections of the 128432-0116-E1

[Viewing 8 of 8]
Keep searches simple, eg. "belt" or "pump".
Engine Ratchet Pawl – Part Number: 281505S
Engine Ratchet Pawl
PartSelect #: PS8942598
Manufacturer #: 281505S
The manufacturer-approved Ratchet Pawl (Starter Pawl) comes in a set of two (2). This part attaches inside the recoil assembly, and is used to engage the flywheel. if broken due to wear/damage it will...
$3.99
  In Stock
Order within the next 7 hrs and your part ships today!
Engine Float Valve Kit – Part Number: 398188
Engine Float Valve Kit
★★★★★
★★★★★
(1)
PartSelect #: PS8963322
Manufacturer #: 398188
This needle and seat kit, also known as a float valve, is found in many types of liquid-fueled lawn equipment, such as carburetors. The valve regulates the flow of fuel into the float bowl. The needle...
$6.97
  In Stock
Order within the next 7 hrs and your part ships today!
Spark Plug – Part Number: 491055S
Spark Plug
★★★★★
★★★★★
(2)
PartSelect #: PS9281094
Manufacturer #: 491055S
$4.99
  In Stock
Order within the next 7 hrs and your part ships today!
Engine Pulley Spring Assembly – Part Number: 498144
Engine Pulley Spring Assembly
★★★★★
★★★★★
(2)
PartSelect #: PS8988822
Manufacturer #: 498144
Upgrade your equipment with this reliable Pulley/Spring Assembly from Briggs and Stratton. Known for their superior quality, Briggs and Stratton parts are designed to help prolong the life of your mac...
$20.78
  In Stock
Order within the next 7 hrs and your part ships today!
Engine Hose Connector – Part Number: 692317
Engine Hose Connector
★★★★★
★★★★★
(1)
PartSelect #: PS9074730
Manufacturer #: 692317
$7.06
  In Stock
Order within the next 7 hrs and your part ships today!
Engine Float Bowl Gasket – Part Number: 693981
Engine Float Bowl Gasket
PartSelect #: PS9064482
Manufacturer #: 693981
$4.99
  In Stock
Order within the next 7 hrs and your part ships today!
Bowl-Float – Part Number: 796611
Bowl-Float
★★★★★
★★★★★
(1)
PartSelect #: PS9306908
Manufacturer #: 796611
  No Longer Available
Engine Flywheel Key – Part Number: 222698S
Engine Flywheel Key
★★★★★
★★★★★
(1)
PartSelect #: PS8925657
Manufacturer #: 222698S
$4.99
  In Stock
Order within the next 7 hrs and your part ships today!
Engine Pawl Friction Plate – Part Number: 692299
Engine Pawl Friction Plate
★★★★★
★★★★★
(1)
PartSelect #: PS9074726
Manufacturer #: 692299
$5.60
  Special Order
Engine Fuel Tank – Part Number: 799863
Engine Fuel Tank
★★★★★
★★★★★
(1)
PartSelect #: PS9141053
Manufacturer #: 799863
This genuine fuel tank assembly is sourced directly from the original equipment manufacturer and is specifically designed for use with Briggs & Stratton engines on lawn and garden equipment. It serves...
$98.07
  In Stock
Order within the next 7 hrs and your part ships today!
Engine Oil Seal – Part Number: 299819S
Engine Oil Seal
PartSelect #: PS8948679
Manufacturer #: 299819S
This OEM Oil Seal is an individually sold rubber part which is attached around the axis shaft on the crankcase housing to provide a proper seal. A broken seal will lead to a leak, and the part should ...
$5.99
  In Stock
Order within the next 7 hrs and your part ships today!
Engine Air Filter Cartridge – Part Number: 697029
Engine Air Filter Cartridge
PartSelect #: PS9066438
Manufacturer #: 697029
$14.90
  On Order

Questions And Answers for 128432-0116-E1

Be the first to ask our experts a question about this model!

Common Symptoms of the 128432-0116-E1

[Viewing 2 of 2]
Will Not Start
Fixed by
these parts
Fixing
Show All
Cannot pull starter cord out or engine will not turn over
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Mistreated Briggs & Stratton 206 CC Engine on MTD Chipper
Removed tank and drained old gas.
Removed and disassembled carb. Needed new gaskets and seals, and had to clean corn syrup glaze (separated ethanol) from bowl and everywhere else with carb cleaner.
Throttle linkage was de-plating/rusty. Steel wool and WD40 got it moving again.
Cleaned spark plug electrode.
Reassembled, poured Sea Foam in the bottom of the tank and gave it a few pulls.
Let Sea Foam sit for a while, then filled the tank with Premium.
Blew white smoke for a minute then ran like new. Shredded for a while, then changed the oil.
Parts Used:
Engine Carburetor Overhaul Kit
  • Dana from HAMMOND, IN
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
7 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Parts fit like a glove
Removed pull start assembly down to the crank. Installed motor housing, motor fan & rewind assembly. All went real good.
Parts Used:
Engine Fan Flywheel Engine Rewind Starter Housing-Blower
  • Wayne from OOLTEWAH, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Socket set
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Starter Rewind broke internally-rope did not work
Removed old broken rewind starter (4 bolts); found the Model and Serial numbers; found Parts Direct and ordered new assembly; upon delivery, reinstalled with new Starter and hardware.
Parts Used:
Engine Rewind Starter
  • Mark from N FRANKLIN, CT
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!