125E - Overview
Models starting with 125E
Click on the best match to narrow your results.
- 125E (125 E 2008-01) Husqvarna Edger (Edger)
- 125E (125 E 2006-03) Husqvarna Edger (Edger)
- 125E (125 E 2006-01) Husqvarna Edger (Edger)
- 125E (125 E 2005-09) Husqvarna Edger (Edger)
- 125E (125 E 1993-04) Husqvarna Edger (Edger)
- 125E (19931400001-20061000000) Husqvarna Trimmer (125 E 19931400001-20061000000)
- 125E ( 545014318 2009-09 ) Husqvarna Trimmer (125 E (2009-09) (545014318))
- 125E (20061000001-20082200000) Husqvarna Edger (125 E (20061000001-20082200000))
- 125E Husqvarna Edger (125 E)
- 125E (20082200001-Current) Husqvarna Edger (125 E (20082200001-Current))
- 125E (2006-01) Husqvarna Edger (125 E (Usa, Canada) (2006-01))
- 125E (20061100001-20082299999) Husqvarna Edger (125 E (20061100001-20082299999))
- 125E ( 545014388 2009-09 ) Husqvarna Edger (125 E (Us/Can) (545014388) (2009-09))
- 125E-CANADA Husqvarna Trimmer (Gas Line Trimmer)
- 125E448G352 (1995) MTD Lawn Mower (Lawn Mower)
- 125E847E00 MTD Lawn Mower (MTD Lawn Mower Model 125E847E00 Parts)
- 125E898O100 (1995) Cub Cadet Lawn Mower (Cub Cadet Lawn Mower Model 125E898O100/1995 Parts)
- 125E898O190 MTD Lawn Mower (MTD Lawn Mower Model 125E898O190 Parts)
- 125E898O190 (1995) MTD Lawn Tractor (Lawn Tractor)
Keep searches simple, eg. "belt" or "pump".
Trimmer Fuel Filter
PartSelect #: PS9285148
Manufacturer #: 530095646
This Genuine OEM fuel filter is designed to maintain the performance and longevity of your equipment by preventing dirt and debris from entering the carburetor. Located inside the fuel tank, this esse...
$5.95
In Stock
Lawn Mower Carburetor Overhaul Kit
PartSelect #: PS8984098
Manufacturer #: 498260
This is a replacement carburetor overhaul kit for your small engine. The carburetor is essential to the overall performance of your engine, and the carb can get clogged up over time for a variety of r...
$17.96
In Stock
Lawn Mower Mulching Blade (21-In)
PartSelect #: PS9169783
Manufacturer #: 942-0741A
This authentic replacement blade is manufactured for use with Craftsman walk-behind lawnmowers and is designed to deliver clean, efficient cuts. Measuring 21 inches in length, the blade features an an...
$29.79
In Stock
Lawn Mower Air Cleaner Gasket
PartSelect #: PS9138757
Manufacturer #: 795629
The Air Cleaner Gasket is used to provide a seal between the air cleaner base, and carburetor. It's a gray, composite material part, which is rated as "Easy" to install and will require a screw driver...
$5.19
In Stock
Trimmer Filter
PartSelect #: PS9005902
Manufacturer #: 530150253
The air filter prevents dirt and debris from entering the engine on your lawn equipment. This is an OEM filter that is white, roughly 2x3.5 inches in dimension, and can only be purchased individually....
$5.95
In Stock
Spark Plug
PartSelect #: PS9484192
Manufacturer #: 952030150
This genuine Spark Plug, RCJ8Y, is sold individually, comprised of steel and ceramic, and is white and silver in color. The function of the spark plug is to ignite a mixture of air and fuel in the com...
$5.71
Special Order
Engine Float Valve Kit
PartSelect #: PS8963322
Manufacturer #: 398188
This needle and seat kit, also known as a float valve, is found in many types of liquid-fueled lawn equipment, such as carburetors. The valve regulates the flow of fuel into the float bowl. The needle...
$6.97
In Stock
Engine Crankcase Gasket
PartSelect #: PS9066140
Manufacturer #: 692232
This part is the replacement gasket for the crankcase on your engine. The gasket helps to create a seal on the crankcase and prevent leaks. If you notice that your engine is not running at peak perfor...
$6.39
Special Order
Engine Pulley Spring Assembly
PartSelect #: PS8988822
Manufacturer #: 498144
Upgrade your equipment with this reliable Pulley/Spring Assembly from Briggs and Stratton. Known for their superior quality, Briggs and Stratton parts are designed to help prolong the life of your mac...
$20.78
In Stock
Engine Recoil Starter Assembly
PartSelect #: PS8981884
Manufacturer #: 497680
This authentic OEM starter assembly is designed for use with lawn and garden engines and is sourced directly from the original manufacturer to ensure quality and compatibility. The assembly includes a...
$54.79
In Stock
Exact Part matches for your search term
[Viewing 1 of 1]
DISCONTINUED
This part number matches the current model number 125E
PartSelect #: PS320339
Manufacturer #: 125E
No Longer Available
Common Symptoms of models starting with 125E
[Viewing 5 of 5]Will Not Start
Fixed by
these parts
these parts
Show All
Mower blade does not cut
Fixed by
these parts
these parts
Show All
Engine stops after a few seconds or minutes
Fixed by
these parts
these parts
Show All
Engine will not idle
Fixed by
these parts
these parts
Show All
Cannot pull starter cord out or engine will not turn over
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
starter rewind cord broke
I found the model number of the Briggs & Stratton engine on the inside of the engine housing. Ordered a new starter-rewind unit, as the old cord broke and the thing was well worn. The instructions were clear enough, but to get the old starter off I had to drill out four rivets, which just spin around when you try. I used a hacksaw, chisel
... Read more
, pliers, whatever worked on each rivet; this took a while. When they were finally removed, the new starter pull unit was relatively easy to install with the small nuts and bolts provided. On the Yard Machines log splitter, putting back the engine housing is quite tricky; you have to jostle the thing into place, get the pull handle above the cover and line up the bolt holes.
Read less
Parts Used:
-
Seikai from MARICOPA, CA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
14 of 20 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Smelled Gas Leaks
Inspected/removed fuel lines and found signs of leak. Removed and inspected carburetor and found that seals and gaskets were toast. Replaced said seals with ones from the kit that fit and replaced fuel lines.
Would be nice to have a fuel line kit with the big fuel line (tank to carb) and the little one (carb to engine) together ... Read more with all the necessary clamps.
Would be nice to have a fuel line kit with the big fuel line (tank to carb) and the little one (carb to engine) together ... Read more with all the necessary clamps.
Read less
Parts Used:
-
Jonathan from LIBERTY TWP, OH
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Socket set
6 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!