120MARKII Husqvarna Chainsaw - Overview
Models starting with 120MARKII
Click on the best match to narrow your results.
- 120MARKII ( 967861901,967861903,967861904,967861905,967861906,967861907 2018-05 ) Husqvarna Chainsaw (Chain Saw)
- 120MARKII ( 967861902 2018-05 ) Husqvarna Chainsaw (Chain Saw)
- 120MARKII ( 967861901 2018-05 ) Husqvarna Chainsaw (120 Mark Ii - 967861901 (2018-05))
- 120MARKII ( 967861912 20191400001-Current ) Husqvarna Chainsaw (120 Mark Ii - 967861912 (20191400001-Current))
- 120MARKII ( 967861901 20181800001-Current ) Husqvarna Chainsaw (120 Mark Ii - 967861901 (20181800001-Current))
- 120MARKII ( 967861934 2019-04 ) Husqvarna Chainsaw (120 Mark Ii - 967861934 (2019-04))
- 120MARKII ( 967861902 20181800001-Current ) Husqvarna Chainsaw (120 Mark Ii - 967861902 (20181800001-Current))
- 120MARKIII Husqvarna Chainsaw (120 Mark Iii)
Keep searches simple, eg. "belt" or "pump".
Chainsaw Fuel Line Fitting
PartSelect #: PS9469715
Manufacturer #: 530023877
The Fuel Line Fitting is a plastic part which attaches two pieces of fuel line together. If broken due to damage/fatigue, there may be a leak and the part must be replaced. Installation is rated as "E...
$8.04
Special Order
Trimmer Fuel Tank Bushing
PartSelect #: PS11824288
Manufacturer #: 580457501
Used to seal the fuel tank to prevent leaks and allow the fuel line to enter through it, this Fuel Tank Bushing is sourced directly from the manufacturer. It is made of black rubber, is not part of a ...
$7.46
In Stock
Trimmer Spark Plug
PartSelect #: PS8996057
Manufacturer #: 503235111
Compatible with over 150 models of lawn equipment, this Spark Plug has been sourced directly from the original manufacturer. It is sold individually, made of metal and ceramic components, and is not p...
$6.89
In Stock
Chainsaw Bar Adjuster Pin
PartSelect #: PS9469135
Manufacturer #: 530015826
This Bar Pin Adjuster is an OEM part used to adjust the tension on the bar, which loosens or tightens the chain. It attaches to the slot in the bar, and the chainsaw bar adjusting screw. Installation ...
$6.22
Special Order
Trimmer Check Valve
PartSelect #: PS9002985
Manufacturer #: 530026119
This check valve, also known as a one-way valve, is a genuine OEM part that regulates the flow of fuel/oil in the equipment engine to prevent it from flowing backwards. It is made of plastic and desig...
$6.22
In Stock
Common Symptoms of models starting with 120MARKII
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The metal band that tightens on the "flywheel" had broken.
I looked at just buying the metal band for about $5. But I noted it would have required having to compress a spring in a very small area. Since my saw is over 5 years old I figured I might as well get the whole chain brake assembly which includes the cover, and all the guts that are in that cover. This included the metal band and the s
... Read more
pring already installed. I think my time is worth something and not being frustrated with getting all the parts back in place was worth the extra $15. As far as the actual work this is how it went. Remove two large nuts on side of saw. Remove damaged cover. Put on new cover. Tighten 2 nuts. Adjust tension of chain. Only trick would be to check that the chain brake lever is not in the forward position (where it would stop the chain from turning). It should be in the back position (towards the top handle) to put back on the cover. Love this saw by the way for cutting small trees for firewood.
Read less
Parts Used:
-
Heidi from Lincoln, MT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!