Back
Back
Keep typing for more specific results...

1130ST Snow Blower - Overview

Models starting with 1130ST

Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Lawn Mower Hex Washer Head Screw – Part Number: 710-0599
Lawn Mower Hex Washer Head Screw
PartSelect #: PS9298768
Manufacturer #: 710-0599
$4.44
  In Stock
Snow Blower Chute – Part Number: 585056901
Snow Blower Chute
★★★★★
★★★★★
(1)
PartSelect #: PS11824789
Manufacturer #: 585056901
This chute base, also known as a discharge chute base, is sourced from the original manufacturer for use with snowblowers. It is found at the end of the discharge chute which is responsible for direct...
$12.71
  In Stock
Snow Blower Drive Clutch Cable – Part Number: 946-0898
Snow Blower Drive Clutch Cable
PartSelect #: PS9170572
Manufacturer #: 946-0898
$31.08
  In Stock
Snow Blower Auger Clutch Cable – Part Number: 946-0897
Snow Blower Auger Clutch Cable
PartSelect #: PS9170571
Manufacturer #: 946-0897
$26.60
  In Stock
Snow Blower Hex Flange Bearing – Part Number: 941-0245
Snow Blower Hex Flange Bearing
PartSelect #: PS9178250
Manufacturer #: 941-0245
Used mainly in snow blowers, this flange bearing is typically installed on the axle and creates a tight fit with little friction while still allowing for movement.?Your equipment will likely feature m...
$9.89
  In Stock
Nut Lock 5/16-18 – Part Number: 873800500
Nut Lock 5/16-18
PartSelect #: PS9160134
Manufacturer #: 873800500
Nut lock 5/16-18 (5/1 Lock nut) is a 5/1-18 inch silver metal nut. It can be installed using a wrench or socket to secure parts in pace, and to lock down to prevent backing out due to vibration. If da...
  No Longer Available
Snow Blower Worm Gear – Part Number: 917-04861
Snow Blower Worm Gear
PartSelect #: PS9165943
Manufacturer #: 917-04861
This is a worm gear that is designed for use within a variety of snowblowers and snowblower tractor attachments. The worm gear is used to rotate the auger through the drive mechanism, also known as th...
$48.35
  In Stock
Snow Blower Left Hand Skid Plate – Part Number: 532174762
Snow Blower Left Hand Skid Plate
PartSelect #: PS9013356
Manufacturer #: 532174762
$9.96
  In Stock
Lawn Mower Washer – Part Number: 936-0119
Lawn Mower Washer
PartSelect #: PS9311087
Manufacturer #: 936-0119
This Washer-Lock 5/16 is a silver, metal part that is sold individually and comes direct from the manufacturer. With a 5/16 Inch Interior Diameter and 1/2 Inch Outside Diameter, it is used to prevent ...
$4.95
  In Stock
Snow Blower Deflector Spring – Part Number: 532184505
Snow Blower Deflector Spring
PartSelect #: PS9019975
Manufacturer #: 532184505
$7.46
  In Stock
Lawn Mower Extension Spring – Part Number: 932-0264
Lawn Mower Extension Spring
★★★★★
★★★★★
(1)
PartSelect #: PS9310931
Manufacturer #: 932-0264
This is a genuine OEM sourced part that is not part of a kit or assembly and is sold individually. This Spring Extension, or Extension Spring, serves a variety of purposes, depending on your model. It...
$5.07
  On Order
Impeller Belt – Part Number: 532408010
Impeller Belt
PartSelect #: PS9017822
Manufacturer #: 532408010
  No Longer Available
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Needed a couple washers and a spring broken drive sprocket
Machined new center hub for sprocket attatched it to sprocket restacked everything back together adjusted tracks going to change oil fire it up see how it all works
Parts Used:
Steering Link
  • STEVE from COLBERT, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Original shave plate badly worn
With WD-40 or equivalent, spray the four nuts on the underside of the snow blower housing that hold the shave plate to the housing. Also spray the two bolts that hold the shave plate to the side of the housing. Let sit for a few minutes and using a 1/2" box end wrench remove the four nuts on the bottom of the housing. If necessary, apply heat with a torch to loosen. Using a 9/16" box end wrench, remove the nuts on the sides (these also hold the adjustable skid feet). It is recommended that the bottom bolts and nuts be replaced with 5/16-18 X 3/4" long zinc plated carriage bolts using zinc plated washers and ny-lock nuts. It is also recommended that all of th screw threads be coated with an anti- seize lubricant so disassembly at a later date will be easy.
Parts Used:
Snow Blower Shave Plate (26 In)
  • John from HARRISVILLE, NH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Wrench set
5 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!