1130SBXLSB Husqvarna Snow Blower - Overview
Models starting with 1130SBXLSB
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Snow Blower Chute
PartSelect #: PS11824789
Manufacturer #: 585056901
This chute base, also known as a discharge chute base, is sourced from the original manufacturer for use with snowblowers. It is found at the end of the discharge chute which is responsible for direct...
$12.71
In Stock
Nut Lock 5/16-18
PartSelect #: PS9160134
Manufacturer #: 873800500
Nut lock 5/16-18 (5/1 Lock nut) is a 5/1-18 inch silver metal nut. It can be installed using a wrench or socket to secure parts in pace, and to lock down to prevent backing out due to vibration. If da...
No Longer Available
Bolt-Carriage (5/16-18x5/8)
PartSelect #: PS9308328
Manufacturer #: 872110505
This OEM Bolt-Carriage (5/16-18x5/8) is used to secure parts in place on a range of equipment, and can be installed using a wrench or socket. Refer to your make model and diagrams to ensure this is th...
No Longer Available
Snow Blower Deflector Cable
PartSelect #: PS9982827
Manufacturer #: 585271601
This control cable is designed to give the user the ability to control the deflector, also known as the chute, for their snowblower and control where the snow that is discharged from it goes. Designed...
$43.58
In Stock
Snow Blower Klik Pin
PartSelect #: PS9012243
Manufacturer #: 532155443
This OEM-sourced klik-pin, also known as a linchpin or a wheel-locking pin, is a 1/4-inch diameter fastener commonly found on the wheel assemblies of your snowblower. Its purpose is to secure the whee...
$8.71
On Order
Locknut, Hex 1/4-20
PartSelect #: PS9308352
Manufacturer #: 873680400
This manufacturer-approved 1/4 Hex Nut can be installed using a wrench or socket, and is used to secure parts in place. Refer to your make, model number and diagrams to ensure this is the right part for you.
No Longer Available
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Needed a couple washers and a spring broken drive sprocket
Machined new center hub for sprocket attatched it to sprocket restacked everything back together adjusted tracks going to change oil fire it up see how it all works
Parts Used:
-
STEVE from COLBERT, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Socket set
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!