Back
Back
Keep typing for more specific results...

113-072A009 (1993) MTD Lawn Mower - Overview

Sections of the 113-072A009

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Lawn Mower Hex Washer Head Screw – Part Number: 710-0599
Lawn Mower Hex Washer Head Screw
PartSelect #: PS9298768
Manufacturer #: 710-0599
$4.44
  In Stock
Lawn Mower Knob Lever Assembly – Part Number: 94832
Lawn Mower Knob Lever Assembly
★★★★★
★★★★★
(1)
PartSelect #: PS10034156
Manufacturer #: 94832
The Lever and Knob Assembly (or Front Wheel Height Adjuster) is used to adjust the front height of the mower, and attaches on the front wheels. It can be installed using a socket set and wrench set, a...
$13.50
  Special Order
Lawn Mower Hex Cap Screw – Part Number: 710-1044
Lawn Mower Hex Cap Screw
PartSelect #: PS10001848
Manufacturer #: 710-1044
$4.97
  Special Order
Pin-Hinge – Part Number: 747-0710A
Pin-Hinge
PartSelect #: PS9455906
Manufacturer #: 747-0710A
This hinge pin is an OEM part that is designed to hold the chute to the bracket of your lawn mower, allowing the shute to move upward and downward. It is silver, made of metal, and it is around 5 inch...
  No Longer Available
Edger Throttle Box – Part Number: 811-0185
Edger Throttle Box
PartSelect #: PS9143419
Manufacturer #: 811-0185
$39.37
  In Stock
Lawn Mower Trottle Control Wire – Part Number: 946-0671A
Lawn Mower Trottle Control Wire
PartSelect #: PS9311802
Manufacturer #: 946-0671A
This Throttle Control Wire is a 55-inch black Throttle Cable, made of metal with a rubberized casing. It's rated as "Easy" to install, attaching from the throttle control to the carburetor, and requir...
$15.08
  In Stock
Nut-Wing 1/4-20 – Part Number: 712-0397A
Nut-Wing 1/4-20
PartSelect #: PS10003352
Manufacturer #: 712-0397A
  No Longer Available
Lawn Mower Wheels W/O Bearings Gray – Part Number: 734-1826
Lawn Mower Wheels W/O Bearings Gray
PartSelect #: PS9301691
Manufacturer #: 734-1826
$42.29
  In Stock
Lawn Mower TapTite Screw – Part Number: 710-0654A
Lawn Mower TapTite Screw
PartSelect #: PS9100242
Manufacturer #: 710-0654A
$4.77
  In Stock
Lawn Mower Curved Head Screw – Part Number: 710-1174
Lawn Mower Curved Head Screw
PartSelect #: PS10001859
Manufacturer #: 710-1174
$8.93
  Special Order
Lawn Mower Rope Guide – Part Number: 710-1205
Lawn Mower Rope Guide
PartSelect #: PS10001864
Manufacturer #: 710-1205
$5.95
  In Stock
Edger Throttle Body – Part Number: 946-0875
Edger Throttle Body
PartSelect #: PS9168110
Manufacturer #: 946-0875
$9.95
  On Order

Questions And Answers for 113-072A009

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Rear flap had deteriorated.
Grip each retaining clip next to the housing with large pliers. Squeeze clip completely and pull straight out. Important: Do not attempt to bend clip up or down as clip may bend and become very difficult to remove. When old flap is removed, mower edge can be cleaned and painted to avoid rust. Install new flap in same direction front/rear as removed flap. Reinstall clips in same direction as they were, as up and down sides are not the same.
Parts Used:
Rear Flap (22&#34)
  • David from PITTSBURGH, PA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!