11071402312 Kenmore Dryer - Overview
Sections of the 11071402312
[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Dryer Igniter Kit
PartSelect #: PS334180
Manufacturer #: 279311
If your dryer will not heat, takes too long to dry, or does not provide enough heat, you might want to replace your igniter kit. This silicone carbide igniter with ceramic holder kit includes the 3-in...
$35.67
In Stock
Dryer Screw
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$7.95
In Stock
Dryer Liquid Propane Conversion Kit
PartSelect #: PS3493998
Manufacturer #: 49572A
This part converts your appliance from Natural Gas to Liquid Propane.
$32.51
In Stock
Dryer Natural Gas Orifice
PartSelect #: PS11740485
Manufacturer #: WP234826
Introducing the Whirlpool Natural Gas Orifice for Dryer Gas Valve, a genuine OEM part specifically designed for select models of Whirlpool dryers. Renowned for its superior functionality, this Burner ...
$25.95
In Stock
Gas Valve Kit
PartSelect #: PS334359
Manufacturer #: 279923
This gas valve kit comes with the wiring harness.
$150.30
In Stock
Valve Coil
PartSelect #: PS11752967
Manufacturer #: WPW10328463
Introducing the COIL-VALVE, a true genuine OEM part from the trusted brand Whirlpool. This essential set functions as the dryer's gas valve coil, responsible for opening the gas valves while your drye...
$61.30
On Order
Burner Gas
PartSelect #: PS11723181
Manufacturer #: W10823508
With this dryer burner assembly comes with the igniter, burner, safety valve with coils, manifold and the hardware.
$164.11
In Stock
Questions And Answers for 11071402312
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the 11071402312
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No heat to dry clothes
First I took the front of the dryer off then located the igniter. It only required removing two screws, removing old igniter, replacing with new igniter, and replacing the two screws.. While I was replacing the igniter I took the drum out and throughly cleaned the inside. Lucky me, I found 85 cents on the floor of the dryer. I am 65yr
... Read more
s old, married and mother of two.
This was easy to do and sure saved money. I reccommend others try to do repairs for themselves and using PartSelect was less expensive too.
This was easy to do and sure saved money. I reccommend others try to do repairs for themselves and using PartSelect was less expensive too.
Read less
Parts Used:
-
Karen from Pine Mtn. Club,, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
66 of 76 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
cocverting natural gas to propane gas
removed burner installed propane orfice and kit as per instruction sheet.
Parts Used:
-
Billy from Maryville, TN
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers, Wrench set
43 of 75 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no heat
the ignitor did not glow red checked thermal fuse by exhaust duct. fuse open replaced thermal fuse
Parts Used:
-
rex from streator, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Wrench (Adjustable)
30 of 39 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!