EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
Back
Back
Keep typing for more specific results...
Models > 11047532601 > Symptoms > Will Not Start

Parts That Fix Kenmore Washer 11047532601 Will Not Start

Will Not Start is a commonly reported symptom for the 11047532601 Kenmore Washer, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your 11047532601 Kenmore Washer that will fix Will Not Start. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
Will Not Start is a commonly reported symptom for the 11047532601 Kenmore Washer, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your 11047532601 Kenmore Washer that will fix Will Not Start. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
Fixes Symptom 82% of time

This part ensures that your door stays locked while the machine is running.

$ 122.83
  In Stock
PartSelect Number PS11751211
Manufacturer Part Number WPW10253483

Replacing your Whirlpool Washer Washer Door Lock Latch

Replacing your Washer Door Lock Latch

Customer Repair Stories

the latch broke on my front loading washer.
My son did the repair.So I just know he got it working.Also the part I order came the next day after I called.And if I ever need another part for any of my other appliance I will be sure to call you.And I have told other people I know about you Thanks alot.Deborah Gaffney
  • Deborah S from Connellsville, PA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
34 of 49 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door latch module was defective
This model is a front-loading washer. The spring loaded retainer for the front of the boot must be removed, then the boot can moved to the side exposing the module. Remove the two screws holding the model, pull the model out, remove the three electrical plugs, then reverse this procedure to install new module.
  • Carlton from Greer, SC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
100 of 119 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fixes Symptom 18% of time

This is a manufacturer-approved replacement drain pump for your washing machine. To complete this repair you will need a 1/4 inch nut driver, 5/16ths nut driver, a flat blade screwdriver, and a pair of pliers. Make sure to disconnect power to the washer before beginning this repair.

$ 108.95
  In Stock
PartSelect Number PS11757304
Manufacturer Part Number WPW10730972

Replacing your Whirlpool Washer Washer Drain Pump

Replacing your Washer Drain Pump

Customer Repair Stories

water pump failed
Pump started making noises like ball bearings grinding. took the lower front cover off pulled the strainer out of the pump housing and found $2.55 in nickles dimes and quarters. Some 223 bullets and about 20 bobby pins. Together they had destroyed the impeller, so ordering a new one and installing it did the trick. Easy installation about 15mins.
  • Kurt from Caliente, NV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
95 of 107 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
F 21 error
Removed the front panel unplugged
The washer drained water out, lift the washer up to un screw the drain pump. Then unhooked the hoses from pump put the other pump in.
  • Andrew from St.Louis, MO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
374 of 421 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!