Parts That Fix Kenmore Washer 11020222510 Leaking
Leaking is a commonly reported symptom for the 11020222510 Kenmore Washer, and we have put together a full guide
... Read more
on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your 11020222510 Kenmore Washer that will fix Leaking.
We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
Read less
Leaking is a commonly reported symptom for the 11020222510 Kenmore Washer, and we have put together a full guide on how to fix this.
This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your 11020222510 Kenmore Washer that will fix Leaking.
We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
Fixes Symptom 50% of time
The drain hose carries used water from the washer to your house drain.
$
25.15
In Stock
PartSelect Number PS12578897
Manufacturer Part Number W11244231
Replacing your Whirlpool Washer Drain Hose
Customer Repair Stories
My washer's drain hose was leaking.
Step 1: Disconnected power cord and pulled drain hose from the trap in the wall.
Step 2: Loosened clamp on the hose connected to the washer with a set of pliers and pulled the drain hose out of the bottom of the washer.
Step 3: Took the new hose and clamp and placed it back into the bottom of washer, making sure th ... Read more at the clamp was secured around the correct placing on the hose.
Step 4: Placed curved part of the hose back into trap, making sure it was secure.
(Final) Step 5: Plugged the washer back in. Ran through a small washing cycle to make sure hose wasn't leaking out of either end.
Step 2: Loosened clamp on the hose connected to the washer with a set of pliers and pulled the drain hose out of the bottom of the washer.
Step 3: Took the new hose and clamp and placed it back into the bottom of washer, making sure th ... Read more at the clamp was secured around the correct placing on the hose.
Step 4: Placed curved part of the hose back into trap, making sure it was secure.
(Final) Step 5: Plugged the washer back in. Ran through a small washing cycle to make sure hose wasn't leaking out of either end.
Read less
-
Kelly from Rockwood, TN
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers
4 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replaced drain hose that was missing
slipped the new drain hose on and with locking plyers slipped the wire clap in place after three trys
-
Delmar from EAST TROY, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers
11 of 18 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fixes Symptom 41% of time
This water inlet valve is for washers. The water inlet valve controls the water flow into the washer. Unplug the washer and shut off the water supply before installing this part. Wear work gloves to protect your hands.
$
63.35
In Stock
PartSelect Number PS12349267
Manufacturer Part Number W11210459
Replacing your Whirlpool Washer Water Inlet Valve
Customer Repair Stories
No cold water
Cold and hot water valve .easy as pie.
-
Greg from HAVELOCK, IA
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers
7 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water would not fill the washer except for 4 inches.
Once we put in the new Water Inlet Valve, the auto sensor works now and I can wash any size load
-
Patricia from MURPHYSBORO, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
37 of 50 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fixes Symptom 9% of time
This clamp helps to prevent leaking by holding the end of water hose in place.
$
9.95
In Stock
PartSelect Number PS11741854
Manufacturer Part Number WP356138