10689593101 Kenmore Ice Maker - Overview
Sections of the 10689593101
[Viewing 7 of 7]Keep searches simple, eg. "belt" or "pump".

Refrigerator Water Filter
PartSelect #: PS8759230
Manufacturer #: F2WC9I1
This genuine OEM replacement part is a water filter for your fridge or freestanding ice maker. The filter is used to remove contaminants and particles from the water, to ensure a clean and fresh taste...
$73.67
In Stock

Refrigerator Switch
PartSelect #: PS12584655
Manufacturer #: W11291138
This is a light switch for your refrigerator. It activates when the door of your appliance is opened, and it will turn the light inside on and off. You will need to replace this part is if your light ...
$27.95
In Stock

Ice Maker Bin Temperature Sensor
PartSelect #: PS11755842
Manufacturer #: WPW10511923
This bin temperature sensor is for ice makers.
The bin temperature sensor monitors the temperature in the ice maker bin and sends the temperature reading to the electronic control board.
Disconn...
$51.95
In Stock

Ice Maker Scoop
PartSelect #: PS12745542
Manufacturer #: W11420408
This ice maker scoop is an OEM refrigerator part designed to retrieve ice from the ice maker bin. It is made of plastic and measures approximately 10 3/4 inches in length and 4 inches in width. The sc...
$16.95
In Stock

Ice Maker Screw
PartSelect #: PS11741613
Manufacturer #: WP3400884
Screw size is 8-18 x 5/8". Used with stand-alone ice cube makers.
$7.95
In Stock

PUMP
PartSelect #: PS16555297
Manufacturer #: W11542867
This circulation pump helps form ice by circulating water over the evaporator plate. Designed for select ice makers, it ensures reliable performance.
$131.18
In Stock

Refrigerator Screw
PartSelect #: PS11742748
Manufacturer #: WP489442
Sold individually.
$11.95
In Stock

Leveling Leg
PartSelect #: PS557020
Manufacturer #: 8193716
Leveling leg Now includes two different sizes. Use the one for your model. If you need two legs you will need to purchase a QTY of two of this kit.
$44.05
In Stock

Screw 818 X 1 1/4
PartSelect #: PS11741614
Manufacturer #: WP3400886
Sold individually.
$9.95
In Stock

Electronic Control Board
PartSelect #: PS12346592
Manufacturer #: W11034363
This genuine OEM Electronic Control Board is a vital component for Whirlpool ice makers. This part masterfully oversees crucial ice maker operations such as freezing a slab of ice, slicing it effectiv...
$249.00
In Stock
Questions And Answers for 10689593101
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Common Symptoms of the 10689593101
[Viewing 1 of 1]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Door switch module wore out
Pull out old module...
Remove 2 wires...
Tape to inside wall [don't want them to fall down into side panel]..
Order new switch..
Fed Ex pkg came on 2nd day..
Install wires on switch...
Press into opening...
Check door light on..[OK]
.. Done
Remove 2 wires...
Tape to inside wall [don't want them to fall down into side panel]..
Order new switch..
Fed Ex pkg came on 2nd day..
Install wires on switch...
Press into opening...
Check door light on..[OK]
.. Done
Parts Used:
-
Fred from Oceanport, NJ
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
40 of 55 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice bin overfilling
I'm an hvac/r technician, and regularly work on ice machines. Begin my pulling the white over beneath the control panel. It snaps in place so pull on the bottom then left out. 1/4 nut driver is all you need, and remove the screw holding the bin thermistor clip to the side. Up to the right , beneath the control panel, behind the plasti
... Read more
c panel you previously removed is the mollex connector. Unplug the thermistor and follow instructions in reverse to reinstall.
Read less
Parts Used:
-
Travis from N CHESTERFLD, VA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
15 of 20 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed to replace a broken light switch
Popping out the broken switch was easy once I was able to see how the new switch part was engineered. The switch was made to be replaced, having a simple tension hook on the bottom of the switch which needed to be depressed to pull the switch out of the cabinet. Once pulled out, there were modular plugs for the power line that were easy
... Read more
to pull off the broken switch and plug into the new switch. Pop the new switch back in and VOILA, the lights worked again! Thanks to part select's good diagrams of the actual model of my refrigerator, it was very easy to hone in on the exact part I needed. I did notice one problem with the order as the correct series for the part was displayed earlier in the process, but had the wrong series later in the process. However,. I trusted the system and the part is for the right series and fit well (an exact match, down to the color). Thanks Part Select, I would definitely use you again.
Read less
Parts Used:
-
Ethan from Fort Collins, CO
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
12 of 18 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!