Back
Back
Keep typing for more specific results...

1030TE (1998) Cub Cadet Snow Blower - Overview

Sections of the 1030TE

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Lawn Mower Hex Washer Head Screw – Part Number: 710-0599
Lawn Mower Hex Washer Head Screw
PartSelect #: PS9298768
Manufacturer #: 710-0599
$4.44
  In Stock
Snow Blower Slide Shoe – Part Number: 784-5580-0637
Snow Blower Slide Shoe
PartSelect #: PS9135084
Manufacturer #: 784-5580-0637
This Slide Shoe is rated as "Easy" to install and requires a wrench set. It is a manufacturer-approved part that comes in black and is constructed of metal. The part is used to help the snowblower sli...
$28.35
  In Stock
Snow Blower Drive Clutch Cable – Part Number: 946-0898
Snow Blower Drive Clutch Cable
PartSelect #: PS9170572
Manufacturer #: 946-0898
$31.08
  In Stock
Snow Blower Auger Clutch Cable – Part Number: 946-0897
Snow Blower Auger Clutch Cable
PartSelect #: PS9170571
Manufacturer #: 946-0897
$26.60
  In Stock
Lawn Mower Plastic Bushing – Part Number: 941-0475
Lawn Mower Plastic Bushing
PartSelect #: PS9167515
Manufacturer #: 941-0475
This is an authentic OEM part for Craftsman lawn and garden equipment. This bushing has an internal diameter of 0.380", is made of durable black plastic, is not part of an assembly or kit, and is sold...
$5.95
  In Stock
Snow Blower Hex Flange Bearing – Part Number: 941-0245
Snow Blower Hex Flange Bearing
PartSelect #: PS9178250
Manufacturer #: 941-0245
Used mainly in snow blowers, this flange bearing is typically installed on the axle and creates a tight fit with little friction while still allowing for movement.?Your equipment will likely feature m...
$9.89
  In Stock
Snow Blower Worm Gear – Part Number: 917-04861
Snow Blower Worm Gear
PartSelect #: PS9165943
Manufacturer #: 917-04861
This is a worm gear that is designed for use within a variety of snowblowers and snowblower tractor attachments. The worm gear is used to rotate the auger through the drive mechanism, also known as th...
$48.35
  In Stock
Engine Fuel Line Clamp – Part Number: 26460
Engine Fuel Line Clamp
PartSelect #: PS8938782
Manufacturer #: 26460
The Fuel Line Clamp is a metal, individually sold part which clamps onto the fuel line, securing it to a port and preventing leaks. Installation is rated as "Easy" by customers and will require pliers...
$5.95
  In Stock
Lawn Mower Washer – Part Number: 936-0119
Lawn Mower Washer
PartSelect #: PS9311087
Manufacturer #: 936-0119
This Washer-Lock 5/16 is a silver, metal part that is sold individually and comes direct from the manufacturer. With a 5/16 Inch Interior Diameter and 1/2 Inch Outside Diameter, it is used to prevent ...
$4.95
  In Stock
Lawn Mower Extension Spring – Part Number: 932-0264
Lawn Mower Extension Spring
★★★★★
★★★★★
(1)
PartSelect #: PS9310931
Manufacturer #: 932-0264
This is a genuine OEM sourced part that is not part of a kit or assembly and is sold individually. This Spring Extension, or Extension Spring, serves a variety of purposes, depending on your model. It...
$5.07
  On Order
Snow Blower Extension Spring – Part Number: 932-0611
Snow Blower Extension Spring
PartSelect #: PS9163468
Manufacturer #: 932-0611
An extension spring is designed to add tension and resistance to different components throughout lawn and garden equipment. This extension spring, also known as an idler spring, is designed for use wi...
$7.97
  In Stock
Snow Blower Extension Spring – Part Number: 932-0710
Snow Blower Extension Spring
PartSelect #: PS9163399
Manufacturer #: 932-0710
$7.97
  In Stock

Questions And Answers for 1030TE

Be the first to ask our experts a question about this model!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Original shave plate badly worn
With WD-40 or equivalent, spray the four nuts on the underside of the snow blower housing that hold the shave plate to the housing. Also spray the two bolts that hold the shave plate to the side of the housing. Let sit for a few minutes and using a 1/2" box end wrench remove the four nuts on the bottom of the housing. If necessary, apply heat with a torch to loosen. Using a 9/16" box end wrench, remove the nuts on the sides (these also hold the adjustable skid feet). It is recommended that the bottom bolts and nuts be replaced with 5/16-18 X 3/4" long zinc plated carriage bolts using zinc plated washers and ny-lock nuts. It is also recommended that all of th screw threads be coated with an anti- seize lubricant so disassembly at a later date will be easy.
Parts Used:
Snow Blower Shave Plate (26 In)
  • John from HARRISVILLE, NH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Wrench set
5 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!