02039 Pressure Washer - Overview
Models starting with 02039
Click on the best match to narrow your results.
- 020390-0 Briggs and Stratton Pressure Washer (2,200 PSI Pressure Washer)
- 020391-0 Briggs and Stratton Pressure Washer (2,200 PSI Pressure Washer)
- 020392-0 Briggs and Stratton Pressure Washer (Briggs & Stratton Pressure Washer Model 020392-0 (0203920, 020392 0) Parts)
- 020393-0 Briggs and Stratton Pressure Washer (2,000 PSI Pressure Washer)
- 020393-0 Murray Pressure Washer (020393-0 - 2,000 Psi Murray)
- 020395-0 Craftsman Pressure Washer (2800 Psi Pressure Washer)
- 020395-0 Briggs and Stratton Pressure Washer (Briggs & Stratton Pressure Washer Model 020395-0 (0203950, 020395 0) Parts)
- 020396-0 Briggs and Stratton Pressure Washer (Briggs & Stratton Pressure Washer Model 020396-0 (0203960, 020396 0) Parts)
- 020399-0 Briggs and Stratton Pressure Washer (2,200 PSI Pressure Washer)
Keep searches simple, eg. "belt" or "pump".
Water Outlet Kit
PartSelect #: PS8911836
Manufacturer #: 201497GS
This is a genuine OEM sourced component which is specially designed for Craftsman pressure washers. It is an identical replacement for a missing or damaged outlet that was originally installed on a ne...
$30.75
In Stock
Chemical Injection Kit
PartSelect #: PS8911045
Manufacturer #: 192914GS
Used to connect the hose that supplies the chemical cleaning solution (soap), this OEM replacement Chemical Injection Kit consists of the brass fittings, a metal ball, a spring, and a rubber seal, and...
$27.40
In Stock
Thermal Relief Valve
PartSelect #: PS9270416
Manufacturer #: 208673GS
Sourced directly from the manufacturer, this part is used to open and release hot water if the water exceeds the maximum operating temperature. It has metal and plastic components, is not part of a ki...
$16.05
In Stock
Kit, Chemical Injection
PartSelect #: PS8908279
Manufacturer #: 190593GS
Sold as a kit including the connector, ball, and spring, this genuine OEM replacement part is used in various models of pressure washers to connect the chemical hose (soap hose) with the pump. It will...
No Longer Available
Air Compressor Key
PartSelect #: PS8928085
Manufacturer #: 23139GS
Designed for use in various models of pressure washers, air compressors, and generators, this Woodruff Key is used to hold a shaft with a mating part, such as a gear. It is 1 inch in length, made of m...
$4.99
In Stock
Garden Hose Filter
PartSelect #: PS9181874
Manufacturer #: B2384GS
This filter, also known as a water inlet screen, is designed for use with pressure washers and has a 1-inch diameter (including the surrounding rubber housing). The filter itself is made of mesh and i...
$4.99
In Stock
Vibe Mount Kit
PartSelect #: PS8910434
Manufacturer #: 192310GS
Frequently referred to as a Vibration Kit, this Vibe Mount Kit includes two durable rubber mounts, two metal washers, two bolts, and two locknuts. This kit is sourced directly from the manufacturer fo...
$10.55
In Stock
Hose
PartSelect #: PS11829845
Manufacturer #: 708962
This replacement hose is a genuine OEM sourced item that specially produced for use with Craftsman pressure washers. This 25 ft. high-pressure hose is made of durable rubber with metal fittings and it...
No Longer Available
Pump Assembly
PartSelect #: PS9270371
Manufacturer #: 207365GS
Pressure washer pump kit. If the pressure washer is leaking water, the pump may need to be rebuilt or replaced. If the pump is more than a few years old, and you use the pressure washer fairly often, replace the pump.
$257.45
In Stock
Exact Part matches for your search term
[Viewing 1 of 1]
Housing Assembly
This part number matches the current model number 02039
PartSelect #: PS10336715
Manufacturer #: 02039
$317.45
Special Order
Common Symptoms of models starting with 02039
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The copper fitting on the chemical injection broke.
I order the part from this site and received it within a week. the only problem was that spring was missing out of the sealed bag. NO PROBLEM!!! I cut a ball point pen spring to fit and everything works just fine. You just have to remember to put the spring in first, then the ball bearing and then the rubber o-ring.If you put them in back
... Read more
wards you pressure will fed directly into your chemical container!!
Read less
Parts Used:
-
Carl from ARCADIA, FL
-
Difficulty Level:Very Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
12 of 17 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Supplied hose has "press on" fitting on one end, washer does not accommodate it
One can either pull off the plastic fitting on one end (the one with an o-ring) and press the plastic tubing onto the pressure washer detergent inlet (located just behind the high pressure hose outlet/connector). The other end of the device is then inserted into a jug of pressure washer detergent and the lowest pressure nozzle or nozzle
... Read more
setting selected to allow detergent to be drawn up into the washwater stream with the pressure washer running. One can observe the detergent flowing into the washer if all is good! If one cannot pull off the plastic fitting on one end (the other fitting, to be left!, has a "screen" on its end - the fitting can be cut off the plastic tubing with a utility knife.
Read less
Parts Used:
-
Anthony from RIDGEFIELD, CT
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
2 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!