Maytag Microwave Sensors
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Maytag Microwave Sensors
Maytag Microwave Range Sensor
PartSelect Number PS11744233
Manufacturer Part Number WP74008369
This sensor detects the temperature within the oven cavity.
Fixes these symptoms
- Little to no heat when baking
- Oven not heating evenly
- See more...
Installation Instructions
Alan from Wallkill, NY
oven temp wrong
Remove the oven door. Remove 3 self tappers on rear wall of oven to take off a round access panel. Pull out a pre-cut rectangle of insulation. Next I removed the 2 screws holding the sensor in place. Pulling the sensor out a bit told me I was "touching" the correct wires in the SMALL rectangular opening. The wires are not visable and 2 hands do not fit in this small opening.I looked at the NEW sensor to see the release on the sensor plug. Slip the angled needle nose into the opening and grasp the plug/release side. The plug pulled apart easily. The sensor wire pulls out with a little bit of twisting to fit it out the hole. The new plug pushes in and has to be worked down to where you can reach it. The same angled plier works to re-attach it. It takes longer to read this than to do the job. Best of luck, Al
Read more...
Maytag Microwave Sensor
PartSelect Number PS11731446
Manufacturer Part Number W10859573
Experience a seamless cooking process with the Whirlpool Oven Temperature Sensor. An essential part for your range, oven or stove, it accurately measures the temperature inside the oven ensuring your meals are cooked to perfection. This genuine OEM part is compatible with various models of Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef. Disconnecting the power before installing this part is highly recommended for safety reasons. Notably, despite the look-alike nature of many parts, minor size and shape variations could occur, hence, kindly verify the part number with your model before ordering. Finally, do consider wearing work gloves during installation to prevent any possible accidents.
Maytag Microwave Humidity Sensor
PartSelect Number PS4224098
Manufacturer Part Number DE32-60011A
Ensure an optimal cooking experience with the Samsung Humidity Sensor Control. This quality component maintains the perfect moisture level inside your microwave, contributing to consistently perfect meals every time. Its function extends to being a Gas Sensor, accurately detecting humidity levels and communicating temperature information to the electronic control board. Installation is effortless and enhances the overall functionality of your microwave. However, due to the high voltage capacitors within the microwave, it is recommended that a service technician performs the installation. Depend on the reliability of genuine Samsung parts for all your appliance repair needs.
Related Maytag Microwave Parts
- All Maytag Microwave parts
- Maytag Microwave Brackets and Flanges
- Maytag Microwave Caps and Lids
- Maytag Microwave Circuit Boards and Touch Pads
- Maytag Microwave Doors
- Maytag Microwave Ducts and Vents
- Maytag Microwave Electronics
- Maytag Microwave Elements and Burners
- Maytag Microwave Fans and Blowers
- Maytag Microwave Filters
- Maytag Microwave Fuses
- Maytag Microwave Glass Tray and Supports
- Maytag Microwave Grilles and Kickplates
- Maytag Microwave Handles
- Maytag Microwave Hardware
- Maytag Microwave Latches
- Maytag Microwave Lights and Bulbs
- Maytag Microwave Motors
- Maytag Microwave Panels
- Maytag Microwave Racks
- Maytag Microwave Seals and Gaskets
- Maytag Microwave Springs and Shock Absorbers
- Maytag Microwave Switches
- Maytag Microwave Thermostats
- Maytag Microwave Transformers
- Maytag Microwave Trays and Shelves
- Maytag Microwave Trims
- Maytag Microwave Wire Plugs and Connectors