Back
Back
Keep typing for more specific results...

Lawn Boy Trimmer Parts

Popular Lawn Boy Trimmer Parts

Your Price
$5.95
   In Stock
Lawn Boy Trimmer Eyelet Guide
PartSelect Number PS8830926
Manufacturer Part Number 107-3344
The Eyelet-Guide allows the cutting line to come out of the spool assembly without damaging the part of the housing that the eyelet is installed in. It attaches in the spool assembly, with the cutting line, and installation is rated as "Easy". If broken, damaged or worn, the line may start rubbing and this is a sign the part should be replaced. This black part comes individually sold. Refer to your make, model or diagram to ensure this is the correct part.
Your Price
$2.99
   In Stock
Lawn Boy Trimmer Compression Spring
★★★★★
★★★★★
1 Review
PartSelect Number PS9103192
Manufacturer Part Number 73-8220
The Compression Spring is a silver metal part, used to keep pressure on the spool. It attaches on top of the spool assembly, and is rated as "Easy" to install. When broken, damaged, or worn, you will have issues with the cutting line advancing and should replace the part. Refer to your make, model and diagram to ensure this is the correct part.
Your Price
$23.06
   In Stock
Lawn Boy Trimmer Large Spool
★★★★★
★★★★★
1 Review
PartSelect Number PS9101288
Manufacturer Part Number 73-8190
The Spool (Large) holds the cutting line (.065 line size recommended) and mounts to the bottom of the trimmer. It is black, plastic, and rated as "Easy" to install by customers. If broken or damaged due to general wear, it should be replaced. Refer to your make, model and diagram to check if this is the part you need.
Your Price
$3.99
   In Stock
Lawn Boy Trimmer Compression Spring
PartSelect Number PS9099899
Manufacturer Part Number 73-8270
This compression spring, also known as a coil spring, is an authentic manufacturer replacement part designed for use in string trimmers. It has tightly wound coils that wrap around the trimmer line spool in the trimmer head assembly. The compression spring helps to keep the trimmer spool under tension. When the trimmer head and spring is pushed upward, the spool rotates and releases new string to replace worn down string. Over time the spring will rust or become damaged due to excessive stress. A faulty compression spring will result in difficulties feeding a new line. You will also notice that the trimmer will have reduced cutting ability. To access the faulty spring, you may need to disassemble the trimmer head assembly. Carefully unwind the coils to release the tension and pull the spring off the line spool. Place the new spring on the line spoil and tightly wind the coils until it is at the desired tension level. Reassemble the trimmer head assembly to complete your repair.
Your Price
$19.60
   On Order
Lawn Boy Trimmer 8 Inch Shield Assembly
PartSelect Number PS8845336
Manufacturer Part Number 114-9004
Presenting the genuine 8" Shield Assembly from the esteemed brand Toro. Designed intricately to perfectly fit on specific Toro models of trimmers, this component ensures enhanced functionality and longer life of your appliance. With a size of 8 inches, this assembly, part of Toro's extensive line-up, underscores durability, resilience and unmatched quality. Shield your trimmer from routine wear and tear, and give it the protection it deserves. Trust Toro's 8" Shield Assembly to keep your trimmer performing optimally for years. Dive into the realm of easy maintenance and assured performance with Toro.
Your Price
$14.40
   In Stock
Lawn Boy Trimmer Drum Cap
PartSelect Number PS8827246
Manufacturer Part Number 105-9422
Your Price
$10.37
   In Stock
Lawn Boy Trimmer 7-in Spool Cap
PartSelect Number PS8829335
Manufacturer Part Number 105-6946
Your Price
$5.91
   In Stock
Lawn Boy Trimmer Small Cap
PartSelect Number PS9101290
Manufacturer Part Number 73-8250
Your Price
$3.99
   In Stock
Lawn Boy Trimmer Eyelet
PartSelect Number PS9168551
Manufacturer Part Number 95-7450
Your Price
$4.60
   In Stock
Lawn Boy Trimmer Extension Spring
★★★★★
★★★★★
1 Review
PartSelect Number PS9256570
Manufacturer Part Number 105-9423
The Extension Spring is a silver metal part, which can be installed using a pair of pliers (Installation is rated as "easy" by customers). This spring goes between the eyelet-guide and the large spool. If broken, damaged or missing, it should be replaced. Refer to your make, model or diagram to check if this is the right part for you.

Lawn Boy Trimmer Appliance Types

Related Lawn Boy Trimmer Parts

Popular Lawn Boy Trimmer Models

Below are the most popular Lawn Boy Trimmer models we have. Enter your model number in the search box to find your model.