Kenmore Microwave Electronics
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Kenmore Microwave Electronics
Your Price
$23.95
In Stock
Kenmore Microwave Diode
PartSelect Number PS12584264
Manufacturer Part Number W11256462
This diode, or high voltage diode, is used in microwaves. It is an electrical current control device that ensures power flows in one direction and not the other way. If your microwave produces no heat, heats inconsistently, or gets noisy, replacing this part can be the solution. The tools needed for this replacement are a nutdriver, pliers, and screwdrivers. First remove the microwave cover, then remove the old part by disconnecting the small thermostat. Replace with the new diode. Remember to use the diagram provided by the manufacturer for more instructions.
Fixes these symptoms
- No heat
- Noisy
- See more...
Installation Instructions
kelvin from san diego, CA
no heat
this problem started two months ago when my micro quit heating up, after all the research most agreed it was the magnetron. taking the micowave apart is not to difficult just make sure you bag all the screws accordingly. the high voltage area is on the right hand side behind a panel. caution there is a capacitor that will bite if your not careful, need to short the circuit between the two connectors with an insulated screw driver it will make a small pop or let it sit for awhile and it will discharge by itself. The magnetron worked for two days then quit, after more research i took it apart again and tightened up all the connections. Worked great on the bench but when i got it back up on the cabinet two dayslater kaput again. so again i take it down and replaced the two cheapest parts in the high voltage system, magnetron thermst fix, and h.v diode. benched tested it this time for 3 days cooking anything that i could think of, worked great. its been one week now afer installtion and it is still working.
Read more...
Your Price
$28.95
In Stock
Kenmore Microwave High Voltage Diode
PartSelect Number PS4235633
Manufacturer Part Number DE91-70063D
This high-voltage diode is designed for use within various makes and models of microwaves and is a genuine OEM part that converts alternating current (AC) into direct current (DC). If you notice your microwave turns on and starts but does not heat anything, this diode is likely responsible. You can check the continuity of the diode with a multimeter before outright replacing it, but it is important to remember that doing any repairs on a microwave and dealing with sensitive electrical components should be done carefully and with the appropriate precautions to avoid any hazards. To replace the high-voltage diode in your microwave, disconnect it from power and allow it to discharge. Using the appropriate screwdrivers, gain access to the control panel of the microwave. Using an insulated screwdriver, release any electrical charge in the capacitor by touching it across the terminals. Then you can remove any hardware securing the diode, including the harness connecting it to the capacitor, which may be easiest done with pliers. Connect the new diode to the capacitor terminal and the securing bracket, and then reassemble your microwave before connecting it to power again.
Fixes these symptoms
- No heat
- See more...
Installation Instructions
Ted from Hudson, NH
Buzzing noise, no heating of food
Removed control panel, discharged HV capacitor. Removed old diode, tested to confirm failure. Replaced part. Other than the removal of the panel swapping the part was almost as easy as replacing a light bulb.
Read more...
Your Price
$41.95
In Stock
Kenmore Microwave Diode Cable
The GE Advantium was another story. Replaced the Magnetron, diode, and capacitor. Oven still did not work so I took it to the dump. No more GE! Read more...
PartSelect Number PS239148
Manufacturer Part Number WB27X10037
Fixes these symptoms
- No heat
- See more...
Installation Instructions
Christopher from Chruchville, MD
Dishwasher would not pump water out. Othre appliance was advantium oven.
Removed the dishwasher. Simple to remove and replace the pump, flapper, and o-ring. Reinstalled dishwasher. It worked!The GE Advantium was another story. Replaced the Magnetron, diode, and capacitor. Oven still did not work so I took it to the dump. No more GE! Read more...
Your Price
$15.95
In Stock
Kenmore Microwave Diode Cable Assembly
PartSelect Number PS3529603
Manufacturer Part Number 6851W1A002E
Usually found kitchen appliances, this OEM-certified diode cable assembly helps to convert power from the transformer to the magnetron, to heat up your food. A damaged cable assembly will cause your appliance to heat food inconsistently or to not work at all. You might notice a burning smell or a loud buzzing sound coming from your appliance. If you do not replace a broken cable assembly, the components that produce heat in your appliance can overheat and fail. To replace your cable assembly, start by unplugging your appliance from any electrical source. Remove any protective casing from the assembly by unthreading any screws or clips. Disconnect the cable assembly from the transformer and the magnetron with pliers. Reinstalling a new cable assembly requires you to reverse the previous steps. Please keep in mind that this cable assembly is sold individually.
Fixes these symptoms
- No heat
- See more...
Your Price
$129.10
In Stock
Kenmore Microwave Magnetron
1. Unplug device.
2. Two people to remove from wall/cabinet (remove two, large, top mounting screws and rotate entire microwave down and off the wall mount). Should be some wood spacers between top of device and bottom of cabinet.
3. Remove screws from sheet metal cover.
4. Remove one screw holding blowers in place and rotate out of the way, in order to gain access to 2 of 5 screws that hold the magnetron in place.
5. Unplug magnetron and remove the 5 screws.
6. Drop in new magnetron and re-assemble microwave in reverse order (steps 5-3).
7. Two people restore micro to wall/cabinet. Replace wood spacers, re-install two, large mounting screws (finger-tight). Test device. Secure the two large screws. Read more...
PartSelect Number PS3529034
Manufacturer Part Number 6324W1A001L
This magnetron in your microwave creates the radiation needed for cooking or warming your food. It is located inside the main cavity, typically near the transformer or waveguide. When the magnetron becomes defective, your food may not heat up properly or heat up at all. Additionally, buzzing or humming sounds may be noticeable while the microwave is in operation. With a malfunctioning magnetron, your microwave loses its primary function. To remove it, you first need to unplug your microwave from its outlet. Before touching any components, discharge the capacitor by placing a screwdriver, with an insulated handle, across the two terminals of the capacitor. Once the capacitor is discharged, replace the current magnetron by disconnecting it from any wires and removing any mounting screws or clips. This magnetron is sold individually and is supplied directly from the original equipment manufacturer.
Fixes these symptoms
- No heat
- See more...
Installation Instructions
Joseph from WILTON, NH
Magnitron failed
Over the stove microwave installed in top cabinet row.1. Unplug device.
2. Two people to remove from wall/cabinet (remove two, large, top mounting screws and rotate entire microwave down and off the wall mount). Should be some wood spacers between top of device and bottom of cabinet.
3. Remove screws from sheet metal cover.
4. Remove one screw holding blowers in place and rotate out of the way, in order to gain access to 2 of 5 screws that hold the magnetron in place.
5. Unplug magnetron and remove the 5 screws.
6. Drop in new magnetron and re-assemble microwave in reverse order (steps 5-3).
7. Two people restore micro to wall/cabinet. Replace wood spacers, re-install two, large mounting screws (finger-tight). Test device. Secure the two large screws. Read more...
Your Price
$49.95
In Stock
Kenmore Microwave Capacitor
PartSelect Number PS2353613
Manufacturer Part Number WB27X11033
Fixes these symptoms
- No heat
- See more...
Installation Instructions
bart from new sarpy, LA
Try to heat food and fuse would blow.
Went on Youtube and pulled up how to fix a microwave.
Read more...
Your Price
$119.26
In Stock
Kenmore Microwave Capacitor
PartSelect Number PS11731152
Manufacturer Part Number W10850446
This authentic high-voltage capacitor stores and supplies electrical energy to the magnetron so that your microwave can heat up your food. It is a cylindrical component located inside the control area of the microwave. If the capacitor malfunctions, you may hear buzzing or humming noises, witness sparks or arcing inside the microwave, or experience inconsistent or no heating of your food. As microwaves use high voltage, exercise extreme caution during the repair process to avoid injury. Even when unplugged, the capacitor retains a significant electrical charge. To replace it, start by unplugging the microwave and removing the glass turntable and support before proceeding. Refer to the user guide for instructions on accessing the capacitor within the cabinet. Discharge the capacitor by creating a short circuit between each terminal and between each terminal and the chassis. Do so by using a pair of insulated-handle needle-nose pliers to simultaneously touch both terminals. Alternatively, you can use a well-insulated screwdriver, touching one terminal and gently sliding it forward to the other terminal, holding it there for a few seconds. Avoid touching the metal part of the tool and be aware that this can result in a loud and startling popping sound. Once discharged, you can safely disconnect the wires and remove the mounting fasteners. Please note that this OEM replacement part is sold individually.
Fixes these symptoms
- No heat
- See more...
Your Price
$38.95
In Stock
Kenmore Microwave Diode
PartSelect Number PS12071314
Manufacturer Part Number 5304509479
Fixes these symptoms
- No heat
- See more...
Installation Instructions
Sean from BETHESDA, MD
Replaced the capacitor. Microwave worked for a few days and then lost heat.
Replaced the diode next to the capacitor. If you replace a capacitor, replace the diode while your in there so you don't have to disassemble and reassemble twice.
Read more...
Your Price
$141.07
On Order
Kenmore Microwave Magnetron
PartSelect Number PS12728994
Manufacturer Part Number 5304521745
Revitalize your Frigidaire wall oven with this genuine OEM MAGNETRON. This key component produces the microwaves that effectively cook food in your microwave oven. With its signature quality, this MAGNETRON magnetron guarantees compatibility with specific models from Frigidaire, Electrolux, White Westinghouse, and Tappan. However, to ensure a perfect fit and optimal function, make certain that your model can accommodate this size and shape before purchase. Due to the high-voltage capacitors in a microwave, we strongly recommend professional installation for this part. With this MAGNETRON, renew your culinary delights with efficiency and ease.
Your Price
$40.86
In Stock
Kenmore Microwave Capacitor
PartSelect Number PS3517241
Manufacturer Part Number 0CZZW1H004B
Discover the essential part for your LG microwave oven: the High Voltage Capacitor. This genuine OEM item from LG is specifically designed for certain models of microwave ovens. The high-quality capacitor is a vital part of the microwave's high-voltage circuit system, storing an electrical charge to support function and performance. But remember, due to safety considerations concerning the high-voltage capacitor's ability to retain a lethal electrical charge even when unplugged, we recommend having this part installed by a qualified service technician. Ensure your appliance operates at peak capacity with this top-notch LG High Voltage Capacitor. Please confirm if this capacitor is suitable for your specific microwave model before purchasing.
Fixes these symptoms
- No heat
- See more...
Related Kenmore Microwave Parts
- All Kenmore Microwave parts
- Kenmore Microwave Brackets and Flanges
- Kenmore Microwave Caps and Lids
- Kenmore Microwave Circuit Boards and Touch Pads
- Kenmore Microwave Doors
- Kenmore Microwave Ducts and Vents
- Kenmore Microwave Elements and Burners
- Kenmore Microwave Fans and Blowers
- Kenmore Microwave Filters
- Kenmore Microwave Fuses
- Kenmore Microwave Glass Tray and Supports
- Kenmore Microwave Grilles and Kickplates
- Kenmore Microwave Handles
- Kenmore Microwave Handles and Latches
- Kenmore Microwave Hardware
- Kenmore Microwave Hinges
- Kenmore Microwave Insulations
- Kenmore Microwave Knobs
- Kenmore Microwave Latches
- Kenmore Microwave Lights and Bulbs
- Kenmore Microwave Manuals and Literatures
- Kenmore Microwave Motors
- Kenmore Microwave Panels
- Kenmore Microwave Power Cords
- Kenmore Microwave Racks
- Kenmore Microwave Seals and Gaskets
- Kenmore Microwave Sensors
- Kenmore Microwave Springs and Shock Absorbers
- Kenmore Microwave Switches
- Kenmore Microwave Thermostats
- Kenmore Microwave Transformers
- Kenmore Microwave Trays and Shelves
- Kenmore Microwave Trims
- Kenmore Microwave Valves
- Kenmore Microwave Wire Plugs and Connectors