Inglis Dishwasher Dishracks
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Inglis Dishwasher Dishracks
Your Price
$10.44
In Stock
Inglis Dishwasher Rack Track Stop
PartSelect Number PS11746591
Manufacturer Part Number WP8565925
The rack track stop on your dishwasher is designed to stop the dish rack at the appropriate place when opening and closing the rack. If your dishwasher is not cleaning your dishes properly, the rack stop may need to be replaced. The replacement part may differ slightly from the broken part, depending on the model. However, the different styles are interchangeable. This product is sold individually and comes in both a white and grey plastic version. Many of our customers found this repair to be very easy and takes less than 30 minutes to complete. Simply snap the old part out and snap the new part into place. You will not require any tools to complete the job. This is an authentic part approved by the manufacturer.
Fixes these symptoms
- Door latch failure
- Door won’t close
- Noisy
- See more...
Installation Instructions
Steven from WASHINGTON, DC
Upper rack wheels had begun to break off. Shoddy design and materials.
I carefully followed the video instructions step by step. They were detailed, clear, and pointed out how to avoid installation mistakes. WIthout the video I would have been tempted to just figure it out myself - ("Hey, I'm a handy guy. How hard could it be, right?"). With the video I sailed right through with no dumb errors. The new rack adjuster wheel set is much sturdier than the Whirlpool original. It made sense to get new rack stops at the same time. Thank you, PartSelect.
Read more...
Your Price
$52.45
In Stock
Inglis Dishwasher Upper Dishrack Track
Now it's like new....!!
My wife is so happy
Removed the track end caps from the tracks so I could pull out the tracks.
Removed the upper wash rack that holds dishes.
Only by removing this rack can the wheels be replaced, if I tried to replace them with the rack attached to the dishwasher I had to bend forward painfully.
Replace the old rales with new ones.
Attach new wheels to the upper rack in such a way as to allow the rack to roll inside the new rales.
Replace the end caps.
Hope it lasts another 10 years Read more...
PartSelect Number PS11741377
Manufacturer Part Number WP3385089
This track attaches to the inside of the tub for the upper rack to glide in and out.
Installation Instructions
morris from Germantown, TN
upper rack would not pull out easily
Replaced both "tracks" and the "wheels" .Now it's like new....!!
My wife is so happy
Removed the track end caps from the tracks so I could pull out the tracks.
Removed the upper wash rack that holds dishes.
Only by removing this rack can the wheels be replaced, if I tried to replace them with the rack attached to the dishwasher I had to bend forward painfully.
Replace the old rales with new ones.
Attach new wheels to the upper rack in such a way as to allow the rack to roll inside the new rales.
Replace the end caps.
Hope it lasts another 10 years Read more...
Your Price
$141.06
In Stock
Inglis Dishwasher Dishrack
PartSelect Number PS12348079
Manufacturer Part Number W11169039
The gray upper dishrack kit is a replacement for select dishwasher models. It securely holds dishes, cups, and utensils during the wash cycle. This kit does not come pre-assembled, so some parts from the original rack may need to be transferred. If your dishwasher does not have an adjustable rack, you will need to reuse the rollers from your old rack. Adjustable rollers may prevent proper alignment with the rear feed tube. This updated version may look slightly different from the original but functions the same.
Installation Instructions
Allen from Jacksonville, NC
Replaced old dish racks that had rusted and had broken tines.
Took the old wheels, and other parts from the old racks and installed them on the new. The wheels on the lower rack just snap on. Also the folding tines just snapped on. On the upper rack the brackets that hold the wheels have two screws that hold the bracket. I removed them and then installed the bracket on the new rack in the same position as on the old one. The only hard part was getting the old spray arm off the old rack. I had no directions so I had to figure it out for myself. I finally cut the the old rack to get the pressure tower off. It was stuck because of having been in place for more than ten years. Putting the tower and the arm on the new rack was no problem once I had it removed. Total time to do the job about 45 minutes.
Read more...
Your Price
$57.59
In Stock
Inglis Dishwasher Silverware Basket
PartSelect Number PS11745477
Manufacturer Part Number WP8268866
This is a basket for washing flatware or silverware in your dishwasher.
Installation Instructions
Larry from Cape Coral,, FL
Missing silverware basket.
I entered the make and model of the dishwasher into the parts store. The part was located and ordered. Received the part a few days later. Fast, efficient way to go!
Read more...
Your Price
$177.65
In Stock
Inglis Dishwasher Upper Dishrack
PartSelect Number PS11753469
Manufacturer Part Number WPW10350382
Wheels NOT included.
Installation Instructions
Paul from WILMINGTON, DE
transfer wheel racks, rack height adjuster and upper wash arm to new rack
The repair was similar to the very good video provided by PartSelect. However, I did make a few changes. The new rack was slightly different in the front side compared to the old rusted rack. After I removed the old rack from the dishwasher, I placed the two racks side-by -side to make sure they were compatible. They were identical in the rear structure and overall size, so I proceeded to change out the wheel racks, rack height adjusters and upper wash arm to the new rack. I suggest transferring each part one at a time so you can get the spacing correct. Also, in my case, many of the items needed to be washed with water to remove soap buildup in these parts before moving to the new rack. I would also suggest putting the upper wash arm (needed in this case) on the new rack last. The total job took me about an hour including washing or rinsing all parts and reassembly. This is an easy job, just take your time and do one item at a time so nothing gets mixed up. I used a drill driver to remove a total of 4 Phillip head screws for the rack height adjusters but a regular Phillip head screw driver would work as well.
Read more...
Your Price
$223.12
In Stock
Inglis Dishwasher Upper Dishrack W/middle Arm And Tube
The upper rack came with some spare parts but no instructions and I could not figure out what they were for or where they went so they remained just that, spare parts. Read more...
PartSelect Number PS11751201
Manufacturer Part Number WPW10253040
This rack provides easy loading with flexibility for small and large items.
Fixes these symptoms
- Not cleaning dishes properly
- See more...
Installation Instructions
Lowell from Vero Beach, FL
Both dishracks needed to be replaced.
Assembled the lower dishrack as per the instructions provided and installed in the dishwasher.The upper rack came with some spare parts but no instructions and I could not figure out what they were for or where they went so they remained just that, spare parts. Read more...
Your Price
$123.92
In Stock
Inglis Dishwasher Silverware Basket
It was the exact basket I needed. No problems! Read more...
PartSelect Number PS12070335
Manufacturer Part Number W11027965
This silverware basket is a manufacturer-approved replacement part for your dishwasher. If your silverware basket is damaged or missing, replace it with this one for an exact fit for your model. The basket can be removed through normal use, so this repair will be very easy. No tools are required to replace the silverware basket.
Fixes these symptoms
- Door latch failure
- Door won’t close
- See more...
Installation Instructions
Vicki from Brookland, AR
My original basket had broken so that I was unable to use one section.
Took old basket out and put new one in. It was the exact basket I needed. No problems! Read more...
Your Price
$51.89
In Stock
Inglis Dishwasher Dishrack Repair Kit
PartSelect Number PS2362274
Manufacturer Part Number 4396840RC
This kit includes vinyl touch-up paint, tip tines, and instructions.
Your Price
$44.11
In Stock
Inglis Dishwasher Dishrack Repair Kit
PartSelect Number PS2362272
Manufacturer Part Number 4396838RC
This kit includes vinyl touch-up paint, tip tines, and instructions.
Your Price
$30.95
Special Order
Inglis Dishwasher Vinyl Touch-up White
PartSelect Number PS11743735
Manufacturer Part Number WP676453
Installation Instructions
John from Eldersburg, MD
My Dishwasher Started Leaking Out The Bottom Of The Impeller Assembly.
I went on line and found the partselect website and was able to identify the defective parts using the schematic drawings. I ordered the parts and in about an hour I had reassembled the dishwasher and had it running again much to the joy of my wife and children. (No more washing dishes by hand!). I also purchased the touch-up paint and tine tips and now the washer looks and runs like it did when I purchased it.
Read more...
Related Inglis Dishwasher Parts
- All Inglis Dishwasher parts
- Inglis Dishwasher Brackets and Flanges
- Inglis Dishwasher Caps and Lids
- Inglis Dishwasher Dispensers
- Inglis Dishwasher Hardware
- Inglis Dishwasher Hoses and Tubes
- Inglis Dishwasher Pumps
- Inglis Dishwasher Seals and Gaskets
- Inglis Dishwasher Spray Arms
- Inglis Dishwasher Switches