Ice Maker Sensors
Popular Ice Maker Sensors
Ice Maker Bin Temperature Sensor
PartSelect Number PS11755842
Manufacturer Part Number WPW10511923
This bin temperature sensor is for ice makers.
The bin temperature sensor monitors the temperature in the ice maker bin and sends the temperature reading to the electronic control board.
Disconnect the power before installing this part. Wear work gloves to protect your hands.
Installation Instructions
Travis from N CHESTERFLD, VA
Ice bin overfilling
I'm an hvac/r technician, and regularly work on ice machines. Begin my pulling the white over beneath the control panel. It snaps in place so pull on the bottom then left out. 1/4 nut driver is all you need, and remove the screw holding the bin thermistor clip to the side. Up to the right , beneath the control panel, behind the plastic panel you previously removed is the mollex connector. Unplug the thermistor and follow instructions in reverse to reinstall.
Read more...
Ice Maker Thermistor
PartSelect Number PS11755741
Manufacturer Part Number WPW10503764
This is a bin thermostat made for standalone ice makers to activate the ice maker shut-off when bin is full. It senses how much ice is in the bin to determine if it should produce more ice or activate shut-off. The bin thermostat may need to be replaced if bin is overfilled, underfilled, or not producing ice. Thermistor can be tested with an ohm meter. This part is made of plastic and metal, and is white in color. This is an authentic part sourced from the original manufacturer.
Installation Instructions
Ray from Terry, MS
Ice maker overfilling with ice and would not stop production when full.
Very easy to replace. Down load the Manual online for a completely operating manual. Thermistor can be tested with an Ohm Meter. Proper values are listed in operating manual.
Read more...
Ice Maker Evaporator Thermistor
PartSelect Number PS11740333
Manufacturer Part Number WP2313635
Used with free-standing ice cube makers.