Ice Maker Hoses and Tubes
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Ice Maker Hoses and Tubes
Your Price
$12.56
In Stock
Ice Maker Water Fill Tube Kit
PartSelect Number PS11739222
Manufacturer Part Number WP2196157
The icemaker water fill tube provides water to the icemaker so it can produce ice and dispense water. If you notice that your ice maker is not making or dispensing ice, or is leaking, you may need to replace the water fill tube. This water fill tube kit comes with a fill tube and a compression nut. This part is made of white plastic and is approximately 10 inches in length. The ice maker water fill tube is in the rear of the fridge. To complete this repair, you will need a 1/4 inch nut driver and a utility knife. Before beginning this repair, you may want to disconnect the water and power supply to the refrigerator.
Fixes these symptoms
- Ice maker not making ice
- Ice maker won’t dispense ice
- Leaking
- See more...
Installation Instructions
Charles from Orland Hills, IL
Broken elbow on icemaker water fill tube.
Removed 2 screws holding water fill tube to rear of refrigerator and pulled out, matched old part with new to make sure of proper match. Guide new fill tube thru hole, making sure it is aligned with slot in ice cube tray on inside of freezer. Install new plastic line from water pump outlet to water fill tube, check for leaks, job done.
Read more...
Your Price
$26.95
In Stock
Ice Maker Refrigerator Water Tube Kit
PartSelect Number PS11730901
Manufacturer Part Number W10823511
This is the replacement water tube kit for your refrigerator. This tubing is made of plastic, is 1/4 inch in diameter, and comes with 2 inserts. This tube may be longer than the original tube, and may need to be cut. This water tube transports water to the ice and water dispensers. If your refrigerator is leaking, or if the ice and water dispensers are not dispensing properly, you may need to replace this tube. This part is sold individually and is an OEM part sourced directly from the manufacturer.
Fixes these symptoms
- Ice maker not making ice
- Leaking
- Not dispensing water
- See more...
Installation Instructions
Trent from Tacoma, WA
water dispenser started leaking
i wasn't sure it was the inlet valve unit because the leak was at the water dispenser in the freezer door. after some research it looked like the water inlet valve located in the back lower part of the refrigerator was the problem. to replace, take off the cardboard cover, about 6 screws, you have access to the water inlet valve, disconnect the hoses (i think it goes without saying that you should have turned off the water to the frig) replace the inlet valve, connect hoses, turn water back on and you'll be back in business. very easy repair.
Read more...
Your Price
$47.20
In Stock
Ice Maker Water Distributor Tube
PartSelect Number PS11738017
Manufacturer Part Number W10863947
The water distributor tube distributes water from the reservoir to the evaporator plate.
Installation Instructions
Gerald from ELMHURST, IL
The tunes were moldy and the pump didn't work.
The repair was fairly easy. Take out screws and lift top of ice maker but do not take off. Having 2 people to do this helps. Clean all parts with calcium deposits. Replace all moldy or broken parts. Some parts are harder to replace. The back screw of the pump is difficult to install. Use a magnetic screw driver for help holding the screw. We used a little wax to keep the screw on the driver. The ice maker works better than it has in 2 years.
Read more...
Your Price
$55.03
In Stock
Ice Maker Refrigerator Ice Maker Fill Tube
Replace fill tube, check to be sure that it entered ice maker properly. Replace hose and clamp.
Replace cover and screws. Read more...
PartSelect Number PS12727858
Manufacturer Part Number W11176463
This fill tube elbow is almost eleven inches long. It is all white in color and is made of plastic. It is used with the icemakers of some refrigerators.
Fixes these symptoms
- Ice maker not making ice
- Leaking
- See more...
Installation Instructions
Richard from Yarmouth, ME
Leak at fill tube
Removed two screws that held cover plate. remove cover plate. Remove water hose, and clamp, by compressing clamp with pliers. Remove fill tube by pulling HARD, from back.Replace fill tube, check to be sure that it entered ice maker properly. Replace hose and clamp.
Replace cover and screws. Read more...
Your Price
$65.44
In Stock
Ice Maker Tube
PartSelect Number PS11750555
Manufacturer Part Number WPW10217922
Introducing the genuine OEM Tube Water Inlet, an essential component designed to enhance the performance of your appliance. Carefully crafted by Whirlpool, this reliable part fits into a selection of Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef models. Its prime function is to supply water to ice makers, ensuring seamless functionality. Please make sure to verify the fit for your particular model before ordering, as similar parts may come with minor size and shape variations. Keep in mind, it's recommended to disconnect power before installation, and donning work gloves can protect your hands. Invest in this durable water inlet tube, an essential that promises longevity and effective operation.
Your Price
$16.95
In Stock
Ice Maker Refrigerator Plastic Tubing
PartSelect Number PS11747816
Manufacturer Part Number WPB5705307
This part supplies water to refrigerator components that require water, such as the ice maker and water dispenser. If you notice a leak coming from your refrigerator, the plastic tubing that feeds your water and ice dispenser might need to be replaced. This part is made of clear plastic and is 1/4 inch thick, and 8 1/2 feet long. Make sure to disconnect power to the refrigerator and shut off the water supply prior to installing this part. Safely store any perishable food items that could deteriorate while the power to the refrigerator is disconnected. Work gloves are recommended to protect your hands during this installation.
Fixes these symptoms
- Leaking
- See more...
Installation Instructions
Michael from Tucson, AZ
leak from back of refrigerator where water line enters ice compartment
replaced old water fill tube for ice maker because it would clog with frozen water which would result in leaking from back of refrigerator where water line for ice maker entered refrigerator. Parts arrived faster than anticipated from parts select. New part was made differently (up-graded) so that water would not freeze. removed old fill tube and replaced with new. replaced water tubing and secured. leak is no longer present and I do not anticipate further issues from this problem. Thanks Parts Select
Read more...
Your Price
$57.11
In Stock
Ice Maker Water Tube
PartSelect Number PS12584270
Manufacturer Part Number W11256498
Introduce the Water Inlet Tube, a vital component designed by Whirlpool to streamline the water supply to a unit's water valve inlet. This genuine OEM part enhances the functionality of your appliance enhancing its durability and performance. Crafted with precision, this part complements some models of brands like Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef. Despite the visual similarity, this part may differ in size and shape from others, hence the need to ascertain its compatibility with your appliance model before purchase. Equip your appliance with this Water Inlet Tube and experience the seamless operation that Whirlpool is known for.
Your Price
$9.95
Special Order
Ice Maker Refrigerator Plastic Tube Insert
Replace fill tube, check to be sure that it entered ice maker properly. Replace hose and clamp.
Replace cover and screws. Read more...
PartSelect Number PS11747809
Manufacturer Part Number WPA3223101
Sold individually.
Fixes these symptoms
- Leaking
- See more...
Installation Instructions
Richard from Yarmouth, ME
Leak at fill tube
Removed two screws that held cover plate. remove cover plate. Remove water hose, and clamp, by compressing clamp with pliers. Remove fill tube by pulling HARD, from back.Replace fill tube, check to be sure that it entered ice maker properly. Replace hose and clamp.
Replace cover and screws. Read more...
Your Price
$39.87
In Stock
Ice Maker Refrigerator Water Line Installation Kit
PartSelect Number PS993036
Manufacturer Part Number 8003RP
This Refrigerator Ice Maker Installation Kit connects the house water supply, to the refrigerator for ice maker and water dispenser operation. This kit includes 15-ft of copper tubing, (1) saddle valve, tape, and (1) tubing connector.
Your Price
$45.11
On Order