Homelite Parts

Homelite Multi-tool Sleeve Sleeves, also known as tool holders/adapters, are used to allow you to connect other accessories to a multi-tool, holding and securing them in the process. This sleeve has an approximately 3/4-inch outer diameter and 1/4-inch inner diameter/bore and is compatible with different models of multi-tool. Because this part is a high-use part, it is recommended that you order multiple to avoid running out in the future. To avoid having to replace it as often, make sure to clean the sleeve after each use and handle it with care. If you notice high wear on the sleeve or have difficulty keeping attachments connected, it likely needs to be replaced. To replace it, you may need an Allen wrench, screwdriver or other tools.

Homelite Edger Air Cleaner Element For P-wle-0799-f2n

★★★★★

★★★★★

1 Review

This foam air cleaner element helps to keep dirt and debris out of the engine in your lawn equipment. It is sometimes called an air filter element, cartridge, or insert. You can find it near the engine in a housing that lets air into the combustion chamber, where it gets mixed with fuel. This fuel-air mixture produces energy that powers the engine when it is ignited by the spark plug. If the element gets dirty or clogged, you will need to replace it. If you do not replace it, you may notice black smoke coming out of your machine. Your engine will work poorly and might use more gas than it should. To remove your element, refer to your user manual for instructions, as the steps may vary from one model to another. Generally, you need to locate the element housing and remove the screws or clips that hold its cover in place. You can then carefully remove the element from inside. This genuine OEM replacement part is sold individually.

Homelite Multi-tool Adapter Blade

Homelite Pressure Washer Detergent Suction Kit

★★★★★

★★★★★

1 Review

This detergent suction kit, also known as a soap or chemical injection kit, is designed for use with a pressure washer. This is a genuine OEM part designed to inject soap into the water stream of your pressure washer, and includes the main injector valve, two differently sized O-rings, a spring, and a ball bearing. One end of this kit will be threaded into the washer, and the other will lead to your cleaner with a siphon, which is sold separately. This injection kit would need to be replaced if the nozzle is leaking, the injector fails to work properly, or water is getting into the soap dispenser. To replace, simply unscrew the previous injector and remove it, then fit the small O-ring inside the threaded end of the new injector, along with the ball bearing and then spring. Wrap the larger O-ring around the base of the threaded end, and apply a layer of lubricant, before installing the new injector and securing it.

Homelite Trimmer Reel Easy Stringhead Assembly This cutting head assembly is for line trimmers. Cutting head assembly attaches to the drive shaft and houses the cutting line. The assembly may include multiple parts; refer to your parts diagram for a complete list of parts included.

Homelite Engine Primer Bulb This is a rubber primer bulb with a plastic adapter attachment that is used on a variety of lawn and garden equipment models. This bulb attaches to the carburetor and is used to pump gasoline from the fuel tank into the gas chamber of the carburetor. Over time and through regular use, the primer bulb will lose its elasticity and may crack, requiring it to be replaced. To replace your primer bulb, you simply need to locate the bulb on your machine, unscrew the housing and remove the bulb, and secure the new one. This bulb is sold as an individual part and has a 2.25cm (7/8-inch) outer-diameter and a 3.33cm (1.3125-inch) height.

Homelite Pressure Washer Outlet Tube This OEM outlet tube, also known as a hose connector, allows pressurized water to flow from the pump of your pressure washer to the nozzle. Connecting the hose to the handle assembly and the spray wand, it is where the water exits from your machine so you can direct the stream towards a desired surface. You can tell if an outlet tube is broken when it has visible cracks or holes and when water leaks or sprays from the connection points or along the tube. A damaged or blocked tube can result in a loss of pressure and potentially premature wear or machine failure. To remove the outlet tube, use a wrench set to unscrew it from the pump. Please note that this replacement part is sold separately from the pump assembly.

Homelite Pressure Washer U-clip Introducing the Homelite U Clip, an essential appliance part ideal for various repair scenarios. This U Clip is ideally made to secure cables, wires, or any other loose components in your Homelite devices. With precision fitting, its design ensures top-notch performance and durability. It also simplifies your repair process, making it easier and quicker. Don't miss this opportunity to elevate your appliance's efficiency and reliability with this Homelite U Clip. Ensure your Homelite devices are working flawlessly and efficiently with this U Clip!

Homelite Edger Bolt

Homelite Outlet Cover (120 Volt)