Frigidaire Cooktop Switches

Your Price

$42.83

Frigidaire Cooktop Burner Switch Kit

★★★★★

9 Reviews

PartSelect Number PS470145

Manufacturer Part Number 5303935086

This is a burner switch kit, also known as the surface element control switch repair kit, for ranges. This burner switch kit sends voltage to the surface element coil and it controls the stove top surface burner. If the following symptoms occur, installing the switch could be the solution to the problem: surface element not heating, overheating, or inconsistent heating. Usually, if the element is not defective, that is a sign there is an issue with the switch. The kit comes with several insert sizes, and includes screws as well. The tools needed for this project are a nut driver, pliers, and screwdrivers.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

George from New Port Richey, FL

High heat reluctant to turn down.

Most of the job is simple fastener mechanics.
Use a nut driver or Phillips screwdriver. Remove rear panel.

Pull out control knob. If it is stuck, wrap a small rag around the back of it and pull the rag steadily.

Carefully match marked terminals on the replacement switch with those on original. Switch terminals may not be in the same location. Replace wires one for one, one at a time.

Carefully select the correct knob filler for the switch post. Several are supplied. Proceed with logic and measure the shaft length and the filler length and type to match. Read more...

Your Price

$66.09

Frigidaire Cooktop Switch

★★★★★

1 Review

PartSelect Number PS16227346

Manufacturer Part Number 5304526190

This is an OEM surface burner switch, which works with cooktops.

Your Price

$73.01

Frigidaire Cooktop Infinite Switch Kit

★★★★★

3 Reviews

PartSelect Number PS444539

Manufacturer Part Number 318191000

This replacement infinite switch is designed to regulate the heat output of a dual-element surface burner on your range or cooktop. It allows for precise temperature control, ensuring consistent and reliable performance during cooking. If a burner fails to heat or remains stuck on a single setting—such as high—this component may be the cause. Compatible with a variety of models across several brands, this switch helps restore full functionality to your appliance.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

peng from FREMONT, CA

Old parts broken

Take picture of current connection diagram. Read more...

Your Price

$70.04

Frigidaire Cooktop Range Switch Kit

PartSelect Number PS1993804

Manufacturer Part Number 903097-9040

Introducing the Frigidaire Range Surface Element Switch kit, an authentic and OEM part that is designed to repair some models of Frigidaire, Electrolux, White Westinghouse, and Tappan stoves, ovens, and ranges. This remarkable Switch Kit plays a pivotal role, allowing you to easily control the heating of the surface element and also turn it on and off. Before installing this part, kindly ensure that the range has been unplugged or the house circuit breaker for the range has been shut off to prevent any unwanted incidents. We recommend wearing work gloves during the installation process to protect your hands. Keep in mind that despite occasional similarities in appearance with other parts, part sizes and shapes may have small variations. Therefore, ensure your part number matches your model before ordering.

Your Price

$70.04

Frigidaire Cooktop Surface Burner Switch - 8 Inch

★★★★★

2 Reviews

PartSelect Number PS2342881

Manufacturer Part Number 318293825

This switch controls the large surface burner. As per manufacture the original screws will damage new switch. New screws are needed.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

Leon from Deer Paerk, TX

switch was not turning off had to jiggle it to go off

no problem slightly different shape than original but labels for wires matched up mounting screws aligned perfectly works great Read more...

Your Price

$73.01

Frigidaire Cooktop Switch

PartSelect Number PS16544327

Manufacturer Part Number 5304527965

This is an authentic dual surface burner switch, which works with cooktops.

Your Price

$70.04

Frigidaire Cooktop Surface Burner Switch

★★★★★

6 Reviews

PartSelect Number PS2342883

Manufacturer Part Number 318293827

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

Gary from Herrick, IL

Burner would consistantly go to high no matter where the dial was positioned.

First I unplugged the stove.Removed the upper control panel back (10 phillips screws). Removed the plastic dial( pulls straight off). Removed the 2 screws behind the dial that is holding the switch in the control panel. Took one wire at a time off the old switch and put them on the new switch according to each electrical spade marking. L1, L2, H1, H2 and P. Installed the new switch in the control panel securing it with the 2 screws. Installed the dial, installed the upper back panel using the old screws. Plugged the stove back in and tested it.
Note: My new switches shaft was 1/8 of an inch longer so it does put the dial a little further away from the control panel. Wife says: It's OK, don't worry about it. Read more...

Your Price

$64.12

Frigidaire Cooktop Burner Infinite Switch - 240v

★★★★★

1 Review

PartSelect Number PS1529263

Manufacturer Part Number 318293818

Your Price

$68.76

Frigidaire Cooktop Surface Element Switch

PartSelect Number PS2342877

Manufacturer Part Number 318293814

This switch controls the stove top surface burner.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

Fred from Redmond, OR

Burner would stay on high heat only. Repairman wanted $278.00 to fix...I bought the switch for under $30.00 delivered and spent 10 minutes fixing it myself.

Turned power off to the stove at breaker box. Pulled the 4 plastic knobs off of the stove. Unscrewed the 4 round parts that are directly under each knob to gain access to the switches. Took the two small phillips screws out holding the bad switch. Installed the wires from the bad switch to the new switch and then reinstalled everything in reverse order. I saved over $200.00 by doing this repair myself with only two screwdrivers. Read more...